Cell optimisation of supercapacitors using a quasi-reference electrode and potentiostatic analysis
Source abstract
Abstract
A new criterion and potentiostatic method is demonstrated to determine the electrochemically stable potential window (ESPW) of supercapacitors, enabling the calculation of the optimal electrode mass ratio for two different electrode-electrolyte pairings. The criterion uses the decay of electrode current in a three-electrode test cell during potentiostatic ageing at progressively higher voltages to determine the ESPW. To perform these measurements a quasi-reference electrode (QRE) was incorporated within a CR2032 coin cell with a small and simple modification. This enabled three-electrode measurements to be performed inside the coin cell using organic electrolytes whilst outside a glovebox. The voltage-optimised mass ratio (m+/m−) for activated carbon electrodes in 1 M tetraethylammonium tetrafluoroborate (TEABF4) in acetonitrile (ACN) and propylene carbonate (PC) electrolytes was shown to be 2.38 and 0.61 respectively. The validity of the technique was verified by full-cell potentiostatic ageing experiments on mass-balanced and mass-symmetric supercapacitors. For both electrolytes the maximum operating voltage, energy storage capacity and cycle lifetime were improved significantly with mass balancing. The maximum voltage increased from 2.0 V to 2.9 V for ACN and from 2.3 V to 2.7 V for PC, whilst the energy density increased by ∼90% for ACN and by ∼40% for PC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Capacitance enhancement of polyaniline coated curved-graphene supercapacitors in a redox-active electrolyte10.1039/c3nr00773a ↗
2. A simple electrochemical route to metallic phase trilayer MoS2: evaluation as electrocatalysts and supercapacitors10.1039/C7TA02577G ↗
3. Ionic liquids for hybrid supercapacitors10.1016/j.elecom.2004.04.005 ↗
4. Room-temperature phosphonium ionic liquids for supercapacitor application10.1063/1.1906320 ↗
5. Optimal electrode mass ratio in nanoporous carbon electrochemical supercapacitors10.1021/acs.jpcc.6b07759 ↗
6. Effect of electrode mass ratio on aging of activated carbon based supercapacitors utilizing organic electrolytes10.1016/j.jpowsour.2010.11.157 ↗
7. Mass-balancing of electrodes as a strategy to widen the operating voltage window of carbon/carbon supercapacitors in neutral aqueous electrolytes10.1016/S1452-3981(23)13111-7 ↗
8. A reliable determination method of stability limits for electrochemical double layer capacitors10.1016/j.electacta.2013.04.057 ↗
9. Aging of electrochemical double layer capacitors with acetonitrile-based electrolyte at elevated voltages10.1016/j.electacta.2010.02.064 ↗
10. A comparison of the aging of electrochemical double layer capacitors with acetonitrile and propylene carbonate-based electrolytes at elevated voltages10.1016/j.electacta.2009.11.098 ↗
11. Characterization of MoS2–graphene composites for high-performance coin cell supercapacitors10.1021/acsami.5b04672 ↗
12. Best practice methods for determining an electrode material's performance for ultracapacitors10.1039/c0ee00074d ↗
13. A better quantification of electrochemical stability limits for electrolytes in double layer capacitors10.1016/S0013-4686(01)00358-9 ↗
14. Supercapacitor and supercapattery as emerging electrochemical energy stores10.1080/09506608.2016.1240914 ↗
15. Materials for electrochemical capacitors10.1038/nmat2297 ↗
16. Graphene-based materials for supercapacitor electrodes–A review
17. A review of electrolyte materials and compositions for electrochemical supercapacitors10.1039/C5CS00303B ↗
18. Fields · 2018
19. Design and use of three electrode coin cells for studying redox shuttles
20. Effect of pore texture on performance of activated carbon supercapacitor electrodes derived from olive pits10.1016/j.electacta.2015.02.006 ↗
21. Two and three electrode electrochemical cells for ambient and high temperature battery materials research
22. Measurements and simulations of electrochemical impedance spectroscopy of a three-electrode coin cell design for Li-Ion cell testing10.1149/2.0311409jes ↗
23. Self-assembled monolayers in organic solvents: electrochemistry at alkanethiolate-coated gold in propylene carbonate10.1021/la00036a051 ↗
24. Delhaes · 2000
25. Practical problems in voltammetry 3: reference electrodes for voltammetry
26. Chemical and electrochemical ageing of carbon materials used in supercapacitor electrodes10.1016/j.carbon.2008.07.025 ↗
27. Electrochemical stability of organic electrolytes in supercapacitors: spectroscopy and gas analysis of decomposition products10.1016/j.jpowsour.2007.08.070 ↗
28. Gas evolution in activated carbon/propylene carbonate based double-layer capacitors10.1016/j.elecom.2005.06.015 ↗
29. Degradation responses of activated-carbon-based EDLCs for higher voltage operation and their factors10.1149/1.3126423 ↗
30. Optimisation of an asymmetric manganese oxide/activated carbon capacitor working at 2 V in aqueous medium10.1016/j.jpowsour.2005.03.210 ↗
31. The limitations of energy density of battery/double-layer capacitor asymmetric cells10.1149/1.1559067 ↗
32. High-voltage asymmetric supercapacitors operating in aqueous electrolyte10.1007/s00339-005-3397-8 ↗
33. Anomalous increase in carbon capacitance at pore sizes less than 1 nanometer10.1126/science.1132195 ↗
34. Determination of the upper and lower potential limits of the activated carbon/propylene carbonate system for electrical double-layer capacitors10.1016/j.jelechem.2016.04.004 ↗
35. Performance of carbon–carbon supercapacitors based on organic, aqueous and ionic liquid electrolytes10.1016/j.jpowsour.2010.03.082 ↗