journal article·2019-07

Suspension synthesis of Na3-PS4-Cl solid electrolytes

Miwa Uematsu, So Yubuchi, Fumika Tsuji, Atsushi Sakuda, Akitoshi Hayashi, Masahiro Tatsumisago

Publisher page

Abstract

Abstract All-solid-state sodium batteries with sulfide-based solid electrolytes are attracting attention as next-generation energy storage systems to replace Li-ion batteries, owing to their improved safety and the abundant sodium resources. Na3PS4-based materials, which have relatively high conductivities and favorable mechanical properties, make promising Na-ion solid electrolytes for realizing all-solid-state sodium batteries. However, it is essential to establish a further simple and effective protocol for manufacturing such solid electrolytes and composite electrodes. In this study, Na3-xPS4-xClx (x = 0, 0.0625) was prepared by a liquid-phase (suspension) process from Na2S, P2S5, and NaCl using 1,2-dimethoxyethane as a reaction media. Na3PS4 heated at 400 °C and Na2.9375PS3.9375Cl0.0625 heated at 480 °C exhibited Na-ion conductivities of 2.6 × 10−4 and 4.3 × 10−4 S cm−1 at 25 °C, respectively. A homogenous composite electrode was prepared with TiS2 active material and Na3PS4 solid electrolyte via the simple liquid-phase process, resulting in large contact areas between electrode and electrolyte particles. The electrode obtained by liquid-phase provided an all-solid-state cell with higher reversible capacity of 161 mAh g−1 than a conventional mechanically mixed electrode. Suspension syntheses of Na3-xPS4-xClx are useful for the simple production of solid electrolytes and are highly applicable to all-solid-state sodium batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Development of sulfide solid electrolytes and interface formation processes for bulk-type all-solid state Li and Na batteries10.3389/fenrg.2016.00025 ↗
2. High temperature sodium batteries: status, challenges and future trends10.1039/c3ee24086j ↗
3. Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries10.1038/ncomms1843 ↗
4. High sodium ion conductivity of glass–ceramic electrolytes with cubic Na3PS410.1016/j.jpowsour.2014.02.054 ↗
5. Preparation and characterization of highly sodium ion conducting Na3PS4–Na4SiS4 solid electrolytes10.1039/C4RA00996G ↗
6. Room-temperature all-solid-state rechargeable sodium-ion batteries with a Cl-doped Na3PS4 superionic conductor10.1038/srep33733 ↗
7. Vacancy-driven Na+ superionic conduction in new Ca-doped Na3PS4 for all-solid-state Na-ion batteries10.1021/acsenergylett.8b01479 ↗
8. Vacancy-contained tetragonal Na3SbS4 superionic conductor10.1002/advs.201600089 ↗
9. An air‐stable Na3SbS4 superionic conductor prepared by a rapid and economic synthetic procedure10.1002/anie.201601546 ↗
10. Na3SbS4: a solution processable sodium superionic conductor for all‐solid‐state sodium‐ion batteries10.1002/anie.201604158 ↗
11. Nanoscaled Na3PS4 solid electrolyte for all-solid-state FeS2/Na batteries with ultrahigh initial coulombic efficiency of 95% and excellent cyclic performances10.1021/acsami.8b01805 ↗
12. Sodium-ion conducting Na3PS4 electrolyte synthesized via a liquid-phase process using N-methylformamide10.1246/cl.150195 ↗
13. Preparation of Na3PS4 electrolyte by liquid-phase process using ether10.1016/j.ssi.2017.12.021 ↗
14. Anomalous high ionic conductivity of nanoporous β-Li3PS410.1021/ja3110895 ↗
15. A synthesis of crystalline Li7P3S11 solid electrolyte from 1,2-dimethoxyethane solvent10.1016/j.jpowsour.2014.08.024 ↗
16. An iodide-based Li7P2S8I superionic conductor10.1021/ja508723m ↗
17. Solution‐processable glass LiI‐Li4SnS4 superionic conductors for all‐solid‐state Li‐ion batteries10.1002/adma.201505008 ↗
18. Preparation of high lithium-ion conducting Li6PS5Cl solid electrolyte from ethanol solution for all-solid-state lithium batteries10.1016/j.jpowsour.2015.05.093 ↗
19. Lithium-ion-conducting argyrodite-type Li6PS5X (X = Cl, Br, I) solid electrolytes prepared by a liquid-phase technique using ethanol as a solvent10.1021/acsaem.8b00280 ↗
20. An argyrodite sulfide-based superionic conductor synthesized by a liquid-phase technique with tetrahydrofuran and ethanol10.1039/C8TA09477B ↗
21. All-solid-state lithium secondary batteries using LiCoO2 particles with pulsed laser deposition coatings of Li2S–P2S5 solid electrolytes10.1016/j.jpowsour.2010.10.103 ↗
22. Effects of the microstructure of solid-electrolyte-coated LiCoO2 on its discharge properties in all-solid-state lithium batteries10.1039/C7TA01227F ↗
23. All-solid-state cells with Li4Ti5O12/carbon nanotube composite electrodes prepared by infiltration with argyrodite sulfide-based solid electrolytes via liquid-phase processing10.1016/j.jpowsour.2019.01.070 ↗
24. Improvement of rate performance for all-solid-state Na15Sn4/amorphous TiS3 cells using 94Na3PS4·6Na4SiS4 glass-ceramic electrolytes10.1149/2.0011506jes ↗
25. Sodium superionic conduction in tetragonal Na3PS410.1016/j.jssc.2018.06.023 ↗
26. Interfacial reactivity benchmarking of the sodium ion conductors Na3PS4 and sodium β-alumina for protected sodium metal anodes and sodium all-solid-state batteries10.1021/acsami.6b10119 ↗
27. New insights into the interphase between the Na metal anode and sulfide solid-state electrolytes: a joint experimental and computational study10.1021/acsami.7b19037 ↗