journal article·2020-02

Structure and thermal stability of LiNi0.8Co0.15Al0.05O2 after long cycling at high temperature

Heyi Xia, Cheng Liu, Lu Shen, Jing Yu, Baohua Li, Feiyu Kang, Yan-Bing He

Publisher page

Abstract

Abstract LiNi0.8Co0.15Al0.05O2 (NCA) is widely used as cathode material in commercialized high energy density lithium ion battery due to its high specific capacity. However, the structure and thermal stability of NCA after long electrochemical cycles are remained unclear. Herein, we investigate the structure and thermal stability of aged NCA at both lithiated and delithiated states using in-situ charge/discharge and high temperature X-ray diffraction and transmission electron microscopy images. The thermal stability of delithiated NCA cathode after 400 cycles at 1C is obviously inferior to the lithiated and pristine one. The particle surface of aged NCA changes from layered to spinel phase, while the bulk area maintains the layered structure. The temperature inducing structure change of aged NCA is much lower than that of pristine NCA and the delithiated state of NCA is more vulnerable at high temperature. The drastic structure transformation of aged NCA occurs at 250 °C during heating, which accompanies with oxygen loss and the formation of intergranular cracks in the NCA secondary particles. Thus, this work provides significant information of structure stability of cycled NCA at high temperature for optimizing its surface structure to achieve excellent cycling performance under extreme conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Building better batteries10.1038/451652a ↗
3. Thermal runaway propagation model for designing a safer battery pack with 25 Ah LiNiCoMnO2 large format lithium ion battery10.1016/j.apenergy.2015.04.118 ↗
4. A mule cloned from fetal cells by nuclear transfer10.1126/science.1086743 ↗
5. Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries10.1038/srep30248 ↗
6. Coupled mechanical-electrical-thermal modeling for short-circuit prediction in a lithium-ion cell under mechanical abuse10.1016/j.jpowsour.2015.04.162 ↗
7. Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles10.1016/j.rser.2016.03.013 ↗
8. Deformation and stress in electrode materials for Li-ion batteries10.1016/j.pmatsci.2014.02.001 ↗
9. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
10. Roles of positive or negative electrodes in the thermal runaway of lithium-ion batteries: accelerating rate calorimetry analyses with an all-inclusive microcell10.1016/j.elecom.2017.02.008 ↗
11. Thermal stability and reactivity of cathode materials for Li-ion batteries10.1021/acsami.5b12081 ↗
12. Multi-scale study of thermal stability of lithiated graphite10.1039/c1ee01786a ↗
13. Thermal behaviour of the lithiated-graphite/electrolyte interface through GC/MS analysis10.1016/j.electacta.2012.08.016 ↗
14. A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine–ceramic composite modification of polyolefin membranes10.1039/C6EE01219A ↗
15. Thermal stability and kinetics of delithiated LiCoO210.1016/j.jpowsour.2010.09.076 ↗
16. Thermal runaway of lithium-ion batteries without internal short circuit10.1016/j.joule.2018.06.015 ↗
17. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries10.1038/ncomms4529 ↗
18. Synthesis of spherical LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries by a co-oxidation-controlled crystallization method10.1016/j.cclet.2011.01.041 ↗
19. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
20. Degradation analysis of a Ni-based layered positive-electrode active material cycled at elevated temperatures studied by scanning transmission electron microscopy and electron energy-loss spectroscopy10.1016/j.jpowsour.2011.05.017 ↗
21. Investigation of changes in the surface structure of LixNi0.8Co0.15Al0.05O2 cathode materials induced by the initial charge10.1021/cm403332s ↗
22. Structural origin of overcharge-induced thermal instability of Ni-containing layered-cathodes for high-energy-density lithium batteries10.1021/cm201452q ↗
23. Oxygen-release-related thermal stability and decomposition pathways of LixNi0.5Mn1.5O4 cathode materials10.1021/cm403400y ↗
24. Thermal stability in the blended lithium manganese oxide – lithium nickel cobalt manganese oxide cathode materials: an in situ time-resolved X-Ray diffraction and mass spectroscopy study10.1016/j.jpowsour.2014.12.015 ↗
25. The thermal stability of fully charged and discharged LiCoO2 cathode and graphite anode in nitrogen and air atmospheres10.1016/j.tca.2008.09.019 ↗
26. Time-resolved XRD study on the thermal decomposition of nickel-based layered cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.01.043 ↗
27. Tuning of thermal stability in layered Li(NixMnyCoz)O210.1021/jacs.6b07771 ↗
28. Thermal stability of Li1−yNixMn(1−x)/2Co(1−x)/2O2 layer-structured cathode materials used in Li-Ion batteries10.1016/j.jpowsour.2011.01.016 ↗
29. A first-principles approach to studying the thermal stability of oxide cathode materials10.1021/cm0620943 ↗
30. The effect of Al substitution on the reactivity of delithiated LiNi1/3Mn1/3Co(1/3−z)AlzO2 with non-aqueous electrolyte10.1016/j.elecom.2008.05.036 ↗
31. Facet-dependent thermal instability in LiCoO210.1021/acs.nanolett.6b04502 ↗
32. Correlating structural changes and gas evolution during the thermal decomposition of charged LixNi0.8Co0.15Al0.05O2 cathode materials10.1021/cm303096e ↗
33. Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode10.1038/s41467-018-04862-w ↗
34. A comparative study on the oxidation state of lattice oxygen among Li1.14Ni0.136Co0.136Mn0.544O2, Li2MnO3, LiNi0.5Co0.2Mn0.3O2 and LiCoO2 for the initial charge–discharge10.1039/C5TA02161H ↗
35. Combining in situ synchrotron X-ray diffraction and absorption techniques with transmission electron microscopy to study the origin of thermal instability in overcharged cathode materials for lithium-ion batteries10.1002/adfm.201200693 ↗
36. Probing thermally induced decomposition of delithiated Li(1.2-x)Ni(0.15)Mn(0.55)Co(0.1)O2 by in situ high-energy X-ray diffraction10.1021/am502689f ↗
37. A review of hazards associated with primary lithium and lithium-ion batteries10.1016/j.psep.2011.06.022 ↗
38. Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite–SiOx power batteries under high temperature and discharge cycling conditions10.1039/C7TA08703A ↗
39. Synthesis and structural characterization of the normal spinel LiNi2O410.1016/0025-5408(85)90087-X ↗
40. Activation mechanism of LiNi0.80Co0.15Al0.05O2: surface and bulk operando electrochemical, differential electrochemical mass spectrometry, and X-ray diffraction analyses10.1021/cm503833b ↗
41. Structural and electrochemical properties of LiNi0.70Co0.15Al0.15O210.1016/S0167-2738(03)00106-1 ↗
42. Investigating the kinetic effect on structural evolution of LixNi0.8Co0.15Al0.05O2 cathode materials during the initial charge/discharge10.1021/acs.chemmater.6b03282 ↗
43. Air-tolerantly surface-initiated AGET ATRP mediated by iron catalyst from silica nanoparticles10.1002/pola.23968 ↗
44. A thermogravimetric analysis/mass spectroscopy study of the thermal and chemical stability of carbon in the Pt/C catalytic system10.1016/j.carbon.2010.02.034 ↗
45. Understanding the degradation mechanisms of LiNi0.5Co0.2Mn0.3O2 cathode material in lithium ion batteries10.1002/aenm.201300787 ↗
46. Local state-of-charge mapping of lithium-ion battery electrodes10.1002/adfm.201100157 ↗
47. Na+/vacancy disordering promises high-rate Na-ion batteries
48. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗