Investigation of lead dendrite growth in the formation of valve-regulated lead-acid batteries for electric bicycle applications
Source abstract
Abstract
Abstract The battery temperature, H 2 SO 4 distribution, Pb 2+ ion concentration and composition of the plates during the plate soaking of the 12 V 12 Ah valve-regulated lead-acid (VRLA) battery are studied. A simulated cell composed by two pure Pb plates and the absorptive glass mat (AGM) separator is used to investigate the growth of the lead dendrite in the separator, which is verified by analyzing the faulty batteries after the formation and the failure batteries after the usage. It is found that the H 2 SO 4 is exhausted very quickly after filling and the separator near the plates can become neutral during soaking. Low acidity, high temperature and small PbSO4 particle size will increase the Pb 2+ ion concentration. Higher Pb 2+ ion concentration makes more PbSO 4 tend to deposit on the coarse glass fibers, develop along them and even enwrap the entire fiber. And the fine PbSO 4 crystals are continually transformed into large PbSO 4 crystals via dissolution-deposition. In the subsequent charge, these PbSO 4 crystals will be reduced to the club-shaped lead dendrites and may lead to short circuit of the battery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Gelled electrolytes for use in absorptive glass mat valve-regulated lead-acid (AGM VRLA) batteries working under 100% depth of discharge conditions10.1016/j.jpowsour.2011.05.080 ↗
2. Bi-directional electric vehicle fast charging station with novel reactive power compensation for voltage regulation10.1016/j.ijepes.2014.07.025 ↗
3. Energy consumption and emission of pollutants from electric bicycles
4. Passive equalization and the expiration of battery packs on Chinese electric bicycles
5. Variable current discharge characteristics and SOC estimation of EV/HV battery
6. Formation of lead-acid batteries and structure of positive and negative active masses
7. Zone processes at the formation of the lead acid battery positive plate10.1149/1.2129355 ↗
8. Anodic oxidation of the basic sulfates of lead10.1149/1.2423844 ↗
9. Processes in positive lead/acid battery plates during soaking prior to formation10.1016/0378-7753(93)90030-5 ↗
10. Pavlov · 2011 · 409
11. Processes taking place in the paste of lead-acid battery plates during soaking prior to formation and their influence on battery performance10.1016/j.jpowsour.2004.08.006 ↗
12. Mechanism of the processes of formation of lead-acid battery positive plates10.1149/1.2404142 ↗
13. Investigation on soaking and formation of lead/acid battery plates with different mass structure10.1016/S0378-7753(99)00390-0 ↗
14. Lead/acid battery technology10.1016/0378-7753(96)02323-3 ↗
15. Techniques for jar formation of valve-regulated lead–acid batteries10.1016/S0378-7753(02)00706-1 ↗
16. Willis J., Lead-acid Battery Electrolyte Fluid Solution Additive, U.S. Patent 5945236 (Aug. 31, 1999).
17. Sodium sulfate effects on the electrochemical behaviors of nanostructured lead dioxide and commercial positive plates of lead-acid batteries10.1016/S1452-3981(23)15343-0 ↗
18. Effect of mixed additives on lead–acid battery electrolyte10.1016/S0378-7753(02)00552-9 ↗
19. Battery additives: any influence on separator behavior?10.1016/S0378-7753(00)00622-4 ↗
20. Mao G.W, Sabatino A., Lead-acid Storage Battery Capable of Activation by the Addition of Electrolyte, U.S. Patent 3,948,680 (Apr. 6, 1976).