Tuning particle and phase formation of Sn/carbon nanofibers composite towards stable lithium-ion storage
Source abstract
Abstract
Abstract Sn is an attractive anodic material for lithium-ion batteries. High-temperature reduction is large-scale technique since most elemental Sn exists in the form of oxides. However, it is still a challenge to fabricate high performance Sn-based anodes with well-dispersed Sn nanoparticles in conductive matrix due to low melting point of Sn and tendency of particle agglomeration. Herein, we systematically investigate the influences of reduction conditions on particle and phase formation of Sn/carbon nanofibers (CNF) from electrospun SnO2/polyacrylonitrile. It is shown that the SnO2 can be reduced to Sn with slight aggregation at low temperature of 500 °C in a reducing atmosphere, but the composites possess poor electronic conductivity. As raising temperature, the grain size of Sn increases accordingly leading to sluggish Li+ internal diffusion dynamics. While in an inert atmosphere, the SnO2 cannot be reduced completely at low temperature until 650 °C. By optimal control, the Sn/CNF–N2-700 calcined at 700 °C in N2 atmosphere presents the best electrochemical Li-ion storage performance among these samples, which delivers a reversible capacity of 932.2 mAh g−1 at 100 mA g−1 and stable cycling life with 760.3 mAh g−1 retention after 200 cycles. This study may provide optimization guidance for industrial manufacture of Sn-based materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Encapsulating Sn nanoparticles in amorphous carbon nanotubes for enhanced lithium storage properties10.1002/aenm.201601177 ↗
2. Sulfur-grafted hollow carbon spheres for potassium-ion battery anodes
3. In situ sulfur reduction and intercalation of graphite oxides for Li-S battery cathodes10.1002/aenm.201400482 ↗
4. Tin nanoparticle-loaded porous carbon nanofiber composite anodes for high current lithium-ion batteries10.1016/j.jpowsour.2014.12.106 ↗
5. High performance amorphous-Si@SiOx/C composite anode materials for Li-ion batteries derived from ball-milling and in situ carbonization10.1016/j.jpowsour.2013.12.128 ↗
6. Advances in the development of power supplies for the Internet of Everything10.1002/inf2.12016 ↗
7. Porous Co3O4 nanofibers surface-modified by reduced graphene oxide as a durable, high-rate anode for lithium ion battery10.1016/j.electacta.2017.01.067 ↗
8. Confined growth of small ZnO nanoparticles in a nitrogen-rich carbon framework: advanced anodes for long-life Li-ion batteries10.1016/j.carbon.2016.11.039 ↗
9. A facile synthesis of Fe3O4/C composite with high cycle stability as anode material for lithium-ion batteries10.1016/j.jpowsour.2013.03.073 ↗
10. 3D spongy CoS2 nanoparticles/carbon composite as high-performance anode material for lithium/sodium ion batteries
11. Tin-based anode materials with well-designed architectures for next-generation lithium-ion batteries10.1016/j.jpowsour.2016.04.105 ↗
12. A hierarchical tin/carbon composite as an anode for lithium-ion batteries with a long cycle life10.1002/anie.201409530 ↗
13. Preparation of a porous Sn@C nanocomposite as a high-performance anode material for lithium-ion batteries10.1039/C5NR03093E ↗
14. Facile synthesis of core/shell-structured Sn/onion-like carbon nanocapsules as high-performance anode material for lithium-ion batteries10.1016/j.matlet.2014.12.055 ↗
15. Synthesis of SnO2 versus Sn crystals within N-doped porous carbon nanofibers via electrospinning towards high-performance lithium ion batteries10.1039/C5NR09305H ↗
16. Pipe-wire TiO2–Sn@carbon nanofibers paper anodes for lithium and sodium ion batteries10.1021/acs.nanolett.7b01152 ↗
17. Basil seed inspired design for a monodisperse core-shell Sn@C hybrid confined in a carbon matrix for enhanced lithium-storage performance10.1002/asia.201601180 ↗
18. Significant impact of 2D graphene nanosheets on large volume change tin-based anodes in lithium-ion batteries: a review10.1016/j.jpowsour.2014.10.008 ↗
19. Sn/carbon nanofibers fabricated by electrospinning with enhanced lithium storage capabilities10.1039/C6RA19862G ↗
20. Three-dimensional electrode with conductive Cu framework for stable and fast Li-ion storage10.1016/j.ensm.2017.09.008 ↗
21. Nanocrystal conversion-assisted design of Sn–Fe alloy with a core–shell structure as high-performance anodes for lithium-ion batteries10.1021/acsomega.8b03637 ↗
22. 3D scaffolded nickel-tin Li-ion anodes with enhanced cyclability10.1002/adma.201504780 ↗
23. Ni-Sn-based hybrid composite anodes for high-performance lithium-ion batteries10.1016/j.electacta.2018.05.022 ↗
24. Double-network nanostructured hydrogel-derived ultrafine Sn-Fe alloy in three-dimensional carbon framework for enhanced lithium storage10.1021/acs.nanolett.8b00898 ↗
25. Partially reduced SnO2 nanoparticles anchored on carbon nanofibers for high performance sodium-ion batteries10.1016/j.elecom.2016.09.012 ↗
26. Facile fabrication of binder-free metallic tin nanoparticle/carbon nanofiber hybrid electrodes for lithium-ion batteries10.1016/j.electacta.2014.12.026 ↗
27. Microemulsion syntheses of Sn and SnO2-graphite nanocomposite anodes for Li-ion batteries10.1149/1.1647571 ↗
28. Electrospun flexible Si/C@CNF nonwoven anode for high capacity and durable lithium-ion battery10.1016/j.coco.2018.10.012 ↗
29. Challenges of spinel Li4Ti5O12 for lithium-ion battery industrial applications. Adv. Energy Mater
30. Sn nanoparticles encapsulated in 3D nanoporous carbon derived from a metal-organic framework for anode material in lithium-ion batteries10.1021/acsami.7b04561 ↗
31. Flexible SnO2/N-doped carbon nanofiber films as integrated electrodes for lithium-ion batteries with superior rate capacity and long cycle life10.1002/smll.201503315 ↗
32. The densification mechanism of polyacrylonitrile carbon fibers during carbonization10.1016/S1872-5805(16)60031-8 ↗
33. Ultrasmall Sn nanoparticles embedded in spherical hollow carbon for enhanced lithium storage properties10.1039/C7CC09095A ↗
34. A self-healing Sn anode with an ultra-long cycle life for sodium-ion batteries10.1039/C8TA09544B ↗
35. Enhanced cycle stability of polypyrrole-derived nitrogen-doped carbon-coated tin oxide hollow nanofibers for lithium battery anodes10.1016/j.carbon.2016.09.057 ↗
36. Porous double-shelled SnO2@C hollow spheres as high-performance anode material for lithium ion batteries10.1016/j.electacta.2016.02.151 ↗
37. Fully reversible lithium storage of tin oxide enabled by self-doping and partial amorphization10.1039/C9NR03445E ↗
38. Carbon coated SnO2 nanoparticles anchored on CNT as a superior anode material for lithium-ion batteries10.1039/C5NR07996A ↗
39. Controllable synthesis of carbon-coated Sn-SnO2-carbon-nanofiber membrane as advanced binder-free anode for lithium-ion batteries10.1016/j.electacta.2015.12.062 ↗
40. Three-dimensional graphene/single-walled carbon nanotube aerogel anchored with SnO2 nanoparticles for high performance lithium storage10.1021/acsami.6b10807 ↗
41. Sandwich-like C@SnO2/Sn/void@C hollow spheres as improved anode materials for lithium ion batteries10.1016/j.jpowsour.2018.01.054 ↗
42. High performance binder-free Sn coated carbon nanotube array anode10.1016/j.carbon.2014.10.072 ↗
43. Kissinger
44. Combustion synthesis of high-performance Li4Ti5O12 for secondary Li-ion battery10.1016/j.ceramint.2008.10.010 ↗
45. Facile synthesis of core/shell-structured Sn/onion-like carbon nanocapsules as high-performance anode material for lithium-ion batteries10.1016/j.matlet.2014.12.055 ↗
46. Controllable fabrication of C/Sn and C/SnO/Sn composites as anode materials for high-performance lithium-ion batteries10.1016/j.cej.2017.08.066 ↗
47. Ultrafast lithium storage using antimony-doped tin oxide nanoparticles sandwiched between carbon nanofibers and a carbon skin10.1021/acsami.6b10868 ↗
48. Facile one-pot hydrothermal with subsequent carbonization preparation of hollow tin dioxide@carbon nanostructures as high-performance anode for lithium-ion batteries10.1016/j.jpowsour.2015.01.134 ↗
49. Ultrasmall Sn nanoparticles embedded in N-doped carbon nanospheres as long cycle life anode for lithium ion batteries10.1016/j.matlet.2018.04.043 ↗
50. Simple synthesis of nanostructured Sn/nitrogen-doped carbon composite using nitrilotriacetic acid as lithium ion battery anode10.1021/acs.chemmater.5b04282 ↗
51. Ultrasmall Sn nanodots embedded inside N-doped carbon microcages as high-performance lithium and sodium ion battery anodes10.1039/C7TA01480E ↗
52. Sn/SnO2@C composite nanofibers as advanced anode for lithium-ion batteries10.1016/j.electacta.2015.10.185 ↗
53. Fabrication of amorphous SnO2@C nanofibers as anode for lithium-ion batteries10.1016/j.matlet.2016.09.109 ↗
54. Reduction of the irreversible capacity in hard-carbon anode materials prepared from sucrose for Li-ion batteries10.1149/1.1838585 ↗
55. Study of irreversible capacities for Li insertion in hard and graphitic carbons10.1149/1.1837572 ↗
56. The developments of SnO2/graphene nanocomposites as anode materials for high performance lithium ion batteries: a review10.1016/j.jpowsour.2015.11.017 ↗