Impact of land width and channel span on fuel cell performance
Source abstract
Abstract
Abstract The impact of land width and channel span on fuel cell performance was tested on 50 cm2 flow fields. Combinations of land widths and channel spans of 0.25, 0.5 and 1.0 mm were evaluated. Polarization curves and high-frequency resistance were measured for several humidity levels for each of the flow fields. For performance at high current density, the land width was found to be the dominant factor. Reductions to the smallest size tested (0.25 mm) continued to showed improvement over wider lands. Adequate land fraction (preferably about 50%) needs to be provided to minimize contact resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. S.G. Goebel, Nested bipolar plate for fuel cell and method, US Patent 6974648 (2005).
2. S.G. Goebel, J.A. Rock, Reactant feed for nested stamped plates for a compact fuel cell, US Patent 7291414 (2007).
3. M. Oda, M. Mohri, H. Ohta, Y. Watanabe, S. Tanimoto, N. Saito, Fuel cell, US Patent Application 2008/0292941 (2008).
4. F. Blank, T. Kunick, M. Schudy, Bipolar plate and fuel cell unit, US Patent Application 2009/0325036 (2009).
5. Effects of channel and rib width of flow field plates on the performance of a PEMFC10.1016/j.ijhydene.2005.04.008 ↗
6. Investigation on the influence of channel geometries on PEMFC performance10.1016/j.jpowsour.2005.05.099 ↗
7. Separate measurements of current density under the channel and the shoulder in PEM fuel cells10.1016/j.jpowsour.2008.01.091 ↗
8. Optimization of PEM fuel cell flow field via local current density measurement10.1016/j.ijhydene.2009.12.116 ↗
9. Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials10.1016/j.jpowsour.2006.06.092 ↗