journal article·2020-07

Correlation of electrochemical and mechanical responses: Differential analysis of rechargeable lithium metal cells

Sangwook Kim, Abhi Raj, Bin Li, Eric J. Dufek, Charles C. Dickerson, Hsiao-Ying Huang, Boryann Liaw, Gorakh M. Pawar

Publisher page

Abstract

Abstract Recently, interest in high energy rechargeable lithium metal batteries has increased. Application of pressure has been identified as a distinct means to increase cycle life for these cells, but there is still a disconnect between the evolution of electrochemical and mechanical responses. For this study, lithium/NMC622 pouch cells are cycled under two different pressure conditions and pressure evolution is monitored. Applying pressure with an appropriate experimental setup not only improves performance, but also enables collection of additional information that compliments cell electrochemistry. By jointly comparing differential pressure (dP dV−1) and differential capacity (dQ dV−1) analysis, the combined electrochemical and mechanical cell responses are analyzed. It is found that while little change in cell capacity and dQ dV−1 are observed, changes in cell pressure can be used to provide in operando information on the lithium metal electrode for full pouch cells. The changes in pressure suggest it is possible to track the evolution of electrode structure from a flatter electrode early in life to a more porous negative electrode prior to the point where cell capacity begins to dramatically fade.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
2. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries10.1038/nenergy.2017.12 ↗
3. Coating/substitution enhances the electrochemical performance of the LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathode10.1021/acsami.9b09696 ↗
4. What limits the capacity of layered oxide cathodes in lithium batteries?10.1021/acsenergylett.9b01236 ↗
5. A model of concurrent lithium dendrite growth, SEI growth, SEI penetration and regrowth10.1149/2.0381709jes ↗
6. Synergistic effect of 3D current collectors and ALD surface modification for high coulombic efficiency lithium metal anodes
7. Lithium metal anodes: toward an improved understanding of coupled morphological, electrochemical, and mechanical behavior10.1021/acsenergylett.6b00650 ↗
8. Impacts of lean electrolyte on cycle life for rechargeable Li metal batteries10.1016/j.jpowsour.2018.10.060 ↗
9. Mechanical stresses at the cathode-electrolyte interface in lithium-ion batteries10.1557/jmr.2016.373 ↗
10. Multiphysics coupling in lithium-ion batteries with reconstructed porous microstructures10.1021/acs.jpcc.7b12388 ↗
11. Mechanical and structural degradation of LiNixMnyCozO2 cathode in Li-ion batteries: an experimental study10.1149/2.1751713jes ↗
12. Characterization of external pressure effects on lithium-ion pouch cell
13. Stress evolution on the phase boundary in LiFePO4 particles10.1149/2.079311jes ↗
14. Chemo-mechanical expansion of lithium electrode materials-on the route to mechanically optimized all-solid-state batteries10.1039/C8EE00907D ↗
15. Oxygen release and its effect on the cycling stability of LiNixMnyCozO2 (NMC) cathode materials for Li-ion batteries10.1149/2.0021707jes ↗
16. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
17. Key issues hindering a practical lithium-metal anode10.1016/j.trechm.2019.02.015 ↗
18. Operando pressure measurements reveal solid electrolyte interphase growth to rank Li-ion cell performance10.1016/j.joule.2018.12.009 ↗
19. Volume, pressure and thickness evolution of Li-ion pouch cells with silicon-composite negative electrodes10.1149/2.1691712jes ↗
20. Study of the failure mechanisms of LiNi0.8Mn0.1Co0.1O2 cathode material for lithium ion batteries10.1149/2.1011507jes ↗
21. Nicholas · 2016
22. Long cycle life and dendrite-free lithium morphology in anode-free lithium pouch cells enabled by a dual-salt liquid electrolyte10.1038/s41560-019-0428-9 ↗
23. State-of-health estimation of LiFePO 4/graphite batteries based on a model using differential capacity10.1016/j.jpowsour.2015.11.070 ↗
24. State of health battery estimator enabling degradation diagnosis: model and algorithm description10.1016/j.jpowsour.2017.05.121 ↗
25. Fast charge implications: pack and cell analysis and comparison10.1016/j.jpowsour.2018.01.091 ↗
26. Tracking degradation in lithium iron phosphate batteries using differential thermal voltammetry10.1016/j.jpowsour.2017.11.011 ↗
27. Degradation mechanism detection for NMC batteries based on Incremental Capacity curves10.3390/wevj8020350 ↗
28. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles10.1038/s41560-019-0390-6 ↗
29. Communication - pressure evolution in constrained rechargeable lithium-metal pouch cells10.1149/1945-7111/ab6439 ↗
30. New insights into mossy Li induced anode degradation and its formation mechanism in Li-S batteries10.1021/acsenergylett.7b00886 ↗
31. Highly stable lithium metal battery with an applied three-dimensional mesh structure interlayer10.1039/C8TA05069D ↗
32. Structural modulation of lithium metal-electrolyte interface with three-dimensional metallic interlayer for high-performance lithium metal batteries
33. Identify capacity fading mechanism in a commercial LiFePO4 cell10.1016/j.jpowsour.2009.05.036 ↗
34. Exploring the impact of mechanical pressure on the performance of anode-free lithium metal cells10.1149/2.0091908jes ↗
35. Thermal relaxation of lithium dendrites10.1039/C4CP05786D ↗
36. A quantitative failure analysis on capacity fade in rechargeable lithium metal cells lithium metal cells