Building nickel-rich cathodes with large concentration gradient for high performance lithium-ion batteries
Source abstract
Abstract
Abstract The construction of Nickel-rich layered oxide cathodes with concentration gradient structure (FCG) is still a tough challenge due to the adverse thermal-induced diffusion of the transition metal ions (TM) during sintering process. Here a series of full concentration gradient Li[Ni0.8Co0.1Mn0.1]O2 (FCG811) cathode materials with TiO2-regulation is constructed and studied. The introduction of TiO2 could effectively block the interdiffusion of TM in FCG811, and thus a large evolution of the composition from the central Li[Ni0.91Co0.06Mn0.03]O2 to the surficial Li[Ni0.55Co0.16Mn0.29]O2 is achieved. The larger gradient enables the FCG cathodes with higher electrochemical stability and smaller internal strain at highly charged state. In addition, the Ti4+ doping is also acquired, which is favorable for the structural durability of the NCM cathodes. As a result, the FCG811 with TiO2 incorporation displays high capacity of 169 mAh g−1, with 96% retention after 150 cycles, which is 18% higher than that of the conventional FCG811. Structural and compositional characterizations (i.e., in-situ XRD, EIS, XPS and HRTEM) further reveal the electrochemical mechanism and kinetics of the designed FCG811-TiO2 cathode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
2. A microporous covalent-organic framework with abundant accessible carbonyl groups for lithium-ion batteries10.1002/anie.201805540 ↗
3. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives10.1002/aenm.201501010 ↗
4. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
5. Towards understanding the rate capability of layered transition metal oxides LiNiyMnyCo1−2yO210.1016/j.jpowsour.2014.05.142 ↗
6. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
7. Surface/Interfacia structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
8. Improved cycling stability of Na-doped cathode materials Li1.2Ni0.2Mn0.6O2 via a facile synthesis10.1021/acssuschemeng.8b02552 ↗
9. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
10. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries10.1039/C7TA11346C ↗
11. A mild surface washing method using protonated polyaniline for Ni-rich LiNi0.8Co0.1Mn0.1O2 material of lithium ion batteries10.1016/j.electacta.2017.07.169 ↗
12. Effect of outer layer thickness on full concentration gradient layered cathode material for lithium-ion batteries10.1016/j.jpowsour.2014.09.161 ↗
13. Comparative study of Ni-rich layered cathodes for rechargeable lithium batteries: Li[Ni0.85Co0.11Al0.04]O2 and Li[Ni0.84Co0.06Mn0.09Al0.01]O2 with two-step full concentration gradients10.1021/acsenergylett.6b00150 ↗
14. Advanced concentration gradient cathode material with two-slope for high-energy and safe lithium batteries10.1002/adfm.201501430 ↗
15. Cathode material with nanorod structure-an application for advanced high-energy and safe lithium batteries10.1021/cm4006772 ↗
16. Improved performances of Li[Ni0.65Co0.08Mn0.27]O2cathode material with full concentration gradient for Li-ion batteries10.1149/2.0101502jes ↗
17. Core–shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries10.1039/C6TA10297B ↗
18. High-capacity concentration gradient Li[Ni0.865Co0.120Al0.015]O2 cathode for lithium-ion batteries10.1002/aenm.201703612 ↗
19. Progress in high-capacity core-shell cathode materials for rechargeable lithium batteries10.1021/jz402691z ↗
20. Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries10.1016/j.nanoen.2018.04.077 ↗
21. Synthesis and electrochemical characteristics of layered LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries10.1016/j.ssi.2005.02.023 ↗
22. Synergic coating and doping effects of Ti-modified integrated layered–spinel Li1.2Mn0.75Ni0.25O2+δ as a high capacity and long lifetime cathode material for Li-ion batteries10.1039/C7TA09118D ↗
23. Electrochemical and physical properties of Ti substituted layered nickel manganese cobalt oxide (NCM) cathode materials10.1149/2.060208jes ↗
24. Computational and experimental investigation of Ti substitution in Li1(NixMnxCo1-2x-yTiy)O2 for lithium ion batteries10.1021/jz5017526 ↗
25. An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating10.1016/j.jpowsour.2014.01.061 ↗
26. Surface modification for suppressing interfacial parasitic reactions of a nickel-rich lithium-ion cathode10.1021/acs.chemmater.8b04200 ↗
27. A high-capacity Li[Ni0.8Co0.06Mn0.14]O2 positive electrode with a dual concentration gradient for next-generation lithium-ion batteries10.1039/C5TA05657H ↗
28. Solid-state redox reactions of LiCoO2 (R3̅m) for 4 volt secondary lithium cells10.1149/1.2059267 ↗
29. Alleviating structural degradation of nickel-rich cathode material by eliminating the surface Fm3̅m phase10.1016/j.ensm.2017.05.008 ↗
30. Cation distribution and chemical deintercalation of Li1-xNi1+xO210.1016/0025-5408(90)90028-Z ↗
31. Correlating structural changes of the improved cyclability upon Nd-substitution in LiNi0.5Co0.2Mn0.3O2 cathode materials10.1016/j.ensm.2018.09.003 ↗
32. Suppressing the structure deterioration of Ni-rich LiNi0.8Co0.1Mn0.1O2 through atom-scale interfacial integration of self-forming hierarchical spinel layer with Ni gradient concentration10.1021/acsami.7b08802 ↗
33. Structural and thermal properties of LiNi0.6−xMgxCo0.25Mn0.15O2 cathode materials10.1016/j.jpowsour.2008.05.058 ↗
34. New findings on the phase transitions in Li1−xNiO2 : in situ synchrotron X-ray diffraction studies10.1016/S1388-2481(99)00046-6 ↗
35. High-performance and industrially feasible Ni-rich layered cathode materials by integrating coherent interphase10.1021/acsami.8b05648 ↗
36. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
37. Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability10.1016/j.nanoen.2019.02.027 ↗
38. Structural stability of LiNiO2 cycled above 4.2 V10.1021/acsenergylett.7b00304 ↗