Electrochemical performance of La0.3Sr0.7Ti0.3Fe0.7O3-δ/CeO2 composite cathode for CO2 reduction in solid oxide electrolysis cells
Source abstract
Abstract
Abstract Solid Oxide Electrolysis Cells offer great promise for efficient recycle and cost-effective conversion of carbon dioxide. However, the conventional Ni/YSZ and some other fuel electrodes suffer some technological limitations such as the use of protecting gas CO/H2. Here we demonstrate the efficient electrochemical reduction of carbon dioxide without flowing any protecting gases based on the porous cathode with La0.3Sr0.7Ti0.3Fe0.7O3-δ(LSTF) nanostructured composite which is infiltrated into a scandia-stabilized zirconia scaffold together with ceria. The infiltrated porous electrode provides excellent performance for CO2 electrolysis. By I–V measurement and electrochemical impedance spectroscopic characterization, it shows that the current densities during electrolysis below a cell voltage of 2 V is between 1.20 and 4.44 A cm−2, increasing with temperature increase over the temperature range of 700–850 °C, and the cell with configuration of LSTF/CeO2|ScSZ|LSM/ScSZ possesses low electrode polarization resistances (Rp) within different voltage ranges, for example, Rp = 0.18 Ω cm2 at an applied voltage of 2.0 V, which is one order of magnitude lower than other reported electrode materials such as La0.2Sr0.8TiO3+δ. Moreover, a combination of short-term stability test for 48 h and cyclic stability test of LSTF/CeO2 are also estimated, and the results show that the nanostructured LSTF/CeO2 is highly effective for CO2 electrolysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · CO2 Reduction Techniques and Catalysts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Resilience and vulnerability of permafrost to climate change10.1139/X10-060 ↗
2. Predicting long-term carbon mineralization and trace gas production from thawing permafrost of Northeast Siberia10.1111/gcb.12116 ↗
3. Vulnerability of permafrost carbon to climate change: implications for the global carbon cycle10.1641/B580807 ↗
4. Understanding inflections and steps in carbon dioxide adsorption isotherms in metal-organic frameworks10.1021/ja076595g ↗
5. Adsorption of carbon dioxide at high temperature—a review
6. Electrocatalytic CO2 conversion to oxalate by a copper complex10.1126/science.1177981 ↗
7. Amine scrubbing for CO2 capture10.1126/science.1176731 ↗
8. Oxygen production on mars using solid oxide electrolysis
9. Electrolysis of carbon dioxide in solid oxide electrolysis cells10.1016/j.jpowsour.2009.02.093 ↗
10. Electrochemical approaches to alleviation of the problem of carbon dioxide accumulation10.1351/pac200173121917 ↗
11. Electrolysis of carbon dioxide for carbon monoxide production in a tubular solid oxide electrolysis cell10.1016/j.anucene.2015.02.046 ↗
12. Fischer–tropsch synthesis: current mechanism and futuristic needs10.1016/S0378-3820(01)00144-8 ↗
13. CO and CO2, hydrogenation study on supported cobalt fischer–tropsch synthesis catalysts10.1016/S0920-5861(01)00468-0 ↗
14. Co-electrolysis of steam and carbon dioxide in solid oxide cells10.1149/2.076208jes ↗
15. Ni–Fe–La(Sr)Fe(Mn)O3 as a new active cermet cathode for intermediate‐temperature CO2 electrolysis using a LaGaO3‐based electrolyte[J]10.1002/aenm.201401003 ↗
16. Efficient reduction of CO2 in a solid oxide electrolyzer10.1149/1.2943664 ↗
17. Titanate cathodes with enhanced electrical properties achieved via growing surface Ni particles toward efficient carbon dioxide electrolysis10.1039/C5CP06742A ↗
18. 25. Carbon dioxide electrolysis for production of synthesis gas in solid oxide electrolysis cells
19. Nanostructured solid oxide fuel cell electrodes10.1021/nl071007i ↗
20. Enhancing CO2 electrolysis through synergistic control of non-stoichiometry and doping to tune cathode surface structures10.1038/ncomms14785 ↗
21. A novel clean and effective syngas production system based on partial oxidation of methane assisted solid oxide co-electrolysis process10.1016/j.jpowsour.2014.11.092 ↗
22. The effect of gas compositions on the performance and durability of solid oxide electrolysis cells10.1016/j.ijhydene.2013.03.115 ↗
23. Tao · 2003
24. Direct synthesis of methane from CO2/H2O in an oxygen-ion conducting solid oxide electrolyser10.1039/c1ee01035b ↗
25. Electrolysis of H2O and CO2, in an oxygen-ion conducting solid oxide electrolyzer with a La0.2Sr0.8TiO3+ δ, composite cathode10.1016/j.jpowsour.2012.06.046 ↗
26. Microstructural degradation of Ni/YSZ electrodes in solid oxide electrolysis cells under high current10.1149/2.098308jes ↗
27. Device structure-dependent field-effect and photoresponse performances of p-type znte: Sb nanoribbons10.1039/c2jm16632a ↗
28. Effect of CO2, on the stability of strontium doped lanthanum manganite cathode10.1016/j.jpowsour.2014.06.044 ↗
29. Titanium-substituted lanthanum strontium ferrite as a novel electrode material for symmetrical solid oxide fuel cell10.1016/j.ijhydene.2015.10.010 ↗
30. Efficient conversion of CO2 in solid oxide electrolytic cells with Pd doped perovskite cathode on ceria nanofilm interlayer10.1016/j.jcou.2016.11.014 ↗
31. Improved leakage current density in Fe3+/Fe2+-doped epitaxially grown Ba0.6Sr0.4TiO3 thin films based on the domain matching model10.1209/0295-5075/106/46005 ↗
32. Carbon dioxide reduction on gadolinia-doped ceria cathodes10.1016/j.ssi.2008.04.024 ↗
33. Nano-structured composite cathodes for intermediate-temperature solid oxide fuel cells via an infiltration/impregnation technique10.1016/j.electacta.2010.02.019 ↗
34. Performance and stability of (La,Sr)MnO3–Y2O3–ZrO2, composite oxygen electrodes under solid oxide electrolysis cell operation conditions10.1016/j.ijhydene.2012.04.073 ↗
35. High‐performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
36. Cheminform abstract: enhancing SOFC cathode performance by surface modification through infiltration10.1002/chin.201522256 ↗
37. Nano-ceria pre-infiltration improves La0.6Sr0.4Co0.8Fe0.2O3−x, infiltrated solid oxide fuel cell cathode performance10.1016/j.jpowsour.2015.09.080 ↗
38. Improving La0.6Sr0.4Co0.8Fe0.2O3-δ, infiltrated solid oxide fuel cell cathode performance through precursor solution desiccation10.1016/j.jpowsour.2014.11.082 ↗
39. Optimization of Sm0.5Sr0.5CoO3−δ-infiltrated YSZ electrodes for solid oxide fuel cell/electrolysis cell10.1039/C6RA21200J ↗
40. Chemical stability and compatibility of double perovskite anode materials for sofcs10.1016/j.ssi.2013.03.005 ↗
41. Study of carbon dioxide electrolysis at electrode/electrolyte interface: Part I. Pt/YSZ interface10.1016/j.ssi.2004.01.077 ↗
42. Eliminating degradation in solid oxide electrochemical cells by reversible operation10.1038/nmat4165 ↗
43. Co-electrolysis of CO2, and H2O in solid oxide cells: performance and durability10.1016/j.ssi.2010.06.014 ↗
44. Titanate cathodes with enhanced electrical properties achieved via growing surface Ni particles toward efficient carbon dioxide electrolysis10.1039/C5CP06742A ↗
45. Degradation of solid oxide cells during co-electrolysis of steam and carbon dioxide at high current densities10.1016/j.jpowsour.2016.08.055 ↗
46. Highly stable and efficient catalyst with in situ exsolved Fe–Ni alloy nanospheres socketed on an oxygen deficient perovskite for direct co2 electrolysis10.1021/acscatal.6b01555 ↗
47. Chromate cathode decorated with in-situ, growth of copper nanocatalyst for high temperature carbon dioxide electrolysis10.1016/j.ijhydene.2014.10.053 ↗