journal article·2020-06

Conductivity, permeability, and stability properties of chemically tailored poly(phenylene oxide) membranes for Li+ conductive non-aqueous redox flow battery separators

Patrick M. McCormack, Hongxi Luo, Geoffrey M. Geise, Gary M. Koenig

Publisher page

Abstract

Abstract Non-aqueous redox flow batteries can operate at a higher voltage and energy density than aqueous systems, but developing these batteries will require new membrane separators engineered specifically for non-aqueous applications. Herein, we report the preparation and characterization of a series of membranes engineered specifically for a non-aqueous redox flow battery by functionalizing a poly(phenylene oxide) (PPO) backbone with increasing amounts of a highly sulfonated side chain, phenoxyaniline trisulfonate (POATS). These POATS-PPO membranes appear to be dimensionally stable over a period of at least four months in the non-aqueous electrolyte, and they exhibit lithium ion conductivities greater than that of previously reported control membranes. Ionic conductivity values, measured in non-aqueous and aqueous electrolytes, reveal solvent-specific ionic conductivity properties that differ from expected scaling relationships based on the ionic conductivity of the bulk electrolyte solution. The permeability of the membranes to ferrocene, a representative redox active molecule, does not change significantly with the degree of functionalization of the membrane. As a result, selectivity increases due to the increase in ionic conductivity as the degree of functionalization increases. Overall, the characterization of flow battery-relevant electrochemical properties suggests that these POATS-PPO membranes are promising materials for non-aqueous flow battery applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Redox flow batteries for the storage of renewable energy: a review10.1016/j.rser.2013.08.001 ↗
2. Advanced redox-flow batteries: a perspective10.1149/2.0101601jes ↗
3. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
4. Nonaqueous redox-flow batteries: organic solvents, supporting electrolytes, and redox pairs10.1039/C5EE02341F ↗
5. Materials and systems for organic redox flow batteries: status and challenges10.1021/acsenergylett.7b00650 ↗
6. Recent progress in redox flow battery research and development10.1002/adfm.201200694 ↗
7. Qi · 2018
8. An all-organic non-aqueous lithium-ion redox flow battery10.1002/aenm.201200322 ↗
9. TEMPO-based catholyte for high-energy density nonaqueous redox flow batteries10.1002/adma.201403746 ↗
10. A highly concentrated catholyte enabled by a low-melting-point ferrocene derivative10.1021/acsenergylett.7b00115 ↗
11. Macromolecular design strategies for preventing active-material crossover in non-aqueous all-organic redox-flow batteries10.1002/anie.201610582 ↗
12. Ferrocene and cobaltocene derivatives for non-aqueous redox flow batteries10.1002/cssc.201403021 ↗
13. Nanoporous aramid nanofibre separators for nonaqueous redox flow batteries10.1038/s41467-018-05752-x ↗
14. Redox active polymers for non-aqueous redox flow Batteries : validation of the size-exclusion approach10.1149/2.1511707jes ↗
15. Relationship between ionic conductivity of perfluorinated ionomeric membranes and nonaqueous solvent properties10.1016/S0376-7388(00)00642-6 ↗
16. An investigation of the ionic conductivity and species crossover of lithiated nafion 117 in nonaqueous electrolytes10.1149/2.03211601jes ↗
17. Through-plane conductivities of membranes for nonaqueous redox flow batteries10.1149/2.0901510jes ↗
18. A carbon-free lithium-ion solid dispersion redox couple with low viscosity for redox flow batteries10.1016/j.jpowsour.2016.05.033 ↗
19. An asymmetric Zn//Ag doped polyaniline microparticle suspension fl ow battery with high discharge capacity10.1016/j.jpowsour.2014.11.012 ↗
20. High – energy density nonaqueous all redox flow lithium battery enabled with a polymeric membrane10.1126/sciadv.1500886 ↗
21. Sulfonated poly(phenylene oxide) membranes as promising materials for new proton exchange membranes10.1002/pat.718 ↗
22. Comb-shaped polymers to enhance hydroxide transport in anion exchange membranes10.1039/c2ee22050d ↗
23. Structural modification of poly(2,6-dimethyl-1,4-phenylene oxide)10.1080/03602559108019203 ↗
24. Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)-A versatile starting polymer for proton conductive membranes (PCMs)10.1016/j.progpolymsci.2008.07.002 ↗
25. An, Preparation of poly(phenylene oxide-g-styrenesulfonic acid) and their characterization for DMFC membrane10.1177/0954008306068118 ↗
26. Crosslinked anion exchange membranes prepared from poly(phenylene oxide) (PPO) for non-aqueous redox flow batteries10.1016/j.jpowsour.2017.12.049 ↗
27. Proton-conducting aromatic polymers carrying hypersulfonated side chains for fuel cell applications10.1002/adfm.200700107 ↗
28. Enabling fast charging of high energy density Li-ion cells with high lithium ion transport electrolytes10.1016/j.elecom.2019.04.013 ↗
29. Lithium bis(fluorosulfonyl)imide (LiFSI) as conducting salt for nonaqueous liquid electrolytes for lithium-ion batteries: physicochemical and electrochemical properties10.1016/j.jpowsour.2010.12.040 ↗
30. Liquid-solid phase diagrams of binary carbonates for lithium batteries10.1149/1.1393419 ↗
31. Transport and electrochemical properties and spectral features of non-aqueous electrolytes containing LiFSI in linear carbonate solvents10.1149/1.3514705 ↗
32. Novel sulfonated polyimides as polyelectrolytes for fuel cell application: 1. Synthesis, proton conductivity, and water stability of polyimides from 4,4′-diaminodiphenyl ether-2,2′-disulfonic acid10.1021/ma020005b ↗
33. Chemours, Nafion NR211 and NR212, (n.d.). https://nafionstore-us.americommerce.com/Shared/P11_C10610_Nafion_NR-211__NR-212_P11.pdf.
34. Dupont, DuPontTM Nafion® PFSA membranes, (n.d.) 0–3. http://www.nafionstore.com/Shared/Bulletins/N115-N117-N1110.pdf.
35. Preparation , optimization and characterization of novel ion exchange membranes by blending of chemically modified PVDF and SPPO10.1016/j.seppur.2012.02.006 ↗
36. Sodium chloride sorption in sulfonated polymers for membrane applications10.1016/j.memsci.2012.08.014 ↗
37. Molecular separation with organic solvent Nanofiltration : a critical review10.1021/cr500006j ↗
38. Effect of bromine and phosphorus substituents on the glass transition properties of some substituted poly(oxy‐1,4‐phenylenes)10.1002/apmc.1982.051040111 ↗
39. Nitration and amination of polyphenylene oxide: synthesis, gas sorption and permeation analysis10.1016/j.eurpolymj.2007.01.017 ↗
40. Fundamental water and salt transport properties of polymeric materials10.1016/j.progpolymsci.2013.07.001 ↗
41. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells
42. Single lithium-ion conducting solid polymer electrolytes: advances and perspectives10.1039/C6CS00491A ↗
43. Single lithium-ion conducting polymer electrolytes based on a super- delocalized polyanion10.1002/anie.201509299 ↗
44. Lithium salt inclusion as a strategy for improving the Li + conductivity of nafion membranes in aprotic systems10.1002/admi.201600660 ↗
45. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
46. Associating polyelectrolytes with perfluoroalkyl side Chains : aggregation in aqueous solution , association with surfactants , and comparison with hydrogenated analogues10.1021/la970003y ↗
47. Transport phenomena through polymeric systems10.1016/S0079-6700(00)00036-8 ↗
48. Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries10.1039/C4EE02158D ↗
49. Recent development of membrane for vanadium redox flow battery applications : a review10.1016/j.apenergy.2018.12.087 ↗