journal article·2019-09

Boosting thermoelectric power factor of free-standing Poly(3,4ethylenedioxythiophene):polystyrenesulphonate films by incorporation of bismuth antimony telluride nanostructures

Meetu Bharti, Ajay Singh, Gajender Saini, Sudeshna Saha, Anil Bohra, Yuki Kaneko, A.K. Debnath, K.P. Muthe, Kazuhiro Marumoto, D.K. Aswal, S.C. Gadkari

Publisher page

Abstract

Abstract We demonstrate that introduction of p-type Bi0.5Sb1.5Te3 nanostructures into the polymer matrix not only causes highly adherent drop-casted films of PEDOT:PSS (on Kapton sheets) to attain a free-standing nature but also brings a significant improvement in their thermoelectric properties. Hall and ESR measurements of these hybrid films clearly show that both the carrier concentration and mobility can be varied with Bi0.5Sb1.5Te3 content. Whereas, results of X-ray diffraction, Raman and X-ray photoelectron spectroscopy confirm the enhancement in chain alignment and better connectivity among PEDOT:PSS and Bi0.5Sb1.5Te3 nanosheets; leading to remarkable enhancement of electrical conductivity. These hybrid films, due to energy filtering of charge carriers at the organic/inorganic interface, exhibit improvement in the Seebeck coefficient also. In fact, such a synergetic combination of improved electrical conductivity and Seebeck coefficient expertly tailors the power factor (from order of ~10−4 to 8.3 μW/mK2) over a vast range. The optimized films are tested for their power conversion ability and a single thermoelement based device exhibits an open circuit voltage ~536 μV and current ~134 μA for a temperature difference of 53 °C. Such an evolution of organic-inorganic hybrid films in a flexible, free-standing motif with enhanced thermoelectric properties exhibit good potential for recovering heat from the curved hot surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Recent progress in thermoelectric materials10.1007/s11434-014-0237-2 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Towards high-performance polymer based thermoelectric materials10.1039/c3ee24193a ↗
4. Thermoelectric plastics: from design to synthesis, processing and structure–property relationships10.1039/C6CS00149A ↗
5. Towards polymer-based organic thermoelectric generators10.1039/c2ee22777k ↗
6. Conductive polymers for thermoelectric power generation10.1016/j.pmatsci.2017.09.004 ↗
7. Recent progress on PEDOT-based thermoelectric materials10.3390/ma8020732 ↗
8. Poly(3,4-ethylenedioxythiophene) as promising organic thermoelectric materials: a mini-review10.1016/j.synthmet.2012.04.005 ↗
9. Promising thermoelectric properties of commercial PEDOT:PSS Materials and their Bi2Te3 powder composites10.1021/am100654p ↗
10. Facile preparation and thermoelectric properties of Bi2Te3 based alloy nanosheet/PEDOT:PSS composite films10.1021/am5002772 ↗
11. Enhancement of thermoelectric properties of PEDOT:PSS and tellurium-PEDOT:PSS hybrid composites by simple chemical treatment10.1038/srep18805 ↗
12. Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)10.1038/nmat3012 ↗
13. Role of interchain coupling in the metallic state of conducting polymers10.1103/PhysRevLett.109.106405 ↗
14. Enhancing thermoelectric properties of organic composites through hierarchical nanostructures10.1038/srep03448 ↗
15. Single crystal poly(3,4-ethylenedioxythiophene) nanowires with ultrahigh conductivity10.1021/nl500748y ↗
16. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
17. Key issues in development of thermoelectric power generators: high figure-of-merit materials and their highly conducting interfaces with metallic interconnects10.1016/j.enconman.2016.01.065 ↗
18. Solution processed organic thermoelectrics: towards flexible thermoelectric modules10.1039/C4EE03297G ↗
19. Flexible thermoelectric materials and device optimization for wearable energy harvesting
20. Water-processable polymer-nanocrystal hybrids for thermoelectrics10.1021/nl102880k ↗
21. Dohyuk Y, Jeonghun K, and Jung HK. Direct synthesis of highly conductive PEDOT:PSS/graphene composites and their applications in energy harvesting systems. Nano Research, DOI 10.1007/s12274-014-0433-z.
22. Bottom-up design of de novo thermoelectric hybrid materials using chalcogenide resurfacing10.1039/C6TA09781B ↗
23. Thermoelectric fabrics: toward power generating clothing10.1038/srep06411 ↗
24. Thermoelectric power generation using nonwoven fabric module impregnated with conducting polymer PEDOT:PSS10.1016/j.synthmet.2017.01.001 ↗
25. Enhanced thermoelectric performance of PEDOT:PSS flexible bulky papers by treatment with secondary dopants10.1021/am507032e ↗
26. Kirigami-inspired conducting polymer thermoelectrics from electrostatic recognition driven assembly10.1021/acsnano.8b02489 ↗
27. Imaging the phase separation between PEDOT and polyelectrolytes during processing of highly conductive PEDOT:PSS films10.1021/acsami.5b05439 ↗
28. Elucidating the mechanisms behind thermoelectric power factor enhancement of Poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) flexible films10.1016/j.vacuum.2018.04.017 ↗
29. High conductivity Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) films and its applications in polymer optoelectronic devices10.1002/adfm.200400016 ↗
30. Controlled growth of bismuth antimony telluride BixSb2-xTe3 nanoplatelets and their bulk thermoelectric nanocomposites
31. Efficient preparation of ultralarge graphene oxide using a PEDOT:PSS/GO composite layer as hole transport layer in polymer-based optoelectronic devices10.1039/C4RA09474C ↗
32. Enhancement of thermoelectric properties of PEDOT:PSS and tellurium-PEDOT:PSS hybrid composites by simple chemical treatment10.1038/srep18805 ↗
33. Skotheim · 1998
34. Electron spin resonance absorption in metals. II. Theory of electron diffusion and the skin effect10.1103/PhysRev.98.349 ↗
35. Electrical transport and EPR investigations: a comparative study for d.c. conduction mechanism in monovalent and multivalent ions doped polyaniline10.1007/s12034-012-0351-1 ↗
36. Photoinduced charge carriers in conjugated polymer–fullerene composites studied with light-induced electron-spin resonance10.1103/PhysRevB.59.8019 ↗
37. Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material10.1038/nnano.2008.83 ↗
38. Manufacturing Te/PEDOT films for thermoelectric applications10.1021/acsami.7b03710 ↗
39. A synthetic approach for enhanced thermoelectric properties of PEDOT:PSS bulk composites10.1063/1.4933254 ↗