journal article·2020-11

Performance degradation of 1 kW proton exchange membrane fuel cell stack using graphitized carbon supported Pt nanoparticle catalyst

Fengwen Pan, Jun Li, Ying Gao, Bing Li

Publisher page

Abstract

Abstract Graphitic carbon-supported Pt nanoparticles (Pt/GC) are used as high durability catalysts in 1 kW proton exchange membrane fuel cell (PEMFC) stack. Accelerated degradation tests (ADT) with different protocols at the half-cell and single cell level show that Pt/GC catalysts exhibited better durability than commercial Pt/C. After 458 h of dynamic drive cycle durability testing, the PEMFC stack exhibits a voltage degradation rate at 1000 mA cm−2 of 5.3% and 85 μV/h. The results show that the majority of degradation was due to the contact angles of the hydrophilicity of the catalyst layer (CL) and the substrate layer (SL) is enhanced, which means the decrease in PEMFC stack durability also comes from the increase in mass transfer resistance and the reduction in the water management capacity of the cell. Partly, another reason is the collapse of the CL, which comes from the uneven assembly force and the structural change of CL. However, the structure and the size of the Pt/GC catalyst and electrochemically active surface area (ECSA) of CL is found hardly changed after 458 h, which indicates excellent stability of the catalyst and MEA under these practical conditions. Herein, this further supports that Pt/GC catalyst makes practical PEMFC applications possible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
2. Separator-free fuel cell stacks operating in a mixture of hydrogen and air10.1039/c0ee00288g ↗
3. Partial flooding and its effect on the performance of a proton exchange membrane fuel cell10.1016/j.enconman.2020.112537 ↗
4. An overview of fuel cell technology: fundamentals and applications10.1016/j.rser.2014.01.012 ↗
5. Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field10.1016/j.applthermaleng.2019.114464 ↗
6. Pt nanoparticles loaded on W18O49 nanocables-rGO nanocomposite as a highly active and durable catalyst for methanol electro-oxidation10.1021/acsomega.8b02942 ↗
7. A superior oxygen reduction reaction electrocatalyst based on reduced graphene oxide and iron(II) phthalocyanine-supported sub-2 nm platinum nanoparticles10.1021/acsanm.7b00173 ↗
8. Ultralow Pt loading on CVD graphene for acid electrolytes and PEM fuel cells10.1016/j.ijhydene.2018.06.020 ↗
9. Microwave assisted, facile synthesis of Pt/CNT catalyst for proton exchange membrane fuel cell application10.1016/j.ijhydene.2017.02.109 ↗
10. Microwave assisted poly (3,4-ethylenedioxythiophene)-reduced graphene oxide nanocomposite supported Pt as durable electrocatalysts for polymer electrolyte fuel cells
11. Effect of operating conditions on carbon corrosion in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2009.04.006 ↗
12. Durability of Pt3Co/C cathodes in a 16 cell PEMFC stack: macro/microstructural changes and degradation mechanisms10.1149/1.3485104 ↗
13. Nitrogen-doped carbon nanofiber catalyst for ORR in PEM fuel cell stack: performance, durability and market application aspects10.1016/j.ijhydene.2016.07.137 ↗
14. Recent progress on the key materials and components for proton exchange membrane fuel cells in vehicle applications10.3390/en9080603 ↗
15. The durability of carbon supported Pt nanowire as novel cathode catalyst for a 1.5 kW PEMFC stack10.1016/j.apcatb.2014.06.040 ↗
16. A highly active, stable and synergistic Pt nanoparticles/Mo2C nanotube catalyst for methanol electro-oxidation10.1038/am.2014.122 ↗
17. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
18. Electrocatalytic corrosion of carbon support in PEMFC cathodes10.1149/1.1630412 ↗
19. Electrochemical characterization of binary carbon supported electrode in polymer electrolyte fuel cells10.1016/S0378-7753(00)00625-X ↗
20. Model of carbon corrosion in PEM fuel cells10.1149/1.2203811 ↗
21. Electrochemical behavior of Pt–Ru catalysts supported on graphitized ordered mesoporous carbons toward CO and methanol oxidation10.3390/surfaces2010001 ↗
22. Durability of Pt catalysts supported on graphitized carbon-black during gas-exchange start-up operation similar to that used for fuel cell vehicles10.1149/2.0771607jes ↗
23. Evaluation of change in nanostructure through the heat treatment of carbon materials and their durability for the start/stop operation of polymer electrolyte fuel cells10.1016/j.electacta.2013.02.062 ↗
24. The durability investigation of a 10‐cell metal bipolar plate proton exchange membrane fuel cell stack10.1002/er.4283 ↗
25. Preparation of a graphitized-carbon-supported PtNi octahedral catalyst and application in a proton-exchange membrane fuel cell10.1021/acsami.9b17248 ↗
26. A highly durable platinum nanocatalyst for proton exchange membrane fuel cells: multiarmed starlike nanowire single crystal10.1002/anie.201004631 ↗
27. Diagnosis of membrane electrode assembly degradation with drive cycle test technique10.1016/j.ijhydene.2014.02.161 ↗
28. Effects of flow field design on water management and reactant distribution in PEMFC: a review10.1007/s11581-016-1644-y ↗