Optimizing the homogeneity and efficiency of a solid oxide electrolysis cell based on multiphysics simulation and data-driven surrogate model
Source abstract
Abstract
Inhomogeneous current and temperature distributions are harmful to the durability of solid oxide electrolysis cells (SOECs). A high steam utilization is favorable for system efficiency, but also enhances the inhomogeneity. This study combines segmented SOEC experiments, multiphysics simulation, and neural network to optimize the inhomogeneity and efficiency jointly. A three-dimensional (3D) cell model is built and experimental validation shows that the model correctly predicts the decreased down-stream current after the steam utilization exceeds 0.8. Fast surrogate models are trained with the simulation data and integrated into a multi-objective optimization problem for numerical solution. Its solutions form a Pareto front quantifying the conflicting relationship between the steam utilization, inhomogeneity, voltage, hydrogen production and working temperature, from which optimal solutions are chosen to achieve a trade-off. Under a power density of 1.11 W cm −2, the ratio between the down-stream and up-stream currents drops from 63.1% to 55.2% when the steam utilization increases from 0.72 to 0.82. The Pareto fronts can enhance the collaboration between stack manufacturers and system operators by enabling the latter to optimize the operating point for a balance between system efficiency and inhomogeneity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Thermal Expansion and Ionic Conductivity · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. A comprehensive review on high-temperature fuel cells with carbon capture10.1016/j.apenergy.2020.115342 ↗
2. Reversible solid-oxide cell stack based power-to-x-to-power systems: Comparison of thermodynamic performance10.1016/j.apenergy.2020.115330 ↗
3. Bypassing renewable variability with a reversible solid oxide cell plant10.1016/j.apenergy.2018.02.115 ↗
4. Heat up impact on thermal stresses in SOFC for mobile APU applications: Thermo-structural analysis
5. Enabling thermal-neutral electrolysis for CO2-to-fuel conversions with a hybrid deep learning strategy10.1016/j.enconman.2021.113827 ↗
6. Reduced-order transient thermal modeling for SOFC heating and cooling10.1016/j.jpowsour.2005.11.072 ↗
7. Progress in macro scale mechanical effects investigation of solid oxide fuel cells
8. 3D CFD/FEM analysis of thermomechanical long-term behaviour in SOFCs: Furnace operation with different fuel gases10.1016/j.ijhydene.2015.07.018 ↗
9. Spatially resolved electrochemical performance in a segmented planar SOFC10.1149/1.3142737 ↗
10. Investigation of temperature distribution and performance of SOFC short stack with/without machined gas channels10.1016/j.ijhydene.2016.02.045 ↗
11. Experimental investigation of temperature distribution over a planar solid oxide fuel cell10.1016/j.apenergy.2012.12.062 ↗
12. Spatially resolved electrochemical performance and temperature distribution of a segmented solid oxide fuel cell under various hydrogen dilution ratios and electrical loadings10.1016/j.jpowsour.2022.231477 ↗
13. Parameters and their impacts on the temperature distribution and thermal gradient of solid oxide fuel cell10.1016/j.apenergy.2019.03.034 ↗
14. Measurement of transient temperature distribution behavior of a planar solid oxide fuel cell: Effect of instantaneous switching of power generation and direct internal reforming10.1016/j.jpowsour.2020.229070 ↗
15. Experimental investigation of temperature distribution of planar solid oxide fuel cell: Effects of gas flow, power generation, and direct internal reforming10.1016/j.ijhydene.2020.06.033 ↗
16. Direct, in situ optical studies of Ni-YSZ anodes in solid oxide fuel cells operating with methanol and methane10.1021/jp109292r ↗
17. High spatial resolution temperature profile measurements of solid-oxide fuel cells10.1016/j.apenergy.2021.116633 ↗
18. Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell10.1016/j.jpowsour.2009.12.016 ↗
19. Study of relative humidity on durability of the reversal tolerant proton exchange membrane fuel cell anode using a segmented cell10.1016/j.jpowsour.2019.227542 ↗
20. Investigation of local electrochemical performance and local degradation in an operating solid oxide fuel cell
21. In-situ diagnosis and assessment of longitudinal current variation by electrode-segmentation method in anode-supported microtubular solid oxide fuel cells10.1016/j.jpowsour.2014.12.156 ↗
22. Current and temperature distributions in-situ acquired by electrode-segmentation along a microtubular solid oxide fuel cell operating with syngas10.1016/j.jpowsour.2015.06.024 ↗
23. Experimental investigation of in-plane performance variation on anode supported solid oxide fuel cells using segmented cathodes and reference electrodes10.1002/fuce.201900214 ↗
24. Reliability of the numerical SOFC models for estimating the spatial current and temperature variations10.1016/j.ijhydene.2016.06.194 ↗
25. Spatial distribution of electrochemical performance in a segmented SOFC: A combined modeling and experimental study10.1002/fuce.200900083 ↗
26. Mass transport limitation in inlet periphery of fuel cells: Studied on a planar solid oxide fuel cell10.1016/j.ijhydene.2018.07.030 ↗
27. A multiscale model validated on local current measurements for understanding the solid oxide cells performances10.1016/j.jpowsour.2022.232499 ↗
28. Artificial neural network simulator for SOFC performance prediction10.1016/S0378-7753(02)00314-2 ↗
29. Nonlinear modeling of a SOFC stack based on a least squares support vector machine10.1016/j.jpowsour.2006.07.031 ↗
30. Modeling electrical behavior of solid oxide electrolyzer cells by using artificial neural network10.1016/j.ijhydene.2015.04.042 ↗
31. Modelling the SOFC behaviours by artificial neural network10.1016/j.ijhydene.2009.04.068 ↗
32. A robust surrogate model of a solid oxide cell based on an adaptive polynomial approximation method10.1016/j.ijhydene.2020.09.116 ↗
33. Optimal control strategies for hydrogen production when coupling solid oxide electrolysers with intermittent renewable energies10.1016/j.jpowsour.2014.06.028 ↗
34. Optimization of hydrogen yield of a high-temperature electrolysis system with coordinated temperature and feed factors at various loading conditions: A model-based study10.1016/j.apenergy.2018.09.020 ↗
35. Performance analysis of a reversible solid oxide cell system based on multi-scale hierarchical solid oxide cell modelling10.1016/j.enconman.2019.05.099 ↗
36. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 co-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
37. Analysis of a biogas-fed SOFC CHP system based on multi-scale hierarchical modeling10.1016/j.renene.2020.08.091 ↗
38. Optimizing solid oxide fuel cell performance to re-evaluate its role in the mobility sector10.1021/acsenvironau.1c00014 ↗
39. Towards online optimisation of solid oxide fuel cell performance: Combining deep learning with multi-physics simulation10.1016/j.egyai.2020.100003 ↗
40. Modeling of solid oxide fuel cell (SOFC) electrodes from fabrication to operation: Microstructure optimization via artificial neural networks and multi-objective genetic algorithms10.1016/j.enconman.2019.111916 ↗
41. Multi-objective optimizations of solid oxide co-electrolysis with intermittent renewable power supply via multi-physics simulation and deep learning strategy10.1016/j.enconman.2022.115560 ↗
42. Benchmarking solid oxide electrolysis cell-stacks for industrial power-to-methane systems via hierarchical multi-scale modelling10.1016/j.apenergy.2022.119143 ↗
43. Advanced test method of solid oxide cells in a plug-flow setup10.1149/1.3116247 ↗
44. Variance based sensitivity analysis of model output. Design and estimator for the total sensitivity index10.1016/j.cpc.2009.09.018 ↗
45. Multi-objective design and operation of solid oxide fuel cell (SOFC) triple combined-cycle power generation systems: Integrating energy efficiency and operational safety10.1016/j.apenergy.2016.11.010 ↗
46. 4E analysis of efficient waste heat recovery from SOFC using APC: An effort to reach maximum efficiency and minimum emission through an application of grey wolf optimization10.1016/j.ijhydene.2021.04.187 ↗
47. Multi-objective optimization and algorithm improvement on thermal coupling of SOFC-GT-ORC integrated system10.1016/j.compchemeng.2022.107903 ↗
48. Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization10.1016/j.enconman.2021.114245 ↗
49. Long-term behavior of a solid oxide electrolyzer (SOEC) stack10.1002/fuce.201900245 ↗
50. Hauch · 2007
51. Electrochemical quality assurance of solid oxide electrolyser (SOEC) stacks10.1149/2.0041915jes ↗
52. Experimental investigation of segmented SOECs: Locally-resolved impedance and degradation characteristics
53. Chapter 3 - mass transfer in distillation
54. Parametric study of kw-class solid oxide fuel cell stacks fueled by hydrogen and methane with fully multiphysical coupling model10.1016/j.ijhydene.2020.12.092 ↗
55. New method for prediction of binary gas-phase diffusion coefficients10.1021/ie50677a007 ↗
56. NIST · 1998