journal article·2021-04

Performance reliability analysis and optimization of lithium-ion battery packs based on multiphysics simulation and response surface methodology

Quan Xia, Zili Wang, Yi Ren, Dezhen Yang, Bo Sun, Qiang Feng, Cheng Qian

Publisher page

Abstract

Abstract Reliability optimization has always been an important topic in the application of lithium-ion batteries in electric vehicles. To optimize the redundancy and layout design of battery packs accurately and efficiently, a novel reliability optimization method based on a multiphysics coupling simulation and a response surface methodology is proposed. An electrochemical-thermal-fluid dynamics model, a temperature-dependent stochastic degradation model and a multistate performance reliability model are developed. A response surface method with the Box-Behnken design method is applied to reduce the number of simulation trials. Then, the redundancy scheme and two layouts of a battery pack are optimized, followed by a sensitivity analysis of the design parameters. The results show that a large spacing in the direction of air flow contributes to improving system reliability. In this case, for the layout of a cross arrangement with equal spacing, the optimal reliability design scheme of a 5 × 5 parallel series with optimal design parameters can improve the cycle life from approximately 1989 to 2933 when taking 90% system reliability as the criterion. The collaborative optimization of redundancy and layout is of great importance to extend the service life and improve the system reliability of battery packs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Electric Vehicles and Infrastructure

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Dimercaptan-polyaniline composite electrodes for lithium batteries with high energy density10.1038/373598a0 ↗
2. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
3. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
4. A reliability design method for a lithium-ion battery pack considering the thermal disequilibrium in electric vehicles10.1016/j.jpowsour.2018.03.036 ↗
5. The method of estimating dependability of supply chain elements on the base of technical and organizational redundancy of process10.17531/ein.2017.3.9 ↗
6. Reliability block diagram analysis10.1016/0026-2714(74)90209-1 ↗
7. Rausand · 2004
8. Fault tree analysis, methods, and applications-a review10.1109/TR.1985.5222114 ↗
10. Pukite · 1998
11. Dynamic reliability analysis of a multi-state manufacturing system10.17531/ein.2019.3.11 ↗
12. Reliability analysis of primary battery packs based on the universal generating function method
13. Reliability evaluation of small stand-alone wind energy conversion systems using a time series simulation model10.1049/ip-gtd:20030068 ↗
14. Exploiting PHEV to augment power system reliability
15. Optimal design of community battery energy storage systems with prosumers owning electric vehicles
16. Multi-objective optimal design of lithium-ion battery packs based on evolutionary algorithms10.1016/j.jpowsour.2014.05.088 ↗
17. A novel design including cooling media for Lithium-ion batteries pack used in hybrid and electric vehicles10.1016/j.jpowsour.2013.06.160 ↗
18. Agent-based restoration approach for reliability with load balancing on smart grids10.1016/j.apenergy.2019.04.119 ↗
19. A reliability-based design concept for lithium-ion battery pack in electric vehicles10.1016/j.ress.2014.10.010 ↗
20. Reliability model of the thermal battery
21. Fault tree safety analysis of a large Li/SOCl2, spacecraft battery10.1016/0378-7753(87)80055-1 ↗
22. Levy · 1989
23. The Fault tree analysis of the lead acid battery's degradation
24. Decision making model for lifecycle assessment of lithium-ion battery for electric vehicle - a case study for smart electric bus project in Korea10.1016/j.jpowsour.2013.10.078 ↗
25. A comparison of grid-connected battery energy storage system designs
26. Reliability evaluation of distribution systems with mobile energy storage systems10.1049/iet-rpg.2015.0608 ↗
27. Reliability evaluation of the solar power system based on the Markov chain method
28. Analysis of real-time estimation method based on hidden Markov models for battery system states of health10.6113/JPE.2016.16.1.217 ↗
29. Evaluation of lithium batteries based on continuous hidden Markov model10.1109/QRS-C.2017.43 ↗
30. Reliability analysis of primary battery packs based on the universal generating function method
31. Multicell state estimation using variation based sequential Monte Carlo filter for automotive battery packs10.1016/j.jpowsour.2014.12.010 ↗
32. Metamodel for efficient estimation of capacity-fade uncertainty in Li-Ion batteries for electric vehicles10.3390/en8065538 ↗
33. Stochastic energy storage capacity model of EV parking lots10.1049/iet-gtd.2016.1406 ↗
34. Optimization design on heat dissipation of lithium-ion battery pack in electric vehicle
35. Multi-objective optimization of lithium-ion battery model using genetic algorithm approach10.1016/j.jpowsour.2014.07.110 ↗
36. Electrochemical-thermal modelling and optimisation of lithium-ion battery design parameters using analysis of variance10.3390/en10091278 ↗
37. LIONSIMBA: a matlab framework based on a finite volume model suitable for Li-ion battery design, simulation, and control10.1149/2.0291607jes ↗
38. Field synergy analysis and optimization of the thermal behavior of lithium ion battery packs10.3390/en10010081 ↗
39. A support approach for the modular design of Li-ion batteries: a test case with PCM10.1016/j.est.2020.101684 ↗
40. Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application10.1016/j.est.2020.102003 ↗
41. A Geraci A new BMS architecture based on cell redundancy10.1109/TIE.2010.2095398 ↗
42. Multiphysical modeling for life analysis of lithium-ion battery pack in electric vehicles10.1016/j.rser.2020.109993 ↗
43. Size optimization of a PV/wind hybrid energy conversion system with battery storage using response surface methodology10.1016/j.apenergy.2008.02.016 ↗
44. Compact liquid cooling strategy with phase change materials for Li-ion batteries optimized using response surface methodology10.1016/j.apenergy.2018.06.143 ↗
45. Shui · 2018
46. Newman · 1991
47. Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
48. A modified reliability model for lithium-ion battery packs based on the stochastic capacity degradation and dynamic response impedance10.1016/j.jpowsour.2019.03.042 ↗
49. Battery cycle life prediction with coupled chemical degradation and fatigue mechanics10.1149/2.049210jes ↗
50. Degradation of lithium ion batteries employing graphite negatives and nickel-cobalt-manganese oxide+spinel manganese oxide positives: Part 2, chemical-mechanical degradation model10.1016/j.jpowsour.2014.07.028 ↗
51. The influence of surface inhomogeneity on the overcharge and lithium plating of graphite electrodes10.1088/2515-7655/ab4dc1 ↗
52. Influence of polymeric binders on mechanical properties and microstructure evolution of silicon composite electrodes during electrochemical cycling10.1016/j.jpowsour.2019.04.006 ↗
53. Cycle life analysis of series connected lithium-ion batteries with temperature difference10.1016/j.jpowsour.2014.04.034 ↗
54. Internal resistance matching for parallel-connected lithium-ion cells and impacts on battery pack cycle life10.1016/j.jpowsour.2013.11.101 ↗
55. Modeling lithium Ion battery degradation in electric vehicles
56. Lithium-ion batteries life estimation for plug-in hybrid electric vehicles
57. Electro-thermal cycle life model for lithium iron phosphate battery10.1016/j.jpowsour.2012.06.055 ↗
58. Modeling of a commercial graphite/LiFePO4 cell10.1149/1.3567007 ↗
59. Transport properties of LiPF6-based Li-ion battery electrolytes10.1149/1.1872737 ↗