Use of a segmented cell for the combinatorial development of platinum group metal-free electrodes for polymer electrolyte fuel cells
Source abstract
Abstract
Abstract The development of novel platinum group metal (PGM)-free catalysts is a challenging task, particularly when coupled with the integration into a cathode catalyst layer (CCL). The optimization of such PGM-free electrode structures is often non-linear and iterative, making it a demanding task due to the high number of parameters that affect performance. To accelerate both materials discovery and electrode development, this work demonstrates the application of a high-resolution segmented cell (SC) with 121 segments of 0.413 cm2 size for combinatorial high-throughput PGM-free catalyst screening and CCL optimization. The approach utilizes three flow-field strips with active areas of 4.45 cm2 each, distributed over 11 segments. Electrodes with identical catalyst material and fabrication method result in reproducible data with typically less than 10% variation between each segment and match in performance with differential single cell data. High throughput testing of combinatorial sample sets, with varied PGM-free electrocatalyst materials or electrode composition, demonstrated the ability to rapidly discern high performing outliers, and establish or confirm trends in electrode optimization. The results indicated significant performance benefits of electrodes with ionomer content of 45 wt% over lower values, and of water rich inks with 82% water content over those with 50%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. EG&G Technical Services · 2004
2. Non-noble metal (NNM) catalysts for fuel cells: tuning the activity by a rational step-by-step single variable evolution
3. Platinum group metal-free catalysts boost cost competitiveness of fuel cell vehicles10.1038/s41929-019-0291-x ↗
4. Kinetics of oxygen reduction on Pt(hkl) electrodes: implications for the crystallite size effect with supported Pt electrocatalysts10.1149/1.1837646 ↗
5. Hydrogen oxidation and evolution reaction kinetics on carbon supported Pt, Ir, Rh, and Pd electrocatalysts in acidic media10.1149/2.0981501jes ↗
6. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective10.1021/acsenergylett.6b00644 ↗
7. ElectroCat: DOE's approach to PGM-free catalyst and electrode R&D10.1016/j.ssi.2018.01.030 ↗
8. Transition metal–nitrogen–carbon (M–N–C) catalysts for oxygen reduction reaction. Insights on synthesis and performance in polymer electrolyte fuel cells10.3390/chemengineering3010016 ↗
9. Recent advances in electrocatalysts for oxygen reduction reaction10.1021/acs.chemrev.5b00462 ↗
10. Progress in the development of Fe-based PGM-free electrocatalysts for the oxygen reduction reaction10.1002/adma.201806545 ↗
11. Advancements in rationally designed PGM-free fuel cell catalysts derived from metal–organic frameworks10.1039/C6MH00344C ↗
12. Single atomic iron catalysts for oxygen reduction in acidic media: particle size control and thermal activation10.1021/jacs.7b06514 ↗
13. Directly converting Fe−doped metal-organic frameworks into highly active and stable Fe−N-C catalysts for oxygen reduction in acid10.1016/j.nanoen.2016.04.042 ↗
14. Enhanced Fe dispersion via “pinning” effect of thiocyanate ion on ferric ion in Fe-N-S-doped catalyst as an excellent oxygen reduction reaction electrode10.1016/j.jpowsour.2017.11.093 ↗
15. Activity of atomically dispersed (AD) Fe-C-N ORR catalyst in polymer electrolyte fuel cell environment10.1149/2.0851914jes ↗
16. Atomically dispersed manganese catalysts for oxygen reduction in proton-exchange membrane fuel cells
17. Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst10.1126/science.aan2255 ↗
18. High-performance fuel cell cathodes exclusively containing atomically dispersed iron active sites10.1039/C9EE00877B ↗
19. Highly active atomically dispersed CoN4 fuel cell cathode catalysts derived from surfactant-assisted MOFs: carbon-shell confinement strategy10.1039/C8EE02694G ↗
20. Durability challenges and perspective in the development of PGM-free electrocatalysts for the oxygen reduction reaction10.1016/j.coelec.2018.04.010 ↗
21. Kinetic models for the degradation mechanisms of PGM-free ORR catalysts10.1149/08513.1239ecst ↗
22. Is the rapid initial performance loss of Fe/N/C non precious metal catalysts due to micropore flooding?10.1039/C6EE03005J ↗
23. A specific demetalation of Fe-N4 catalytic sites in the micropores of NC_Ar+NH3 is at the origin of the initial activity loss of this highly active Fe/N/C catalyst used for the reduction of oxygen in PEM fuel cell
24. Non-PGM electrocatalysts for PEM fuel cells: effect of fluorination on the activity and stability of a highly active NC_Ar + NH 3 catalyst10.1039/C9EE00867E ↗
25. The Achilles' heel of iron-based catalysts during oxygen reduction in an acidic medium10.1039/C8EE01855C ↗
26. New insights into non-precious metal catalyst layer designs for proton exchange membrane fuel cells: improving performance and stability10.1016/j.jpowsour.2017.01.086 ↗
27. Effects of MEA fabrication and ionomer composition on fuel cell performance of PGM-free ORR catalyst
28. Resolving electrode morphology's impact on platinum group metal-free cathode performance using nano-CT of 3D hierarchical pore and ionomer distribution10.1021/acsami.6b08844 ↗
29. Integrating PGM-free catalysts into catalyst layers and proton exchange membrane fuel cell devices10.1002/adma.201804846 ↗
30. Toward platinum group metal-free catalysts for hydrogen/air proton-exchange membrane fuel cells10.1595/205651318X696828 ↗
31. PGM-free electrode development and optimization using H2 limiting current
32. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
33. Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC10.1149/2.1251814jes ↗
34. Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers10.1149/2.0091813jes ↗
35. A Printed Circuit Board approach to measuring current distribution in a fuel cell10.1023/A:1003206513954 ↗
36. Further refinements in the segmented cell approach to diagnosing performance in polymer electrolyte fuel cells10.1016/S0378-7753(03)00533-0 ↗
37. New technique for two-dimensional current distribution measurements in electrochemical cells10.1023/A:1004047412066 ↗
38. In-situ methods for the determination of current distributions in PEM fuel cells, Electrochim
39. Utilizing a segmented fuel cell to study the effects of electrode coating irregularities on PEM fuel cell initial performance10.1002/fuce.201600214 ↗
40. Segmented cells as tool for development of fuel cells and error prevention/prediagnostic in fuel cell stacks10.1016/j.jpowsour.2007.03.055 ↗
41. Evaluation of current distribution in a proton exchange membrane fuel cell by segmented cell approach10.1016/S0378-7753(02)00352-X ↗
42. The effects of operating temperature on current density distribution and impedance spectroscopy by segmented fuel cell10.1016/j.ijhydene.2013.01.099 ↗
43. Effect of operating conditions on current density distribution and high frequency resistance in a segmented PEM fuel cell10.1016/j.ijhydene.2012.02.024 ↗
44. The effect of catalyst layer coating irregularities on initial fuel cell performance
45. The effect of membrane casting irregularities on initial fuel cell performance
46. Application of a segmented cell setup to detect pinhole and catalyst loading defects in proton exchange membrane fuel cells10.1016/j.electacta.2012.04.138 ↗
47. Experimental investigation of PEM fuel cell aging under current cycling using segmented fuel cell10.1016/j.ijhydene.2010.01.065 ↗
48. Separation method for oxygen mass transport coefficient in gas and ionomer phases in PEMFC GDE10.1149/2.1021410jes ↗
49. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs10.1016/j.apcatb.2004.06.021 ↗
50. Zelenay · 2018
51. Elucidation of PGM-free electrocatalyst active site functionality via in-situ X-ray absorption and operando determination of oxygen reduction reaction kinetics in a PEFC10.1016/j.apcatb.2019.117929 ↗
52. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
53. Experimental and theoretical trends of PGM-free electrocatalysts for the oxygen reduction reaction with different transition metals10.1149/2.0201907jes ↗
54. Low cost PC based scanning Kelvin probe10.1063/1.1149197 ↗
55. Doped interlayers for improved selectivity in bulk heterojunction organic photovoltaic devices10.1002/admi.201500346 ↗
56. Principles of MEA preparation
57. Elucidating the dynamic nature of fuel cell electrodes as a function of Conditioning : an ex-situ materials characterization and in-situ electrochemical diagnostic study10.1021/acsami.9b11365 ↗
58. Non precious metal catalysts for the PEM fuel cell cathode10.1016/j.ijhydene.2011.08.095 ↗
59. A review on non-precious metal electrocatalysts for PEM fuel cells10.1039/c0ee00558d ↗
60. Development of high performance carbon composite catalyst for oxygen reduction reaction in PEM Proton Exchange Membrane fuel cells10.1016/j.jpowsour.2008.05.020 ↗
61. Nitrogen-modified carbon-based catalysts for oxygen reduction reaction in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2008.11.087 ↗
62. Electrospun fiber mat cathode with platinum-group-metal-free catalyst powder and nafion/PVDF binder10.1002/celc.201800283 ↗
63. ElectroCat (Electrocatalysis Consortium) DOE annual merit review
64. Performance of a Fe-N-C catalyst for the oxygen reduction reaction in direct methanol fuel cell: cathode formulation optimization and short-term durability10.1016/j.apcatb.2016.08.043 ↗
65. Performance of catalyst layers of polymer electrolyte fuel cells: exact solutions10.1016/S1388-2481(02)00275-8 ↗
66. PEM fuel cell electrodes10.1016/j.jpowsour.2003.12.055 ↗
67. Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance10.1016/S0013-4686(00)00679-4 ↗
68. The impact of catalyst ink dispersing methodology on fuel cell performance using in-situ X-ray scattering
69. Analysis of the microstructure formation process and its influence on the performance of polymer electrolyte fuel-cell catalyst layers10.1002/celc.201500131 ↗
70. Low Pt loading high performance cathodes for PEM fuel cells10.1016/S0378-7753(02)00477-9 ↗
71. Engineering PGM-free electrodes to facilitate improved performance for the oxygen reduction reaction in polymer electrolyte fuel cells
72. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗