Nanoporous palladium anode for direct ethanol solid oxide fuel cells with nanoscale proton-conducting ceramic electrolyte
Source abstract
Abstract
Abstract In this work, we demonstrate the operation of micro-solid oxide fuel cells (μ-SOFCs) with nanoscale proton-conducting Y-BaZrO 3 (BZY) electrolyte to avoid the fuel crossover problem for direct ethanol fuel cells (DEFCs). The μ-SOFCs are operated with the direct utilisation of ethanol vapour as a fuel and Pd as anode at the temperature range of 300–400 °C. The nanoporous Pd anode is achieved by DC sputtering at high Ar pressure of 80 mTorr. The Pd-anode/BYZ-electrolyte/Pt-cathode cell show peak power densities of 72.4 mW/cm 2 using hydrogen and 15.3 mW/cm 2 using ethanol at 400 °C. No obvious carbon deposition is seen from XPS analysis after fuel cell test with ethanol fuel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Catalysts for direct ethanol fuel cells10.1016/j.jpowsour.2007.04.009 ↗
2. Review: direct ethanol fuel cells10.1016/j.ijhydene.2012.07.059 ↗
3. Testing PtRu/CNF catalysts for a high temperature polybenzimidazole-based direct ethanol fuel cell. Effect of metal content
4. Different anode catalyst for high temperature polybenzimidazole-based direct ethanol fuel cells10.1016/j.ijhydene.2012.06.113 ↗
5. Effects of crossover on product yields measured for direct ethanol fuel cells10.1016/j.electacta.2010.02.007 ↗
6. Ethanol/water mixture permeation through a Nafion® based membrane electrode assembly10.1016/j.jpowsour.2006.10.009 ↗
7. Performance of an intermediate-temperature fuel cell using a proton-conducting Sn0.9In0.1P2O7 electrolyte10.1149/1.2183927 ↗
8. Readily processed protonic ceramic fuel cells with high performance at low temperatures10.1126/science.aab3987 ↗
9. Towards the next generation of solid oxide fuel cells operating below 600 °C with chemically stable proton-conducting electrolytes10.1002/adma.201103102 ↗
10. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
11. Towards the next generation of solid oxide fuel cells operating below 600 °C with chemically stable proton-conducting electrolytes10.1002/adma.201103102 ↗
12. Proton-conducting micro-solid oxide fuel cells with improved cathode reactions by a nanoscale thin film gadolinium-doped ceria interlayer10.1038/srep22369 ↗
13. Proton-conducting oxides10.1146/annurev.matsci.33.022802.091825 ↗
14. Palladium-based electrocatalysts for alcohol oxidation in half cells and in direct alcohol fuel cells10.1021/cr9000995 ↗
15. Performance and carbon deposition over Pd nanoparticle catalyst promoted Ni/GDC anode of SOFCs in methane, methanol and ethanol fuels10.1016/j.ijhydene.2012.07.089 ↗
16. Direct ethanol fuel cells for transport and stationary applications – a comprehensive review10.1016/j.apenergy.2015.02.002 ↗
17. Synthesis and stability of Pd@CeO2Core–Shell catalyst films in solid oxide fuel cell anodes10.1021/cs4004112 ↗
18. Methane-fueled thin film micro-solid oxide fuel cells with nanoporous palladium anodes10.1016/j.jpowsour.2011.03.093 ↗
19. Platinum 2008 interim review10.1595/147106709X400074 ↗
20. Evidence of proton transport in atomic layer deposited yttria-stabilized zirconia films10.1021/cm1017536 ↗
21. High-performance ultrathin solid oxide fuel cells for low-temperature operation10.1149/1.2372592 ↗
22. Chemical stability study of nanoscale thin film yttria-doped barium cerate electrolyte for micro solid oxide fuel cells10.1016/j.jpowsour.2014.06.128 ↗
23. Intermediate-temperature ceramic fuel cells with thin film yttrium-doped barium zirconate electrolytes10.1021/cm900820p ↗
24. Effect of crystallinity on proton conductivity in yttrium-doped barium zirconate thin films10.1016/j.ssi.2011.07.004 ↗
25. Direct observation of nanoscale Pt electrode agglomeration at the triple phase boundary10.1021/acsami.5b00134 ↗
26. Direct utilization of ethanol on ceria-based anodes for solid oxide fuel cells10.1002/apj.182 ↗
27. Low temperature thin film solid oxide fuel cells with nanoporous ruthenium anodes for direct methane operation10.1039/c1ee01310f ↗
28. Thermal stabilities of nanoporous metallic electrodes at elevated temperatures10.1016/j.jpowsour.2007.09.066 ↗