Towards 3D knitted-fabric derived supercapacitors with full structural and functional integrity of fiber and electroactive materials
Source abstract
Abstract
Abstract Truly knitted textiles based supercapacitors (SCs) are receiving great attention owing to their inherent flexibility and electrochemical performance. Here, the one-pot knitted conductive 3D spacer fabric (3DSF) was, for the first time, used as the frame supporting the highly pseudocapacitive materials. MnO2 and the electrochemically reduced graphene oxide (ErGO) are grown on the top and bottom layer of the 3DSF respectively, realizing a 3D all-textile asymmetric SC (3DAS) with a functional and structural integrity. Both water-proof and wear-resistant properties are readily rendered after encapsulating with the flexible multifunctional polyurethane (PU) film. A high specific capacitance of 1.02 F cm−2 (36.59 F g−1) is achieved at the current density of 7.5 mA cm−2 (0.275 A g−1), and the maximum areal energy density is nearly 1.02 mWh·cm−2 at a power density of 5.27 mW cm−2. The approach of coupling the advanced computerized technology with the chemical synthesis opens new avenues for the development of the truly flexible and wearable energy storage devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Scalable synthesis of a new class of polymer microrods by a liquid-liquid dispersion technique10.1002/adma.200400112 ↗
2. Structural characteristics of low torque and ring spun yarns10.1177/0040517510387213 ↗
3. Novel highly sensitive and wearable pressure sensors from conductive three-dimensional fabric structures10.1088/0964-1726/24/12/125022 ↗
4. All-carbon cord-yarn supercapacitor10.1177/1528083717699370 ↗
5. Design of novel wearable, stretchable, and waterproof cable-type supercapacitors based on high-performance nickel cobalt sulfide-coated etching-annealed yarn electrodes10.1002/smll.201704373 ↗
6. Novel high-performance asymmetric supercapacitors based on nickel-cobalt composite and PPy for flexible and wearable energy storage10.1016/j.jpowsour.2018.09.030 ↗
7. Graphene-based in-planar supercapacitors by a novel laser-scribing, in-situ reduction and transfer-printed method on flexible substrates10.1016/j.jpowsour.2019.02.096 ↗
8. Design of high-performance wearable energy and sensor electronics from fiber materials10.1021/acsami.8b16167 ↗
9. Anomalous pseudocapacitive behavior of a nanostructured, mixed-valent manganese oxide film for electrical energy storage10.1021/nl300984y ↗
10. 2D mesoporous MnO2 nanosheets for high-energy asymmetric micro-supercapacitors in water-in-salt gel electrolyte10.1016/j.ensm.2018.12.022 ↗
11. Crystalline MnO2 as possible alternatives to amorphous compounds in electrochemical supercapacitors10.1149/1.2352197 ↗
12. 3D patternable supercapacitors from hierarchically architected porous fiber composites for wearable and waterproof energy storage10.1002/smll.201901313 ↗
13. All-carbon solid-state yarn supercapacitors from activated carbon and carbon fibers for smart textiles10.1039/C5MH00108K ↗
14. Polymorphous supercapacitors constructed from flexible three-dimensional carbon network/polyaniline/MnO2 composite textiles10.1021/acsami.7b19195 ↗
15. Facile synthesis of ultrathin NiCo2S4 nano-petals inspired by blooming buds for high-performance supercapacitors10.1039/C7TA01326D ↗
16. Supercapacitors: highly stable transparent conductive silver grid/PEDOT: PSS electrodes for integrated bifunctional flexible electrochromic supercapacitors (adv. Energy mater. 4/201610.1002/aenm.201501882 ↗
17. All-solid-state high-energy planar asymmetric supercapacitors based on all-in-one monolithic film using boron nitride nanosheets as separator10.1016/j.ensm.2017.08.002 ↗
18. Metallic few-layered VSe2 nanosheets: high two-dimensional conductivity for flexible in-plane solid-state supercapacitors10.1039/C8TA00089A ↗
19. Textile-based electrochemical energy storage devices10.1002/aenm.201600783 ↗
20. Intelligent characterization and evaluation of yarn surface appearance using saliency map analysis, wavelet transform and fuzzy ARTMAP neural network10.1016/j.eswa.2011.09.114 ↗
21. Analysis of the relaxation modulus of spun yarns10.1177/0040517509342315 ↗
22. Toward flexible and wearable embroidered supercapacitors from cobalt phosphides-decorated conductive fibers10.1007/s40820-019-0321-x ↗
23. Influences of geometric patterns of 3D spacer fabric on tensile behavior of concrete canvas10.1016/j.conbuildmat.2014.05.041 ↗
24. Towards truly wearable energy harvesters with full structural integrity of fiber materials10.1016/j.nanoen.2019.01.056 ↗
25. High-performance asymmetric supercapacitor based on graphene hydrogel and nanostructured MnO210.1021/am300455d ↗
26. Direct electrochemical synthesis of reduced graphene oxide (rGO)/copper composite films and their electrical/electroactive properties10.1021/am500768g ↗
27. Direct electro-deposition of graphene from aqueous suspensions10.1039/c1cp20173e ↗
28. Research progress in MnO2 -carbon based supercapacitor electrode materials10.1002/smll.201702883 ↗
29. Structural directed growth of ultrathin parallel birnessite on beta-MnO2 for high-performance asymmetric supercapacitors10.1021/acsnano.7b03431 ↗
30. Template electrodeposition and characterization of nanostructured Pb as a negative electrode for lead-acid battery10.1016/j.jpowsour.2018.12.033 ↗
31. A novel non-porous separator based on single-ion conducting triblock copolymer for stable lithium electrodeposition10.1016/j.jpowsour.2019.02.048 ↗
32. One-step electrochemical approach to the synthesis of Graphene/MnO2 nanowall hybrids10.1007/s12274-011-0120-2 ↗
33. Co-electrodeposited rGO/MnO2 nanohybrid for arsenite detection in water by stripping voltammetry10.1016/j.snb.2016.06.124 ↗
34. Highly loaded manganese oxide with high rate capability for capacitive applications10.1016/j.jpowsour.2018.06.026 ↗
35. The dissolution and biological effects of silver nanoparticles in biological media10.1039/c3tb21569e ↗
36. Electrochemical behavior of the dissolution of gold-silver alloys in cyanide solutions10.1007/BF02914898 ↗
37. Flexible asymmetric micro-supercapacitors based on Bi2O3and MnO2Nanoflowers: larger areal mass promises higher energy density10.1002/aenm.201401882 ↗
38. High-performance fiber-shaped all-solid-state asymmetric supercapacitors based on ultrathin MnO2nanosheet/carbon fiber cathodes for wearable electronics10.1002/aenm.201501458 ↗
39. High energy density asymmetric supercapacitors with a nickel oxide nanoflake cathode and a 3D reduced graphene oxide anode10.1039/c3nr02710d ↗
40. Facile Co-electrodeposition method for high-performance supercapacitor based on reduced graphene oxide/polypyrrole composite film10.1021/acsami.7b03786 ↗
41. A high performance stretchable asymmetric fiber-shaped supercapacitor with a core-sheath helical structure10.1002/aenm.201600976 ↗
42. Engineering 3D ion transport channels for flexible MXene films with superior capacitive performance
43. 3D printing quasi‐solid‐state asymmetric micro‐supercapacitors with ultrahigh areal energy density10.1002/aenm.201800408 ↗
44. Multilayer-folded graphene ribbon film with ultrahigh areal capacitance and high rate performance for compressible supercapacitors10.1002/adfm.201800597 ↗