Nickel-copper based anodes for solid oxide fuel cells running on hydrogen and biogas: Study using ceria-based electrolytes with electronic short-circuiting correction
Source abstract
Abstract
Abstract Cermet compositions based on Nickel–Copper alloys with gadolinium doped ceria as the ceramic matrix, Ni1-xCuxO (x = 0, 0.4 and 0.8 mol%) with 50 wt% CGO (Ce0.9Gd0.1O1.95), are assessed as possible anodes for SOFCs operating in H2 and biogas fuels. Equivalent circuit modelling is employed to evaluate the total polarisation resistance of cermet anodes with correction of data for electronic short-circuiting that may arise when using Ce0.9Gd0.1O1.95 (CGO) electrolytes under reducing conditions. Data analysis highlights that presence of electronic leakage in CGO electrolyte can lead to severe underestimation of total polarisation resistance in the case of H2 fuel, with this deviation becoming more serious with increasing temperature. In contrast, less significant effects are noted under biogas in similar conditions, due to a less reducing nature of this fuel. The results underscore that anode characteristics are highly dependent on the effective oxygen partial pressure of working gas atmosphere and that suitable correction of data is imperative before discussion. Corrected values for polarisation resistance in each fuel reveal the Nickel–Copper alloy cermet with copper content of x = 0.4 to be beneficial under the biogas atmosphere, while, conversely, the pure Ni-cermet is shown to be the peak performing composition in H2 fuel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
2. Overview of livestock biogas technology development and implementation in Thailand10.1016/j.esd.2013.03.004 ↗
3. Hydrocarbon steam reforming on Ni alloys at solid oxide fuel cell operating conditions10.1016/j.cattod.2008.03.028 ↗
4. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
5. Oxide anode materials for solid oxide fuel cells10.1016/j.ssi.2006.07.012 ↗
6. A review on the status of anode materials for solid oxide fuel cells10.1016/S0921-5093(03)00620-8 ↗
7. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
8. A review of dry (CO2) reforming of methane over noble metal catalysts10.1039/C3CS60395D ↗
9. Dry reforming of methane over supported noble metals: a novel approach to preparing catalysts10.1016/S1566-7367(03)00130-4 ↗
10. Carbon-tolerant Ni-based cermet anodes modified by proton conducting yttrium- and ytterbium-doped barium cerates for direct methane solid oxide fuel cells10.1039/C5TA06488K ↗
11. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
12. Overview of current development in electrical energy storage technologies and the application potential in power system operation10.1016/j.apenergy.2014.09.081 ↗
13. Ni1−xCux alloy-based anodes for low-temperature solid oxide fuel cells with biomass-produced gas as fuel10.1016/j.jpowsour.2006.05.025 ↗
14. Electrochemical assessment of one-step Cu-CGO cermets under hydrogen and biogas fuels10.1016/j.matlet.2016.12.087 ↗
15. Study on new copper-containing SOFC anode materials10.1016/S0925-8388(01)01795-9 ↗
16. Electrodeposition of Cu into a highly porous Ni ∕ YSZ cermet10.1149/1.2208908 ↗
17. Synergistic effects of Ni1−xCox-YSZ and Ni1−xCux-YSZ alloyed cermet SOFC anodes for oxidation of hydrogen and methane fuels containing H2S10.1016/j.jpowsour.2008.05.002 ↗
18. Fabrication and characterization of Cu-Ni-YSZ SOFC anodes for direct use of methane via Cu-electroplating10.1016/j.ijhydene.2009.04.060 ↗
19. Mitigation of carbon deposits formation in intermediate temperature solid oxide fuel cells fed with dry methane by anode doping with barium10.1016/j.jpowsour.2009.01.096 ↗
20. NiCu–Zr0.1Ce0.9O2−δ anode materials for intermediate temperature solid oxide fuel cells using hydrocarbon fuels10.1016/j.jpowsour.2013.01.022 ↗
21. Electrochemical performances of Ni1−xCux/SDC cermet anodes for intermediate-temperature SOFCs using syngas fuel10.1016/j.ijhydene.2016.05.070 ↗
22. Investigation of Ni-based alloy/CGO electro-catalysts as protective layer for a solid oxide fuel cell anode fed with ethanol10.1007/s10800-015-0849-5 ↗
23. Development and characterisation of (Ni, Cu, Co)-YSZ and Cu-Co-YSZ cermets anode materials for SOFC application10.1016/j.surfcoat.2007.09.009 ↗
24. A combustion synthesis method to obtain alternative cermet materials for SOFC anodes10.1016/S0167-2738(01)00744-5 ↗
25. Designing experiments for the preparation of Ni-GDC cermets with controlled porosity as SOFC anode materials: effects on the electrical properties10.1016/j.ceramint.2018.09.115 ↗
26. Preparation of one-step NiO/Ni-CGO composites using factorial design10.1016/j.ceramint.2016.08.131 ↗
27. A novel method for preparing anode cermets for solid oxide fuel cells10.1149/1.1392586 ↗
28. Methane on-cell reforming by alloys reduced from Ni0.5Cu0.5Fe2O4 for direct-hydrocarbon solid oxide fuel cells10.1149/2.097404jes ↗
29. FexCo0.5−xNi0.5–SDC anodes for low-temperature solid oxide fuel cells10.1016/j.electacta.2005.08.039 ↗
30. Ni–Cu/Ce0.9Zr0.1O2 bimetallic cermets for electrochemical and catalytic applications10.1016/j.ijhydene.2013.12.035 ↗
31. Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: a case study of ceria10.1111/j.1551-2916.2005.00740.x ↗
32. Reducibility of Ce1−xGdxO2−δ in prospective working conditions10.1016/j.jpowsour.2007.04.060 ↗
33. Necessity of verification of leakage currents using Sm doped Ceria electrolytes in SOFCs10.1007/s10853-006-6371-8 ↗
34. Effect of interfacial resistance on determination of transport properties of mixed‐conducting electrolytes10.1149/1.1836892 ↗
35. Interfacial polarization characteristics of Pt | BaCe0.8Gd0.2O3 | Pt cells at intermediate temperatures10.1149/1.1838048 ↗
36. Investigation of oxygen exchange kinetics in proton-conducting ceramic fuel cells: effect of electronic leakage current using symmetric cells10.1016/j.jpowsour.2013.05.108 ↗
37. NiO–CGO in situ nanocomposite attainment: one step synthesis10.1016/j.jpowsour.2010.11.026 ↗
38. Effect of composition on the structural development and electrical conductivity of NiO-GDC composites obtained by one-step synthesis10.1016/j.ceramint.2017.04.027 ↗
39. Structure, microstructure and corrosion properties of brush-plated Cu–Ni alloy10.1007/s10800-009-9899-x ↗
40. Transport in ceria electrolytes modified with sintering aids: effects on oxygen reduction kinetics10.1007/s10008-004-0509-x ↗
41. Advances in solid oxide fuel cells: review of progress through three decades of the international symposia on solid oxide fuel cells10.1149/07801.0063ecst ↗
42. Stability of metal oxides against Li/Na carbonates in composite electrolytes10.1039/C4RA11446A ↗
43. Robie · 1995
44. Methane to syngas conversion: Part I. Equilibrium conditions and stability requirements of membrane materials10.1016/j.jpowsour.2003.11.067 ↗
45. Redox of Ni/YSZ anodes and oscillatory behavior in single-chamber SOFC under methane oxidation conditions10.1016/j.electacta.2011.05.053 ↗
46. n‐Type conductivity in gadolinia‐doped ceria10.1149/1.1837395 ↗
47. Electrical properties and reducibilities of ceria-rare earth oxide systems and their application to solid oxide fuel cell10.1016/0167-2738(89)90061-1 ↗
48. Electronic transport in Ce0.8Sm0.2O1.9−δ ceramics under reducing conditions10.1016/S0013-4686(03)00395-5 ↗
49. First-principles investigations of electrochemical oxidation of hydrogen at solid oxide fuel cell operating conditions10.1149/1.2752983 ↗
50. Methane oxidation over M–8YSZ and M–CeO2/8YSZ (M = Ni, Cu, Co, Ag) catalysts10.1007/s10562-005-9185-4 ↗
51. A direct-methane fuel cell with a ceria-based anode10.1038/23220 ↗