Syngas production performance and degradation analysis of a solid oxide electrolyzer stack
Source abstract
Abstract
Abstract A short stack of the Julich F10 design with anode-supported cells (ASCs; in fuel cell mode), based on the Julich design with a lanthanum strontium cobalt ferrite (LSCF) air electrode, was employed for a medium-term co-electrolysis operation in technically-relevant conditions at 800 °C. The feed and product gases for an identically-constructed stack under the same conditions were monitored by a process-grade gas analysis system analyzing all relevant gases, including water per direct measurement. The product gas composition conforms to the expectation based on electrolysis and the reverse water-gas shift (RWGS) reaction for a wide range of conversion ratios. The formation of methane as a by-product is discussed. The degradation for stationary phases of the experiment amounted to ∼2% kh−1 (voltage degradation) and 4% kh−1 (based on area specific resistance (ASR)), respectively. Based on the evaluation of electrochemical impedance spectra and post-mortem analyses, the degradation is induced by the depletion of nickel near the electrolyte interface which must be urgently resolved. A hypothesis for an electrochemical mechanism is postulated that complements existing theories. The mass transport contributes the most to the total impedance and the porosity in our cathodes should be optimized for electrolysis mode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Molten salt chemistry and electrochemical processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Review of energy system flexibility measures to enable high levels of variable renewable electricity10.1016/j.rser.2015.01.057 ↗
2. Power to gas: technological overview, systems analysis and economic assessment for a case study in Germany10.1016/j.ijhydene.2015.01.123 ↗
3. Power-to-Gas: Electrolyzers as an alternative to network expansion – an example from a distribution system operator10.1016/j.apenergy.2017.10.117 ↗
4. Renewable Power-to-Gas: a technological and economic review10.1016/j.renene.2015.07.066 ↗
5. Power to liquid and power to gas: an option for the German Energiewende10.1016/j.rser.2015.01.049 ↗
6. A review of projected power-to-gas deployment scenarios10.3390/en11071824 ↗
7. Power-to-fuel as a key to sustainable transport systems – an analysis of diesel fuels produced from CO 2 and renewable electricity10.1016/j.fuel.2017.05.061 ↗
8. Electrofuels for the transport sector: a review of production costs10.1016/j.rser.2017.05.288 ↗
9. Syngas and synfuels from H 2 O and CO 2 : current status10.1002/cite.201400090 ↗
10. Techno-economic analysis of a co-electrolysis-based synthesis process for the production of hydrocarbons10.1016/j.apenergy.2018.02.007 ↗
11. Hydrogen and synthetic fuel production from renewable energy sources10.1016/j.ijhydene.2007.04.042 ↗
12. Syngas production via high-temperature steam/CO2 co-electrolysis: an economic assessment10.1039/c0ee00092b ↗
13. Efficiency analysis of a hydrogen-fueled solid oxide fuel cell system with anode off-gas recirculation10.1016/j.jpowsour.2016.08.002 ↗
14. Comparison of efficiencies of low, mean and high temperature fuel cell Systems10.1016/j.ijhydene.2011.05.122 ↗
15. Solid oxide fuel cell, stack and system development status at Forschungszentrum julich10.1149/06801.0157ecst ↗
16. Electrochemical performance and preliminary post-mortem analysis of a solid oxide cell stack with 20,000 h of operation10.1149/2.0541802jes ↗
17. Performance and degradation of solid oxide electrolysis cells in stack10.1149/06801.3491ecst ↗
18. Assessment of sulfur poisoning of Ni/CGO-Based SOFC anodes10.1149/07710.0149ecst ↗
19. Silica segregation in the Ni∕YSZ electrode10.1149/1.2733861 ↗
20. Long-term degradation of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ IT-SOFC cathodes due to silicon poisoning10.1016/j.ssi.2016.01.005 ↗
21. Carbon deposition in solid oxide cells during co-electrolysis of H2O and CO210.1149/2.079403jes ↗
22. Degradation of solid oxide cells during co-electrolysis of steam and carbon dioxide at high current densities10.1016/j.jpowsour.2016.08.055 ↗
23. Relation between Ni particle shape change and Ni migration in Ni-YSZ electrodes - a hypothesis10.1002/fuce.201600222 ↗
24. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
25. Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich10.1016/j.jpowsour.2010.09.041 ↗
26. SOFC stack performance under high fuel utilization10.1016/j.ijhydene.2014.11.094 ↗
27. Sol-gel thin-film electrolyte anode-supported SOFC - from layer development to stack testing10.1149/05701.0959ecst ↗
28. Solid oxide electrolyzer stack with 20,000 h of operation10.1149/07801.2885ecst ↗
29. Influence of the discretization methods on the distribution of relaxation times deconvolution: Implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
30. Goodwin · 2018
31. Gordon · 1971
32. McBride · 1993
33. CO and CO 2 methanation over supported Ni catalysts10.1016/j.cattod.2016.12.036 ↗
34. Enhanced activity of CO2 methanation over Ni/CeO2-ZrO2 catalysts: Influence of preparation methods10.1016/j.cattod.2016.07.020 ↗
35. Electrochemical analysis of reformate-fuelled anode supported SOFC10.1149/1.3597177 ↗
36. Modelling study of surface reactions, diffusion, and spillover at a Ni/YSZ patterned anode10.1149/1.3095477 ↗
37. Evidence of proton transport in atomic layer deposited yttria-stabilized zirconia films10.1021/cm1017536 ↗
38. Opportunities and challenges in materials development for thin film solid oxide fuel cells10.1002/fuce.200800034 ↗