journal article·2018-05Open access

Lanthanum doped strontium titanate - ceria anodes: deconvolution of impedance spectra and relationship with composition and microstructure

Dariusz Burnat, Gunnar Nurk, Lorenz Holzer, Michal Kopecki, Andre Heel

Abstract

Abstract Electrochemical performance of ceramic (Ni-free) SOFC anodes based on La0.2Sr0.7TiO3-δ (LST) and Gd0.1Ce0.9O1.95-δ (CGO) is thoroughly investigated. Microstructures and compositions are systematically varied around the percolation thresholds of both phases by modification of phase volume fractions, particle size distributions and firing temperature. Differential impedance spectroscopy was performed while varying gas composition, electrical potential and operating temperature, which allows determining four distinct electrode processes. Significant anode impedances are measured at low frequencies, which in contrast to the literature cannot be linked with gas concentration impedance. The dominant low frequency process (∼1 Hz) is attributed to the chemical capacitance. Combined EIS and microstructure investigations show that the chemical capacitance correlates inversely with the available surface area of CGO, indicating CGO surface reactions as the kinetic limitation for the dominant anode process and for the associated chemical capacitance. In anodes with a fine-grained microstructure this limitation is significantly smaller, which results in an impressive power output as high as 0.34 Wcm−2. The anodes show high redox stability by not only withstanding 30 isothermal redox cycles, but even improving the performance. Hence, compared to conventional Ni-cermet anodes the new LST-CGO material represents an interesting alternative with much improved redox-stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Alternative anode material for gradual methane reforming in solid oxide fuel cells10.1016/S0167-2738(00)00390-8 ↗
2. Discovery and characterization of novel oxide anodes for solid oxide fuel cells10.1002/tcr.20003 ↗
3. RedOx study of anode-supported solid oxide fuel cell10.1016/j.jpowsour.2008.12.118 ↗
4. Oxide anode materials for solid oxide fuel cells10.1016/j.ssi.2006.07.012 ↗
5. Fuel cells: the amazing perovskite anode10.1038/nmat892 ↗
6. Nickel agglomeration in solid oxide fuel cells: the influence of temperature10.1016/j.ssi.2012.01.015 ↗
7. Microstructure degradation of cermet anodes for solid oxide fuel cells: quantification of nickel grain growth in dry and in humid atmospheres10.1016/j.jpowsour.2010.08.017 ↗
8. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
9. Stability of materials as candidates for sulfur-resistant anodes of solid oxide fuel cells10.1149/1.2198107 ↗
10. A solid oxide fuel cell operating on hydrogen sulfide (H 2S) and sulfur-containing fuels10.1016/j.jpowsour.2004.03.061 ↗
11. Highly sulfur tolerant Cu-ceria anodes for SOFCs10.1149/1.1896469 ↗
12. Sulfur tolerant anodes for SOFCs10.1149/1.1627452 ↗
13. Chemical degradation and poisoning mechanism of cermet anodes in solid oxide fuel cells10.1149/1.3205748 ↗
14. A study of carbon formation and prevention in hydrocarbon-fueled SOFC10.1016/j.jpowsour.2005.05.001 ↗
15. Carbon deposition on Ni/YSZ composites exposed to humidified methane10.1016/j.apcata.2006.10.040 ↗
16. The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes10.1016/j.jpowsour.2009.09.046 ↗
17. Degradation of SOFC anodes upon redox cycling: a comparison between Ni/YSZ and Ni/CGO10.1149/1.3271101 ↗
18. Characterisation of Ni-YSZ-cermets with respect to redox stability10.1002/fuce.200700007 ↗
19. Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells10.1016/j.ijhydene.2010.10.038 ↗
20. Impact of 'redox' cycles on performances of solid oxide fuel cells: case of the electrolyte supported cells10.1016/j.jpowsour.2009.10.099 ↗
21. Electrochemical impedance investigation of the redox behaviour of a Ni–YSZ anode10.1016/j.jpowsour.2006.11.052 ↗
22. Dimensional behavior of Ni-YSZ composites during redox cycling10.1149/1.3046121 ↗
23. Redox cycling of Ni-Based solid oxide fuel cell anodes: a review10.1002/fuce.200600028 ↗
24. Advanced anodes for high-temperature fuel cells10.1038/nmat1040 ↗
25. Ceria revisited: electrolyte or electrode material?
26. A new anode for solid oxide fuel cells with enhanced OCV under methane operation10.1039/B617266K ↗
27. Catalytic and electrochemical properties of doped lanthanum chromites as new anode materials for solid oxide fuel cells10.1111/j.1151-2916.2001.tb01004.x ↗
28. A sulfur-tolerant anode material for SOFCs Gd2Ti 0.4Mo0.6O710.1149/1.1945370 ↗
29. Electronic conduction mechanism in yttria-stabilized zirconia-titania under reducing atmospheres10.1149/1.1837276 ↗
30. Structural and electrical characterization of titania-doped YSZ10.1016/S0955-2219(96)00172-0 ↗
31. Double-perovskite anode materials Sr2MMo0.6 (M = Co, Ni) for solid oxide fuel cells10.1021/cm8033643 ↗
32. Degree of order and redox balance in B-site ordered double-perovskite oxides, Sr2MMoO 6-δ (M=Mg, Mn, Fe, Co, Ni, Zn)10.1016/j.jssc.2010.03.004 ↗
33. Synthesis and characterization of Sr2MgMoO6-δ10.1149/1.2195882 ↗
34. Electrical properties of yttrium-doped strontium titanate under reducing conditions10.1149/1.1420706 ↗
35. Thermal, electrical, and electrocatalytical properties of lanthanum-doped strontium titanate10.1016/S0167-2738(02)00140-6 ↗
36. Enhancing electronic conductivity in strontium titanates through correlated a and B-Site doping10.1021/cm103489r ↗
37. Electrochemical characterization and redox behavior of Nb-doped SrTiO310.1016/j.ssi.2008.10.011 ↗
38. Synthesis and performance of A-site deficient lanthanum-doped strontium titanate by nanoparticle based spray pyrolysis10.1016/j.jpowsour.2011.10.088 ↗
39. Burnat · 2012
40. Y-doped SrTiO3 based sulfur tolerant anode for solid oxide fuel cells10.1016/j.jpowsour.2006.11.048 ↗
41. Strontium titanate-based composite anode for solid oxide fuel cells10.1149/1.3050390 ↗
42. B-site doping of lanthanum strontium titanate for solid oxide fuel cell anodes10.1016/j.jpowsour.2010.11.067 ↗
43. Electrochemical studies of capacitance in cerium oxide thin films and its relationship to anionic and electronic defect densities
44. Oxidation of H2, CO and syngas mixtures on ceria and nickel pattern anodes10.1016/j.apenergy.2015.05.049 ↗
45. Modelling of elementary kinetics of H2 and CO oxidation on ceria pattern cells10.1016/j.electacta.2015.09.027 ↗
46. Electrochemical oxidation of syngas on nickel and ceria anodes10.1016/j.electacta.2017.01.074 ↗
47. Mixed conductor anodes: Ni as electrocatalyst for hydrogen conversion10.1016/S0167-2738(02)00393-4 ↗
48. Surface reaction and transport in mixed conductors with electrochemically-active surfaces: a 2-D numerical study of ceria10.1039/C0CP01219J ↗
49. Interfacial reaction phenomenon between La0.25Sr0.75TiO3 and ScSZ10.1016/j.jpowsour.2013.07.066 ↗
50. Effect of interaction between a-site deficient LST and ScSZ on electrochemical performance of SOFC10.1149/2.0131503jes ↗
51. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells10.1016/j.jpowsour.2010.08.006 ↗
52. Holzer · 2010
53. Nickel-Zirconia anode degradation and triple phase boundary quantification from microstructural analysis10.1002/fuce.200800147 ↗
54. A versatile salt evaporation reactor system for SOFC operando studies on anode contamination and degradation with impedance spectroscopy10.1016/j.jpowsour.2010.11.023 ↗
55. Holtappels · 1998 · 311
56. La2Zr2O7 formation and oxygen reduction kinetics of the La0.85Sr0.15MnyO3, O2 (g) YSZ system
57. Characterization of composite SOFC cathodes using electrochemical impedance spectroscopy10.1016/S0013-4686(99)00134-6 ↗
58. Oxygen reduction on lanthanum strontium manganites investigated by the use of cone shaped electrodes10.1007/BF02375527 ↗
59. McEvoy · 1995 · 127
60. Determination of the reaction zone in gadolinia-doped ceria anode for solid oxide fuel cell10.1149/1.2975322 ↗
61. Gas conversion impedance: a test geometry effect in characterization of solid oxide fuel cell anodes10.1149/1.1838654 ↗
62. Gas concentration impedance of solid oxide fuel cell anodes10.1149/1.2720639 ↗
63. Gas concentration impedance of solid oxide fuel cell anodes: I. stagnation point flow geometry10.1149/1.2205150 ↗
64. The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes10.1016/j.ssi.2006.10.020 ↗
65. Gas diffusion impedance in characterization of solid oxide fuel cell anodes10.1149/1.1392015 ↗
66. Electrochemical behaviors of mixed conducting oxide anodes for solid oxide fuel cells10.1149/1.2901047 ↗
67. Oxidation of hydrogen on Ni/yttria-stabilized zirconia cermet anodes. Journal of the Electrochemical Society
68. Ni catalyst for hydrigen conversion in gadolinia-doped ceria anodes for solid oxide fuel cells10.1149/1.1514234 ↗
69. Micro-modelling of solid oxide fuel cell electrodes10.1016/S0013-4686(97)00063-7 ↗
70. Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells10.1149/1.1393220 ↗
71. Geometrical modeling of the triple-phase-boundary in solid oxide fuel cells10.1016/j.jpowsour.2004.08.046 ↗
72. Simulation of a composite cathode in solid oxide fuel cells10.1016/j.electacta.2003.12.015 ↗
73. The effect of water content on the electrochemical impedance response and microstructure of Ni-CGO anodes for solid oxide fuel cells10.1016/j.jpowsour.2008.12.150 ↗
74. Reaction process in the Ni-SDC cermet anode10.5796/electrochemistry.77.190 ↗
75. Protons in ceria and their roles in SOFC electrode reactions from thermodynamic and SIMS analyses10.1016/j.ssi.2004.05.030 ↗
76. A method to separate process contributions in impedance spectra by variation of test conditions10.1149/1.2790791 ↗
77. Evaluation of Ca doped La0.2Sr0.7TiO3 as an alternative material for use in SOFC anodes10.1149/2.001212jes ↗
78. Development of improved nickel catalysts for sorption enhanced CO2 methanation10.1016/j.ijhydene.2016.09.045 ↗
79. Smart material concept: reversible microstructural self-regeneration for catalytic applications10.1039/C6TA03417A ↗