journal article·2015-08

Polybenzimidazole membranes for direct methanol fuel cell: Acid-doped or alkali-doped?

Long-Yun Li, Bor-Chern Yu, Chao-Ming Shih, Shingjiang Jessie Lue

Publisher page

Abstract

Abstract Polybenzimidazole (PBI) films immersed in 2 M phosphoric acid (H 3 PO 4 ) or 6 M potassium hydroxide (KOH) solution form electrolytes for conducting proton or hydroxide, respectively. A direct methanol fuel cell (DMFC) with the alkali-KOH doped PBI gives 117.9 mW cm −2 of power output which is more than 2 times greater than the power density of 46.5 mW cm −2 with the H 3 PO 4 -doped PBI (vs.) when both of the DMFCs use a micro porous layer (MPL) in a gas-fed cathode and a MPL-free anode and are operated at 90 °C. When the MPL-free anode and cathode are used and the fuel flow rate is tripled, the peak power density of alkaline DMFC reaches 158.9 mW cm −2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Overview of hybrid membranes for direct-methanol fuel-cell applications10.1016/j.ijhydene.2009.12.054 ↗
2. A review of polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2007.03.044 ↗
3. Recent progress in direct partial oxidation of methane to methanol
4. Electrooxidation of methanol, ethanol and 1-propanol on Pd electrode in alkaline medium10.1016/S1452-3981(23)15253-9 ↗
5. Research and development on polymeric membranes for fuel cells: an overview
6. Fuel cells for portable applications10.1016/S0378-7753(01)01069-2 ↗
7. Influence of silica content in sulfonated poly(arylene ether ether ketone ketone) (SPAEEKK) hybrid membranes on properties for fuel cell, application10.1016/j.polymer.2006.09.001 ↗
8. Polysulfone ionomers for proton conducting fuel cell membranes: sulfoalkylated polysulfones10.1016/j.memsci.2003.10.033 ↗
9. Acid-doped polybenzimidazoles, a new polymer electrolyte10.1149/1.2044337 ↗
10. A polymer electrolyte for operation at temperatures up to 200°C10.1149/1.2054875 ↗
11. Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI)10.1016/S1388-2481(00)00107-7 ↗
12. The role of hydrogen bonding in rigid-rod polymers: the crystal structure of a polybenzobisimidazole model compound10.1016/S0032-3861(00)00242-1 ↗
13. Roll-to-roll coated PBI membranes for high temperature PEM fuel cells10.1039/c2ee02936g ↗
14. A direct methanol fuel cell using acid doped polybenzimidazole as polymer electrolyte10.1007/BF00241516 ↗
15. Alkali doped polybenzimidazole membrane for high performance alkaline direct ethanol fuel cell10.1016/j.jpowsour.2008.04.010 ↗
16. High DMFC performance output using modified acid–base polymer blend10.1016/j.ijhydene.2008.01.033 ↗
17. A two-phase model of an intermediate temperature PEM fuel cell10.1016/j.ijhydene.2006.10.061 ↗
18. Physicochemical properties of phosphoric acid doped polybenzimidazole membranes for fuel cells10.1016/j.memsci.2005.10.005 ↗
19. Performance of a vapor-fed polybenzimidazole (PBI)-based direct methanol fuel cell10.1021/ef8001839 ↗
20. Direct methanol fuel cell membranes from Nafion–polybenzimidazole blends10.1016/j.jpowsour.2005.11.056 ↗
21. Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells10.1149/1.1630037 ↗
22. PBI-based polymer membranes for high temperature fuel cells–preparation, characterization and fuel cell demonstration10.1002/fuce.200400020 ↗
23. Hydrocarbon proton conducting polymers for fuel cell catalyst layers10.1039/c0ee00638f ↗
24. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
25. High temperature proton exchange membranes base on polybenzimidazole for fuel cells10.1016/j.progpolymsci.2008.12.003 ↗
26. Quaternized polyethersulfone cardo anion exchange membranes for direct methanol alkaline fuel cells10.1016/j.memsci.2005.07.009 ↗
27. An assessment of alkaline fuel cell technology10.1016/S0360-3199(01)00181-1 ↗
28. Alkali doped polyvinyl alcohol/multi-walled carbon nano-tube electrolyte for direct methanol alkaline fuel cell10.1016/j.memsci.2011.04.026 ↗
29. A feasibility analysis for alkaline membrane direct methanol fuel cell: thermodynamic disadvantages versus kinetic advantages10.1016/S1388-2481(03)00148-6 ↗
30. Influence of membrane properties on the transient behavior of polymer electrolyte fuel cells10.1016/j.jpowsour.2014.06.065 ↗
31. Electro-osmotic drag of water in ionomeric membranes new measurements employing a direct methanol fuel cell10.1149/1.1837940 ↗
32. Methanol electrooxidation on supported Pt and PtRu catalysts in acid and alkaline solutions10.1016/S0013-4686(02)00340-7 ↗
33. Methanol oxidation at platinum electrodes in alkaline solution: comparison between supported catalysts and model systems10.1016/j.jelechem.2004.06.007 ↗
34. Investigation of methanol oxidation on unsupported platinum electrodes in strong alkali and strong acid10.1016/S0378-7753(98)00012-3 ↗
35. Review: an overview of recent development of platinum based cathode materials for direct methanol fuel cells10.1016/S1452-3981(23)08193-2 ↗
36. Methanol-resistant oxygen-reduction catalysts for direct methanol fuels10.1146/annurev.matsci.33.072302.093511 ↗
37. Alkali doped polybenzimidazole membrane for alkaline direct methanol fuel cell
38. MEA for alkaline direct ethanol fuel cell with alkali doped PBI membrane and non-platinum electrodes10.1016/j.jpowsour.2008.11.118 ↗
39. Durability study of KOH doped polybenzimidazole membrane for air-breathing alkaline direct ethanol fuel cell10.1016/j.jpowsour.2010.11.104 ↗
40. Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices10.1016/j.ijhydene.2009.06.013 ↗
41. A Pd impregnated nanocomposite Nafion membrane for use in high-concentration methanol fuel in DMFC10.1016/S1388-2481(03)00130-9 ↗
42. Electrocatalytic oxygen reduction reaction
43. Enhanced performance of a direct methanol alkaline fuel cell (DMAFC) using a polyvinyl alcohol/fumed silica/KOH electrolyte10.1016/j.jpowsour.2010.06.049 ↗
44. MEA design for low water crossover in air-breathing DMFC10.1016/j.electacta.2007.07.044 ↗
45. Preparation and properties of nanocomposite membranes of polybenzimidazole/sulfonated silica nanoparticles for proton exchange membranes10.1016/j.memsci.2009.01.045 ↗
46. Plasma modification on a Nafion membrane for direct methanol fuel cell applications10.1007/BF02706747 ↗
47. Modeling water states in polyvinyl alcohol-fumed silica nano-composites10.1016/j.polymer.2008.11.026 ↗
48. Sorption of organic solvents in poly(dimethyl Siloxane) membrane. I. Permeant states quantification using differential scanning calorimetry10.1080/00222340500251162 ↗
49. Permeation of xylene isomers through supported liquid membranes containing cyclodextrins10.1081/SS-120000799 ↗
50. Permeant transport properties and cell performance of potassium hydroxide doped poly(vinyl alcohol)/fumed silica nanocomposites10.1016/j.memsci.2010.11.009 ↗
51. Crystallinity and stability of poly(vinyl alcohol)-fumed silica mixed matrix membranes
52. Novel quaternized polyvinyl alcohol/quaternized chitosan nano-composite as an effective hydroxide-conducting electrolyte10.1016/j.memsci.2015.02.043 ↗
53. Polytetrafluoroethylene (PTFE)/silane cross-linked sulfonated poly(styrene-ethylene/butylene-styrene) (sSEBS) composite membrane for direct alcohol and formic acid fuel cells10.1016/j.memsci.2014.03.076 ↗
54. Direct borohydride fuel cell performance using hydroxide-conducting polymeric nanocomposite electrolytes10.1002/polb.23250 ↗
55. Phosphoric acid-doped cross-linked porous polybenzimidazole membranes for proton exchange membrane fuel cells
56. Synthesis and characterization of acid-doped polybenzimidazole membranes by sol–gel and post-membrane casting method10.1016/j.memsci.2010.04.010 ↗
57. Sulfonated polyphosphazene-polybenzimidazole membranes for DMFCs10.1149/1.1874692 ↗
58. Permeabilities of methanol, ethanol and dimethyl ether in new composite membranes: A comparison with nafion membranes10.1016/j.memsci.2006.11.036 ↗
59. Durable sulfonated poly(arylene sulfide sulfone nitrile)s containing naphthalene units for direct methanol fuel cells (DMFCS)10.1021/ma400154t ↗
60. Direct methanol alkaline fuel cell with catalysed metal mesh anodes10.1016/j.elecom.2004.02.002 ↗
61. Cell performance modeling of direct methanol fuel cells using proton-exchange solid electrolytes: effective reactant diffusion coefficients in porous diffusion layers10.1016/j.jpowsour.2012.11.029 ↗
62. High-performance direct methanol alkaline fuel cells using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes10.1016/j.jpowsour.2011.10.091 ↗
63. Novel polyvinyl alcohol nanocomposites containing carbon nano-tubes with Fe3O4 pendants for alkaline fuel cell application10.1016/j.memsci.2013.05.001 ↗
64. Water vapor exchange system using a hydrophilic micro porous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells without cathode humidification10.1016/j.jpowsour.2012.04.067 ↗
65. Thermally stable polybenzimidazole/carbon nano-tube composites for alkaline direct methanol fuel cell applications10.1016/j.jpowsour.2013.05.171 ↗
66. Anion and osmolal gaps in the diagnosis of methanol poisoning: clinical study in 28 patients10.1007/s00134-004-2373-7 ↗