journal article·2019-09Open access

Synthesis and characterization of organic agar-based membranes for microbial fuel cells

Giovanni Hernández-Flores, Andreu Andrio, Vicente Compañ, Omar Solorza-Feria, Héctor Mario Poggi-Varaldo

Abstract

[EN] The goal of this work was the synthesis and characterization of agar membranes for microbial fuel cells applications. Three sets of membranes were synthesized. For a first set of membranes (2, 4, 6, and 8 wt% agar concentration), both proton conductivity (sigma) and O-2 permeability (OP) increased as a function of agar concentration, up to 4 wt% agar. Beyond this concentration, the a levelled-off at 2.43 mS cm(-1) and OP increased. A second one set was obtaining by mixing 2, 4, 6, and 8 wt% concentrations of agar with KC110 wt%. Both a and OP increased as a function of increased agar concentration; nevertheless, the presence of KCl slightly affected in a negative way the OP. For the last set, agar concentration was fixed at 2 wt%, while KCl concentration was increased to 2, 4, 6, 8, and 10 wt%. The a did not significantly increase with salt concentration and the worst values of OP were observed. It was thus confirmed that agar concentration plays a significant role in the increase of a, but KCl does not improve membrane performance. Moreover, the agar membranes cost is two orders of magnitude lower than Nafion (R) 117. Therefore, the best membranes were those produced solely with agar.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Advanced battery technologies research · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Nanocomposite SPEEK-based membranes for direct methanol fuel cells at intermediate temperatures10.1016/j.memsci.2015.05.055 ↗
2. Thermal stability of Nafion in simulated fuel cell environments10.1149/1.1836669 ↗
3. Semi-interpenetrating polymer network electrolyte membranes composed of sulfonated poly (ether ether ketone) and organosiloxane-based hybrid network10.1016/j.jpowsour.2011.08.113 ↗
4. Effects of membrane cation transport of pH and microbial fuel cell performance10.1021/es060387r ↗
5. A review of advanced materials for proton exchange membrane fuel cells10.1021/ef501977k ↗
6. Review of the proton exchange membranes for fuel cell applications10.1016/j.ijhydene.2010.05.017 ↗
7. On the methanol permeability through pristine Nafion® and Nafion/PVA membranes measured by different techniques. A comparison of methodologies10.1002/fuce.201100004 ↗
8. A review of polymer electrolyte membrane fuel cell durability test protocols10.1016/j.jpowsour.2011.07.082 ↗
9. Effect of external resistance on bacterial diversity and metabolism in cellulose-fed microbial fuel cells10.1016/j.biortech.2010.05.012 ↗
10. Membrane-less cloth cathode assembly (CCA) for scalable microbial fuel cells10.1016/j.bios.2009.05.032 ↗
11. Improvement of microbial fuel cell performance by selection of anodic materials and enrichment of inoculum10.14447/jnmes.v18i3.357 ↗
12. PEMFC performance of MEAS based on nafion and Spsebs hybrid membranes
13. Continuous flowing membraneless microbial fuel cells with separated electrode chambers10.1016/j.biortech.2011.07.056 ↗
14. Microbial fuel cells come of age10.1002/jctb.2570 ↗
15. Microfiltration membrane performance in two-chamber microbial fuel cells10.1016/j.bej.2010.08.007 ↗
16. Performance of electron acceptors in catholyte of a two-chambered microbial fuel cell using anion exchange membrane10.1016/j.biortech.2010.11.038 ↗
17. Improved fuel cell and electrode designs for producing electricity from microbial degradation10.1002/bit.10501 ↗
18. Microbial fuel cells (MFCs) with interpolymer cation exchange membranes10.1016/j.seppur.2004.04.009 ↗
19. Microbial challenges and harnessing the metabolic activity of bacteria can provide energy for a variety of applications, once technical and cost obstacles are overcome10.1021/es0627592 ↗
20. Separator characteristics for increasing performance of microbial fuel cells10.1021/es901631p ↗
21. An overview of electrode materials in microbial fuel cells10.1016/j.jpowsour.2011.01.012 ↗
22. Development of MFC using sulphonated polyether ether ketone (SPEEK) membrane for electricity generation from waste water10.1016/j.biortech.2011.09.021 ↗
23. Recent progress in electrodes for microbial fuel cells10.1016/j.biortech.2011.07.019 ↗
24. Muller · 2003 · vol. 4
25. U. Stimming
26. SPEEK/functionalized silica composite membranes for polymer electrolyte fuel cells10.1016/j.jpowsour.2007.04.026 ↗
27. Electricity generation using membrane and salt bridge microbial fuel cells10.1016/j.watres.2005.02.002 ↗
28. New approach for the evaluation of membranes transport properties for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2012.01.108 ↗
29. Rapid determination of oxygen permeability of polymer membranes10.1021/i160027a022 ↗
30. Oxygen permeability of hidrogel contact lenses with organosilicon moieties10.1016/S0142-9612(02)00012-1 ↗
31. Permeability and diffusional studies on silicone polymer networks with controlled dangling chains10.1016/0032-3861(96)81604-1 ↗
32. Oxygen transport through methacrylate based hydrogels with potential biological capability10.1016/0142-9612(96)84945-3 ↗
33. Oxygen, water and sodium chloride transport in soft contact lenses materials10.1002/jbm.b.33762 ↗
34. Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells10.1007/s00253-005-0066-y ↗
35. Batch operation of a microbial fuel cell equipped with alternative proton exchange membrane10.1016/j.ijhydene.2015.06.057 ↗
36. Bioelectricity production from municipal leachate in a microbial fuel cell: effect of two cathodic catalysts10.1016/j.ijhydene.2014.05.178 ↗
37. Comparison of alternative membranes to replace high cost Nafion ones in microbial fuel cells10.1016/j.ijhydene.2016.08.206 ↗
38. Logan · 2007
39. Tafel equation based model for the performance of a microbial fuel cell10.1016/j.ijhydene.2015.06.119 ↗
40. Use of novel permeable membrane and air cathodes in acetate microbial fuel cells10.1016/j.electacta.2009.11.086 ↗
41. Characterization and comparison of the performance of two different separator types in air–cathode microbial fuel cell treating synthetic wastewater10.1016/j.cej.2013.05.014 ↗
42. Dual gas diffusion cathode design for microbial fuel cell (MFC): optimizing the suitable mode of operation in terms of bioelectrochemical and bioelectro‐kinetic evaluation10.1002/jctb.4613 ↗
43. Assessment of expanded polystyrene as a separator in microbial fuel cell10.1080/09593330.2018.1435740 ↗
44. A comprehensive impedance journey to continuous microbial fuel cells10.1016/j.bioelechem.2015.04.008 ↗
45. Use of novel reinforced cation exchange membranes for microbial fuel cells10.1016/j.electacta.2015.07.042 ↗
46. Bioelectrochemical treatment of acid mine drainage dominated with iron10.1016/j.jhazmat.2012.09.062 ↗
47. Electricity generation with simultaneous wastewater by a microbial fuel cell (MFC) with Cu and Cu-Au electrodes10.1002/jctb.1723 ↗
48. Characterization of uncharged and sulfonated porous poly(vinylidene fluoride) membranes and their performance in microbial fuel cells10.1016/j.memsci.2014.03.061 ↗
49. Evaluation of bioelectrogenic potential of four industrial effluents as substrate for low cost microbial fuel cells operation10.30638/eemj.2016.203 ↗