journal article·2022-02

Knitting a sweater with UV-induced in situ polymerization of poly(pyrrole-co-citral nitrile) on Ni-rich layer oxide cathode materials for lithium ion batteries

Kaiji Lin, Shaodian Yang, Zhicong Shi, Qinglu Fan, Zhiling Liu, Liying Liu

Publisher page

Abstract

Abstract Ni-rich layered oxide (LiNi0.8Co0.1Mn0.1O2) has become popular commercial cathode material for lithium ion batteries, due to its high working potential and high specific capacity. It is still a challenge, however, to maintain the structure and performance under extreme conditions, such as at high charging cutoff (≥4.5 V), high temperature (≥60 °C) and higher charge-discharge rate (≥3 C). Herein, Poly (pyrrole-co-citral nitrile) (PPC) optimized interfacial layer is designed and constructed on the surface of LiNi0.8Co0.1Mn0.1O2 by an in situ photopolymerization self-assembly technology. The sweater-like co-polymer coating provides an integral protection from side reaction, particle rupture and irreversible phase transition during cycling under the extreme conditions. Furthermore, the delocalized π bonds and cross-linked network structure of the co-polymer coating ensure the efficient and stable interface between electrolyte and electrode. This work offers a novel and useful strategy to enhance the electrochemical performance of Ni-rich cathode materials for high-energy lithium ion batteries at extreme conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
2. Chemical, structural, and electronic aspects of formation and degradation behavior on different length scales of Ni-rich Ncm and Li-rich He-Ncm cathode materials in Li-ion batteries10.1002/adma.201900985 ↗
3. Direct observation of defect-aided structural evolution in a nickel-rich layered cathode10.1002/anie.202008144 ↗
4. Recent progress and perspective of advanced high-energy Co-less Ni-rich cathodes for Li-ion batteries: yesterday, today, and tomorrow10.1002/aenm.202002027 ↗
5. Functional passivation interface of LiNi0.8Co0.1Mn0.1O2 toward superior lithium storage
6. Feasibility of cathode surface coating technology for high-energy lithium-ion and beyond-lithium-ion batteries10.1002/adma.201605807 ↗
7. Challenges and strategies to advance high-energy nickel-rich layered lithium transition metal oxide cathodes for harsh operation
8. Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries10.1007/s10008-020-04818-5 ↗
9. Review—knowledge-based process design for high quality production of Ncm811 cathodes
10. Capacity fading of Ni-rich Li[NixCoyMn1–X–Y]O2 (0.6 ≤ X ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗
11. Microstructural degradation of Ni-rich Li[NixCoyMn1-X-Y]O2 cathodes during accelerated calendar aging
12. Unraveling the intricacies of residual lithium in high-Ni cathodes for lithium-ion batteries10.1021/acsenergylett.1c00086 ↗
13. A materials perspective on Li-ion batteries at extreme temperatures10.1038/nenergy.2017.108 ↗
14. Du, Y.; Fujita, K.; Shironita, S.; Sone, Y.; Hosono, E.; Asakura, D.; Umeda, M., Capacity fade characteristics of nickel-based lithium-ion secondary battery after calendar deterioration at 80 °C. J. Power Sources 2021, 501.10.1016/j.jpowsour.2021.230005 ↗
15. A comparative study of structural changes during long-term cycling of Ncm-811 at ambient and elevated temperatures
16. Fundamentals and challenges of lithium ion batteries at temperatures between −40 and 60 °C
17. Long-term cyclability of NCM-811 at high voltages in lithium-ion batteries: an in-depth diagnostic study10.1021/acs.chemmater.0c02398 ↗
18. High‐voltage‐driven surface structuring and electrochemical stabilization of Ni‐rich layered cathode materials for Li rechargeable batteries10.1002/aenm.202000521 ↗
19. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases10.1002/aenm.201800297 ↗
20. Understanding the limitations of lithium ion batteries at high rates
21. Highly densified Ncm-cathodes for high energy Li-ion batteries: microstructural evolution during densification and its influence on the performance of the electrodes10.1016/j.est.2018.03.002 ↗
22. Effects of fast charging at low temperature on a high energy Li-ion battery
23. Lithium-ion battery fast charging: a review
24. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes10.1021/acsenergylett.0c00191 ↗
25. An overview of modification strategies to improve LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode performance for automotive lithium-ion batteries10.1016/j.etran.2021.100105 ↗
26. From surface ZrO2 coating to bulk Zr doping by high temperature annealing of nickel-rich lithiated oxides and their enhanced electrochemical performance in lithium ion batteries10.1002/aenm.201701682 ↗
27. Enhanced electrochemical performance of LiNi1/3Co1/3Mn1/3O2 cathode material by Al2O3 surface coating derived via Nh2-mil-53(Al) mof
28. Precise Al2O3 coating on LiNi0.5Co0.2Mn0.3O2 by atomic layer deposition restrains the shuttle effect of transition metals in Li-ion capacitors
29. Selective TiO2 nanolayer coating by polydopamine modification for highly stable Ni-rich layered oxides10.1002/cssc.201902998 ↗
30. Constructing effective TiO2 nano-coating for high-voltage Ni-rich cathode materials for lithium ion batteries by precise kinetic control
31. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
32. Superior stability secured by a four-phase cathode electrolyte interface on a Ni-rich cathode for lithium ion batteries10.1021/acsami.9b12578 ↗
33. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
34. Enhancing high-voltage performance of LiNi0.8Co0.1Mn0.1O2 by coating with nasicon fast ionic conductor Li1.5Al0.5Zr1.5(PO4)3
35. MnPO4-Coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics
36. Manganese phosphate coated Li[Ni0.6Co0.2Mn0.2]O2 cathode material: towards superior cycling stability at elevated temperature and high voltage10.1016/j.jpowsour.2018.09.049 ↗
37. Conductive cyclized polyacrylonitrile coated LiNi0.6Co0.2Mn0.2O2 cathode with the enhanced electrochemical performance for Li-ion batteries
38. Enhancing the electrochemical performance of Ni-rich layered oxide cathodes by combination of the gradient doping and dual-conductive layers coating10.1021/acsaem.8b02112 ↗
39. Polyvinylpyrrolidone-induced uniform surface-conductive polymer coating endows Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced cyclability for lithium-ion batteries10.1021/acsami.9b04050 ↗
40. Unveiling the impact of the polypyrrole coating layer thickness on the electrochemical performances of LiNi0.5Co0.2Mn0.3O2 in Li–ion battery10.1002/slct.201901112 ↗
41. Surface modification of LiNi0.8Co0.1Mn0.1O2 with conducting polypyrrole10.1007/s10008-014-2519-7 ↗
42. Ameliorating the interfacial problems of cathode and solid-state electrolytes by interface modification of functional polymers10.1002/aenm.201801528 ↗
43. One-Step sol–gel preparation of pdms–silica ormosils as environment-resistant and crack-free thick antireflective coatings
44. Inorganic UV absorbers for the photostabilisation of wood-clearcoating systems: comparison with organic UV absorbers10.1016/j.apsusc.2006.08.029 ↗
45. Study of polypyrrole aging by xps, ftir and conductivity measurements10.1016/j.polymdegradstab.2015.07.021 ↗
46. Enzymatic synthesis and characterization of an water-soluble conducting poly (1,4-diaminobenzene-acrylic acid)10.4028/www.scientific.net/AMR.148-149.118 ↗
47. Fabrication and characterization of polyaniline on cotton fabric via two-step in-situ polymerization
48. Identification of American ginseng from different regions using FT-IR and two-dimensional correlation Ir spectroscopy10.1016/j.vibspec.2003.12.009 ↗
49. Xps study of pulsed laser depositedcnxfilms10.1103/PhysRevB.64.235416 ↗
50. Mohammadkhani · Chem. Eng. J. · 2020 · 382
51. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries10.1039/C7TA11346C ↗
52. In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes10.1038/s41467-021-25611-6 ↗
53. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries