Woven gas diffusion layers for polymer electrolyte membrane fuel cells: Liquid water transport and conductivity trade-offs
Source abstract
Abstract
Abstract Gas diffusion layers (GDLs) provide pathways for water removal in a polymer electrolyte membrane (PEM) Fuel Cell. Woven GDLs, have shown higher capability to retain water and improve performance under humid conditions compared to non-woven GDLs. In this work, we investigate water transport, distribution and location of breakthrough in woven GDLs using fluorescent microscopy. GDLs with no coating, 30, and 55 wt% fluorinate ethylene propylene (FEP) were investigated. FEP increases hydrophobicity and affects thermal and electrical conductivities. The results show that the FEP-treated GDLs have higher breakthrough pressures and water contact angles than non-treated GDLs. For untreated samples, water breakthrough occurs in non-compressed regions; whereas, for FEP-treated samples emergence occurs in the compressed regions. Furthermore, water was observed to first cover visible pores inside the GDLs prior to breakthrough. Increasing FEP loading promotes the propagation of water inside the GDLs. Thermal conductivity is found to improve with FEP coating and attains a maximum at 30 wt% FEP loading, whereas electrical conductivity decreases with increasing FEP loading. This analysis shows more pores are engaged in water transport with higher FEP loading. Implementation of woven GDLs in fuel cell design requires a balancing of the water and heat transport benefits with the reduced electrical conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Diffusion media materials and characterisation
2. Effect of compression on liquid water transport and microstructure of PEMFC gas diffusion layers10.1016/j.jpowsour.2006.09.045 ↗
3. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
4. Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance10.1016/j.fuel.2010.09.003 ↗
5. Engineered water highways in fuel cells: radiation grafting of gas diffusion layers10.1002/adma.201503557 ↗
6. Diffusion media materials and characterisation
7. Water flow in the gas diffusion layer of PEM fuel cells10.1016/j.memsci.2005.03.049 ↗
8. Water management in a PEMFC: water transport mechanism and material degradation in gas diffusion layers10.1002/fuce.201000172 ↗
9. Water management studies in PEM fuel cells, part III: dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLs10.1016/j.ijhydene.2010.01.012 ↗
10. Investigation of liquid water in gas diffusion layers of polymer electrolyte fuel cells using X-ray tomographic microscopy10.1016/j.electacta.2010.12.016 ↗
11. Characterization of transport phenomena in porous transport layers using X-ray microtomography10.1016/j.jpowsour.2017.03.153 ↗
12. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
13. Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomography10.1016/j.elecom.2015.02.005 ↗
14. Microscale X-ray tomographic investigation of the interfacial morphology between the catalyst and micro porous layers in proton exchange membrane fuel cells10.1016/j.jpowsour.2016.04.031 ↗
15. Transactions · 2017 · vol. 80 · 395
16. Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers10.1016/j.jpowsour.2005.03.199 ↗
17. Analysis of gas diffusion layer and flow-field design in a PEMFC using neutron radiography10.1149/1.2823003 ↗
18. Thermal conductivity of catalyst layer of polymer electrolyte membrane fuel cells: Part 1-Experimental study10.1016/j.jpowsour.2017.02.016 ↗
19. Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells. Part 1: effect of compressive load10.1016/j.jpowsour.2010.06.039 ↗
20. An improved transient plane source method for measuring thermal conductivity of thin films: deconvoluting thermal contact resistance10.1016/j.ijheatmasstransfer.2016.01.037 ↗
21. Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell10.1016/j.jpowsour.2009.06.077 ↗
22. Through-plane thermal conductivity of PEMFC porous transport layers10.1115/1.4002403 ↗
23. Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2013.04.140 ↗
24. Ageing and thermal conductivity of porous transport layers used for PEM fuel cells10.1016/j.jpowsour.2012.08.027 ↗
25. Study of thermal conductivity of PEM fuel cell catalyst layers10.1016/j.ijhydene.2014.03.206 ↗
26. Heterogeneous through-plane porosity distributions for treated PEMFC GDLs. II. Effect of MPL cracks10.1149/1.3594636 ↗
27. Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials10.1016/j.jpowsour.2006.06.092 ↗
28. Inhomogeneous compression of PEMFC gas diffusion layer: part I10.1016/j.jpowsour.2006.11.018 ↗
29. Determination of material properties of gas diffusion layers: experiments and simulations using phase contrast tomographic microscopy10.1149/1.3176876 ↗
30. Numerical estimation of the effective electrical conductivity in carbon paper diffusion media10.1016/j.apenergy.2011.08.037 ↗
31. Multi-objective optimization of a polymer electrolyte fuel cell membrane electrode assembly10.1039/b804654a ↗
32. Numerical optimization of proton exchange membrane fuel cell cathodes10.1016/j.electacta.2006.09.049 ↗