journal article·2020-02Open access

How to overcome Na deficiency in full cell using P2-phase sodium cathode – A proof of concept study of Na-rhodizonate used as sodium reservoir

Elena Marelli, Cyril Marino, Christoph Bolli, Claire Villevieille

Abstract

Abstract An organic, cheap and environmental friendly salt, namely disodium rhodizonate Na2C6O6, is tested as Na sacrificial template in a full-cell sodium-ion battery employing a sodium deficient P2 phase, Na0.67Mn0.6Fe0.25Co0.15O2 (NaMFC) as cathode, and a carbonaceous material as counter electrode. As a proof of concept, we demonstrated that the decomposition of the sacrificial organic material leads to enhance the specific capacity in the full-cell system, but the electrochemical results are mitigated by the high irreversibility caused by the side products coming from the sacrificial template decomposition. The mechanism of decomposition of the organic additive as well as its impact on the reaction mechanisms are investigated by online electrochemical mass spectroscopy (OEMS), microscopy and Raman/Infrared vibrational spectroscopy. Additionally, operando X-ray diffraction (XRD) demonstrates that during the oxidation of the disodium rhodizonate, the P2-phase undergoes a re-sodiation, which explains the benefit of Na2C6O6 as Na reservoir.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A high-capacity, low-cost layered sodium manganese oxide material as cathode for sodium-ion batteries10.1002/cssc.201402138 ↗
2. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
3. A new variety of LiCoO2 with an unusual oxygen packing obtained by exchange reaction10.1016/0025-5408(82)90192-1 ↗
4. High-performance P2-type Na2/3(Mn1/2Fe1/4Co1/4)O2 cathode material with superior rate capability for Na-ion batteries10.1002/aenm.201500944 ↗
5. O3-type Na(Mn0.25Fe0.25Co0.25Ni0.25)O2: a quaternary layered cathode compound for rechargeable Na ion batteries10.1016/j.elecom.2014.10.003 ↗
6. Research development on sodium-ion batteries10.1021/cr500192f ↗
7. P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
8. Optimization of Na-ion battery systems based on polyanionic or layered positive electrodes and carbon anodes10.1149/2.0051605jes ↗
9. Aqueous processing of Na0.44MnO2 cathode material for the development of greener Na-ion batteries10.1021/acsami.7b09464 ↗
10. Li7La3Zr2O12 interface modification for Li dendrite prevention10.1021/acsami.6b00831 ↗
11. Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 cathode material with suppressed P2–O2 phase transition toward high-performance sodium-ion battery10.1021/acsami.8b12204 ↗
12. A rechargeable sodium-ion battery using a nanostructured Sb–C anode and P2-type layered Na0.6Ni0.22Fe0.11Mn0.66O2 cathode10.1039/C5RA06336A ↗
13. Insertion compounds and composites made by ball milling for advanced sodium-ion batteries10.1038/ncomms10308 ↗
14. Dual stabilization and sacrificial effect of Na2CO3 for increasing capacities of Na-ion cells based on P2-NaxMO2 electrodes10.1021/acs.chemmater.7b01542 ↗
15. Lithium oxalate as capacity and cycle-life enhancer in LNMO/graphite and LNMO/SiG full cells10.1149/2.0611803jes ↗
16. Towards high energy density, low cost and safe Na-ion full-cell using P2–Na0.67[Fe0.5Mn0.5]O2 and Na2C4O4 sacrificial salt10.1016/j.electacta.2019.134693 ↗
17. Highly efficient, cost effective, and safe sodiation agent for high-performance sodium-ion batteries10.1002/cssc.201801099 ↗
18. Cathode properties of Na2C6O6 for sodium-ion batteries10.1016/j.electacta.2013.04.100 ↗
19. High-performance sodium–organic battery by realizing four-sodium storage in disodium rhodizonate10.1038/s41560-017-0014-y ↗
20. Manipulation of disodium rhodizonate: factors for fast-charge and fast-discharge sodium-ion batteries with long-term cyclability10.1002/adfm.201504537 ↗
21. Impact of cobalt content in Na0.67MnxFeyCozO2 (x + y + z = 1), a cathode material for sodium ion batteries10.1039/C7RA00566K ↗
22. Biowaste lignin-based carbonaceous materials as anodes for Na-ion batteries10.1149/2.0681807jes ↗
23. Co-free P2–Na0.67Mn0.6Fe0.25Al0.15O2 as promising cathode material for sodium-ion batteries10.1021/acsaem.8b01015 ↗
24. How reliable is the Na metal as a counter electrode in Na-ion half cells?10.1039/C8CC07852A ↗
25. Can metallic sodium electrodes affect the electrochemistry of sodium-ion batteries? Reactivity issues and perspectives10.1002/cssc.201901056 ↗
26. On the reliability of sodium metal anodes: the influence of neglected parameters10.1149/2.0161914jes ↗
27. Impact of water-based binder on the electrochemical performance of P2-Na0.67Mn0.6Fe0.25Co0.15O2 electrodes in Na-ion batteries10.3390/batteries4040066 ↗
28. Vibrational spectra and structure of the rhodizonate dianion10.1039/j29710000627 ↗
29. Resonance Raman scattering and the Jahn-Teller effect of oxocarbon ions10.1016/S0301-0104(78)85245-8 ↗
30. LiNi0.4Mn1.6O4/Electrolyte and carbon black/electrolyte high voltage interfaces: to evidence the chemical and electronic contributions of the solvent on the cathode-electrolyte interface formation10.1149/2.052211jes ↗
31. Characterization of PVDF membranes by vibrational spectroscopy10.1016/S0376-7388(02)00407-6 ↗
32. Ionic conductivity, lithium insertion and extraction of lanthanum lithium titanate10.1016/S0167-2738(01)00884-0 ↗
33. Solid-state linear polarized IR-spectroscopy of croconic and rhodizonic acids
34. Souza · J. Braz. Chem. Soc. · 2015 · 26 · 1247
35. A reassessment of rhodizonic acid as a qualitative reagent10.1007/BF01225955 ↗
36. Disodium rhodizonate: a powder diffraction study10.1107/S1600536805030552 ↗
37. Anion redox chemistry in the cobalt free 3d transition metal oxide intercalation electrode Li[Li0.2Ni0.2Mn0.6]O210.1021/jacs.6b05111 ↗
38. Differential electrochemical mass spectrometry study of the interface of xLi2MnO3·(1–x)LiMO2 (M = Ni, Co, and Mn) material as a positive electrode in Li-ion batteries10.1021/cm502201z ↗
39. Oxygen release and its effect on the cycling stability of LiNixMnyCozO2 (NMC) cathode materials for Li-ion batteries10.1149/2.0021707jes ↗
40. Decomposition of LiPF6 in high energy lithium-ion batteries studied with online electrochemical mass spectrometry10.1149/2.0981606jes ↗
41. Origin of H2 evolution in LIBs: H2O reduction vs. Electrolyte oxidation10.1149/2.1151605jes ↗
42. The photochemistry of the rhodizonate dianion in aqueous solution10.1139/v91-079 ↗
43. Chemistry of the oxocarbons10.1002/ijch.198000088 ↗
44. In situ X-ray diffraction characterisation of Fe0.5TiOPO4 and Cu0.5TiOPO4 as electrode material for sodium-ion batteries10.1016/j.electacta.2015.06.105 ↗
45. He · J. Electrochem. Soc. · 2016 · 163 · A8310.1149/2.0201602jes ↗
46. He · 2017
47. Operando monitoring of F– formation in lithium ion batteries10.1021/acs.chemmater.8b03810 ↗