A direct ethylene glycol fuel cell stack as air-independent power sources for underwater and outer space applications
Source abstract
Abstract
Abstract A passive direct ethylene glycol fuel cell stack is developed and tested, in which each single cell consists of an alkaline Pd-based anode, an acid Au-based cathode, and a cation exchange membrane. Experimentally, at the optimal reactant-feeding concentrations of 5.0 M EG and 9.0 M KOH as anolyte and 4.0 M H2O2 and 1.0 M H2SO4 as catholyte, this passive stack yields an open-circuit voltage of 3.0 V, a maximum current of 860 mA, and a peak power of 1178 mW at room temperature, which exhibits a two-time higher peak power density (24.5 mW cm−2) than a passive stack using the same type of fuel but the air as oxidant (12 mW cm−2). The impressive improvement can be ascribed to the faster hydrogen peroxide reduction reaction due to its two-electron transfer process rather than a four-electron process. In addition, the effects of feeding concentrations of reactants in both anolyte and catholyte on the stack performance are studied. Finally, the present passive stack is applied to power an electric fan for around 3 h under the mimetic underwater circumstance, demonstrating that this passive stack is a promising power source for airtight situations, such as underwater and outer space.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Advances and challenges in alkaline anion exchange membrane fuel cells10.1016/j.pecs.2018.01.001 ↗
2. Recent advances in alkali-doped polybenzimidazole membranes for fuel cell applications10.1016/j.rser.2018.03.024 ↗
3. Recent advances in fuel cells based propulsion systems for unmanned aerial vehicles10.1016/j.apenergy.2019.02.079 ↗
4. A sodium-ion-conducting direct formate fuel cell: generating electricity and producing base10.1002/anie.201701816 ↗
5. Tin-based materials as versatile anodes for alkali (earth)-ion batteries10.1016/j.jpowsour.2018.05.063 ↗
6. Direct ethanol fuel cell (DEFC): electrical performances and reaction products distribution under operating conditions with different platinum-based anodes10.1016/j.jpowsour.2005.08.027 ↗
7. Hydroxide self-feeding high-temperature alkaline direct formate fuel cells10.1002/cssc.201700228 ↗
8. Mass transport phenomena in direct methanol fuel cells10.1016/j.pecs.2009.01.001 ↗
9. Transport phenomena in alkaline direct ethanol fuel cells for sustainable energy production10.1016/j.jpowsour.2016.11.117 ↗
10. Insight into interface behaviors to build phase-boundary-matched Na-ion direct liquid fuel cells10.1021/acssuschemeng.8b02084 ↗
11. Direct ethylene glycol fuel-cell stack—study of oxidation intermediate products10.1016/j.jpowsour.2007.07.054 ↗
12. Recent progress in alkaline direct ethylene glycol fuel cells for sustainable energy production10.1016/j.jpowsour.2016.08.105 ↗
13. Recent achievements in direct ethylene glycol fuel cells (DEGFC)10.1016/j.apcatb.2010.04.011 ↗
14. Ethylene glycol: properties, synthesis, and applications10.1039/c2cs15359a ↗
15. PdAg/CNT catalyzed alcohol oxidation reaction for high-performance anion exchange membrane direct alcohol fuel cell (alcohol=methanol, ethanol, ethylene glycol and glycerol)10.1016/j.apcatb.2016.06.055 ↗
16. 3D graphene-mixed metal oxide-supported carbonpalladium quantum dot nanoarchitectures – a facile bifunctional electrocatalyst for direct ethylene glycol fuel cells and oxygen evolution reactions10.1016/j.ijhydene.2016.07.179 ↗
17. Electro-oxidation of ethylene glycol and glycerol at palladium-decorated FeCo@Fe core–shell nanocatalysts for alkaline direct alcohol fuel cells: functionalized MWCNT supports and impact on product selectivity10.1039/C5TA00076A ↗
18. Alkaline anion exchange membrane fuel cells for cogeneration of electricity and valuable chemicals10.1016/j.jpowsour.2017.09.013 ↗
19. Selectivity of ion exchange membranes: a review10.1016/j.memsci.2018.03.051 ↗
20. Comparison of different types of membrane in alkaline direct ethanol fuel cells10.1016/j.ijhydene.2012.06.105 ↗
21. Performance of a direct ethylene glycol fuel cell with an anion-exchange membrane10.1016/j.ijhydene.2010.02.009 ↗
22. An alkaline direct ethylene glycol fuel cell with an alkali-doped polybenzimidazole membrane10.1016/j.ijhydene.2013.06.042 ↗
23. 3D platinum–lead nanowire networks as highly efficient ethylene glycol oxidation electrocatalysts10.1002/smll.201601620 ↗
24. Mathematical modeling of direct ethylene glycol fuel cells incorporating the effect of the competitive adsorption10.1016/j.applthermaleng.2018.10.073 ↗
25. High-power direct ethylene glycol fuel cell (DEGFC) based on nanoporous proton-conducting membrane (NP-PCM)10.1016/S0378-7753(01)01028-X ↗
26. One-step hydrothermal synthesis of three-dimensional nitrogen-doped reduced graphene oxide hydrogels anchored PtPd alloyed nanoparticles for ethylene glycol oxidation and hydrogen evolution reactions10.1016/j.electacta.2018.10.068 ↗
27. Platinum69-cobalt31 alloyed nanosheet nanoassemblies as advanced bifunctional electrocatalysts for boosting ethylene glycol oxidation and oxygen reduction10.1016/j.jcis.2018.04.050 ↗
28. One-step synthesis of PtCu alloyed nanocages with highly open structures as bifunctional electrocatalysts for oxygen reduction and polyhydric alcohol oxidation
29. Performance of a hybrid direct ethylene glycol fuel cell10.1002/er.4176 ↗
30. A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell10.1016/j.ijhydene.2015.12.178 ↗
31. A split pH direct liquid fuel cell powered by propanol or glycerol10.1016/j.apenergy.2019.113323 ↗
32. Mass transport phenomena in direct methanol fuel cells10.1016/j.pecs.2009.01.001 ↗
33. Development of an alkaline anion exchange membrane direct ethylene glycol fuel cell stack10.1149/1.3635728 ↗
34. Performance of a passive direct ethanol fuel cell10.1016/j.jpowsour.2013.12.036 ↗
35. A passive anion-exchange membrane direct ethanol fuel cell stack and its applications10.1016/j.ijhydene.2016.08.180 ↗
36. Approaches to overcome the barrier issues of passive direct methanol fuel cell – Review10.1016/j.rser.2016.09.002 ↗
37. Performance characteristics of a passive direct ethylene glycol fuel cell with hydrogen peroxide as oxidant10.1016/j.apenergy.2019.05.072 ↗
38. Electrooxidation of ethylene glycol and glycerol on Pd‐(Ni‐Zn)/C anodes in direct alcohol fuel cells10.1002/cssc.201200866 ↗
39. Electro-oxidation of ethylene glycol and glycerol at palladium-decorated FeCo@ Fe core–shell nanocatalysts for alkaline direct alcohol fuel cells: functionalized MWCNT supports and impact on product selectivity10.1039/C5TA00076A ↗
40. A novel direct ethanol fuel cell with high power density10.1016/j.jpowsour.2011.03.040 ↗
41. Performance of an alkaline-acid direct ethanol fuel cell10.1016/j.ijhydene.2011.04.150 ↗
42. Electrooxidation of ethylene glycol and glycerol on Pd-(Ni-Zn)/C anodes in direct alcohol fuel cells10.1002/cssc.201200866 ↗
43. Direct NaBH4/H2O2 fuel cells10.1016/j.jpowsour.2006.10.062 ↗
44. Clarifying the Butler–Volmer equation and related approximations for calculating activation losses in solid oxide fuel cell models10.1016/j.jpowsour.2005.03.174 ↗
45. Larminie · 2003
46. Low cost electrodes for proton exchange membrane fuel cells: performance in single cells and ballard stacks10.1149/1.1838101 ↗
47. The impact of anode design on fuel crossover of direct ethanol fuel cell10.1007/s12034-015-1130-6 ↗
48. Cost analysis of direct methanol fuel cell stacks for mass production10.3390/en9121008 ↗
49. A high output voltage direct borohydride fuel cell10.1149/1.1817855 ↗