journal article·2020-02

Investigation and equalisation of the flow distribution in a fuel cell stack

Florian Bürkle, Florine Moyon, Lukas Feierabend, Jens Wartmann, Angelika Heinzel, Jürgen Czarske, Lars Büttner

Publisher page

Abstract

Abstract The possibility to use fuel cells as an electrical power source makes them interesting for a wide range of applications. In this work, computational fluid dynamics (CFD) simulations and optical measurements are performed to predict the flow distribution in a flow setup resembling the parallel flow circuits in fuel cell stacks. For the first time it is shown that by an adaptation of the port sizes in the inlet manifold to the individual fuel cells, the average global deviation between the flow rates can be reduced from 10.1% to 4.0% by means of a model experiment. The measurements are performed with a high resolution laser Doppler velocity profile sensor (LD-PS) specifically developed for measurements in small-scale channels, in this work 4 × 1 mm 2 , allowing for a spatial resolution below 2 μ m and relative velocity uncertainties below 0.1%, helping to resolve installation effects possibly occurring in fuel cells to improve their efficiency. The presented results can be used by manufacturers to increase the efficiency of their fuel cell stacks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Heat Transfer and Boiling Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Larminie · 2003
2. Effect of flow and temperature distribution on the performance of a pem fuel cell stack10.1016/j.jpowsour.2006.07.030 ↗
3. Pressure and flow distribution in internal gas manifolds of a fuel-cell stack10.1016/S0378-7753(02)00615-8 ↗
4. Performance analysis and optimization of pem fuel cell stacks using flow network approach10.1016/j.jpowsour.2005.01.023 ↗
5. Pressure drop and flow distribution in parallel-channel configuration of fuel cells: U-type arrangement10.1016/j.ijhydene.2008.08.020 ↗
6. Investigation of the flow field inside the manifold of a real operated fuel cell stack using optical measurements and Computational Fluid Mechanics10.1016/j.jpowsour.2015.11.010 ↗
7. Flow distribution in proton exchange membrane fuel cell stacks10.1016/j.jpowsour.2006.06.081 ↗
8. Flow distribution in the manifold of PEM fuel cell stack10.1016/j.jpowsour.2007.05.007 ↗
9. Mesurement of flow maldistribution in parallel channels and its application to ex-situ and in-situ experiments in pemfc water management studies10.1016/j.ijheatmasstransfer.2008.09.025 ↗
10. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
11. Maintaining equal operating conditions for all cells in a fuel cell stack using an external flow distributor10.1016/j.ijhydene.2013.01.022 ↗
12. Cfd analysis of a novel modular manifold with multi-stage channels for uniform air distribution in a fuel cell stack10.1016/j.applthermaleng.2017.06.030 ↗
13. Modeling and design of air-side manifolds and measurement on an industrial 5-kw hydrogen fuel cell stack10.1016/j.ijhydene.2017.06.057 ↗
14. Measurements of air velocities in polymer electrolyte membrane fuel cell channels using electrochemical impedance spectroscopy10.1149/2.0481608jes ↗
15. A simple single camera 3C3D velocity measurement technique without errors due to depth of correlation and spatial averaging for microfluidics10.1088/0957-0233/21/4/045401 ↗
16. A volumetric temperature and velocity measurement technique for microfluidics based on luminescence lifetime imaging10.1007/s00348-018-2616-y ↗
17. Experimental characterization of a fast heating system for microfluidic direct methanol fuel cells
18. Gas-phase particle image velocimetry (PIV) for application to the design of fuel cell reactant flow channels10.1016/j.jpowsour.2006.02.043 ↗
19. A comparative analysis of the uncertainty of astigmatism-μPTV, stereo-μPIV, and μpIV10.1007/s00348-011-1075-5 ↗
20. 14 - laser-optical methods for transport studies in low temperature fuel cells
21. Yarin · 2007
22. Boundary layer velocity measurements by a laser Doppler profile sensor with micrometre spatial resolution10.1088/0957-0233/13/12/324 ↗
23. Precise micro flow rate measurements by a laser Doppler velocity profile sensor with time division multiplexing10.1088/0957-0233/21/7/074005 ↗
24. Velocity measurements inside the concentration boundary layer during copper-magneto-electrolysis using a novel laser Doppler profile sensor10.1016/j.electacta.2011.04.034 ↗
25. Determination of the phase-resolved body force produced by a dielectric barrier discharge plasma actuator10.1088/0022-3727/46/4/042001 ↗
26. In situ calibration of an interferometric velocity sensor for measuring small scale flow structures using a talbot-pattern10.1088/1361-6501/aa8026 ↗
27. Discrete method for design of flow distribution in manifolds10.1016/j.applthermaleng.2015.06.069 ↗
28. Bruus · 2008
29. 2017
30. A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for cfd10.1016/j.ijheatfluidflow.2004.07.005 ↗