Advanced exergy and graphical exergy analyses for solid oxide fuel cell turbine-less jet engines
Source abstract
Abstract
Abstract Fuel cell technologies are applied to the propulsion systems on aircraft to save fuel and reduce emissions. A novel hybrid engine with low specific fuel consumption by integrating solid oxide fuel cells and turbine engines is proposed in our previous papers. However, the real performance potential of the engine and the interrelation among the components have not illustrated. To demonstrate the irreversibility and show the energy flow paths of the engine, the advanced exergy and thermodynamic performance models are built and the main parts are validated. The conclusions are as follows: (1) The exergy efficiency of the engine is 49.8%. (2) The avoidable endogenous exergy destruction ratio is just 12.9%, which indicates that lots of exergy destruction rates can not be avoided by improving the components. The endogenous exergy destruction ratio is 88.5%, which means that the relationship between the components is not close. (3) Traditional exergy analysis suggests that the first improvement priority should be given to combustors, and then to SOFCs and heat exchangers. However, the order of priorities for improvements as suggested by advanced exergy analysis is different. This revised order should be first the nozzle, then the compressor, the heat exchanger, and the motor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Technological, economic and environmental prospects of all-electric aircraft10.1038/s41560-018-0294-x ↗
2. Alternative fuels and perspectives solid oxide fuel cells usage in air transport10.1149/05701.0149ecst ↗
3. Roth · 2010 · 6537
4. Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: a review10.1016/j.apenergy.2015.06.027 ↗
5. SOFC-APU systems for aircraft: a review10.1016/j.ijhydene.2018.07.004 ↗
6. Performance evaluation of a turbojet engine integrated with interstage turbine burner and solid oxide fuel cell10.1016/j.energy.2018.11.088 ↗
7. Himansu · 2006
8. Stoia · 2016 · 1024
9. Woodham · 2018 · 3362
10. Stoia · 2018 · 3358
11. Papathakis · 2018 · 3359
12. Okai · 2012 · 4238
13. Okai · 2015 · 3888
14. Okai · 2017 · 4957
15. A review on exergy analysis of aerospace power systems10.1016/j.actaastro.2018.09.003 ↗
16. Exergy as a useful tool for the performance assessment of aircraft gas turbine engines: a key review10.1016/j.paerosci.2016.03.001 ↗
17. Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications10.1016/j.energy.2016.09.070 ↗
18. Thermodynamic analysis of the part load performance for a small scale gas turbine jet engine by using exergy analysis method10.1016/j.energy.2016.05.108 ↗
19. The effects of hydrogen fuel usage on the exergetic performance of a turbojet engine10.1016/j.ijhydene.2017.12.178 ↗
20. Thrust performance evaluation of a turbofan engine based on exergetic approach and thrust management in aircraft10.1515/tjj-2015-0065 ↗
21. Advanced exergy analysis of recompression supercritical CO2 cycle10.1016/j.energy.2019.04.134 ↗
22. Advanced exergy analyses to evaluate the performance of a military aircraft turbojet engine (TJE) with afterburner system: splitting exergy destruction into unavoidable/avoidable and endogenous/exogenous10.1016/j.applthermaleng.2016.09.036 ↗
23. Advanced exergy analyses of an aircraft turboprop engine (TPE)10.1016/j.energy.2017.02.121 ↗
24. Graphical exergy analysis for a scramjet thermodynamic performance evaluation10.1504/IJEX.2016.078923 ↗
25. Graphical exergy analysis of complex cycles10.1016/0360-5442(93)90040-K ↗
26. New graphical representation of exergy applied to low temperature process design10.1021/ie302541e ↗
27. Thermodynamic performance evaluation of a turbine-less jet engine integrated with solid oxide fuel cells for unmanned aerial vehicles10.1016/j.applthermaleng.2019.114093 ↗
28. Thermodynamic analysis of a solid oxide fuel cell jet hybrid engine for long-endurance unmanned air vehicles10.1016/j.enconman.2018.12.076 ↗
29. Comparative performance analysis of solid oxide fuel cell turbine-less jet engines for electric propulsion airplanes: application of alternative fuel10.1016/j.ast.2019.07.019 ↗
30. Thermodynamics analysis of a turbojet engine integrated with a fuel cell and steam injection for high-speed flight10.1016/j.energy.2019.07.016 ↗
31. Exergetic, economic, and environmental evaluations and multi-objective optimization of an internal-reforming SOFC-gas turbine cycle coupled with a Rankine cycle10.1016/j.applthermaleng.2016.07.180 ↗
32. Thermal–economic–environmental analysis and multi-objective optimization of an internal-reforming solid oxide fuel cell–gas turbine hybrid system10.1016/j.ijhydene.2012.09.143 ↗
33. Energy and exergy analysis of a chemical process system with distributed parameters based on the enthalpy-direction factor diagram10.1021/i200019a025 ↗
34. Advanced exergetic analysis: approaches for splitting the exergy destruction into endogenous and exogenous parts10.1016/j.energy.2008.12.007 ↗
35. Conventional and advanced exergy analysis of a grid connected underwater compressed air energy storage facility10.1016/j.apenergy.2019.03.135 ↗
36. Advanced exergy analysis of a combined Brayton/Brayton power cycle10.1016/j.energy.2018.10.117 ↗
37. A comparative advanced exergy analysis for a solid oxide fuel cell using the engineering and modified hybrid methods10.1016/j.enconman.2018.04.114 ↗
38. Abbas · 2017
39. Exergy-based performance analysis of a turbojet engine[C]
40. Coupling effect of operating parameters on performance of a biogas-fueled solid oxide fuel cell/gas turbine hybrid system10.1016/j.apenergy.2019.113675 ↗
41. Determination of safe operation zone for an intermediate-temperature solid oxide fuel cell and gas turbine hybrid system10.1016/j.energy.2016.01.047 ↗
42. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗