journal article·2018-09

A novel high voltage battery cathodes of Fe 2+ /Fe 3+ sodium fluoro sulfate lined with carbon nanotubes for stable sodium batteries

Ranjusha Rajagopalan, Zhenguo Wu, Yumei Liu, Shaymaa Al-Rubaye, Enhui Wang, Chunjin Wu, Wei Xiang, Benhe Zhong, Xiaodong Guo, Shi Xue Dou, Hua Kun Liu

Publisher page

Abstract

Abstract Current trends in battery research are promoting the development of feasible methods to prepare electrode materials with new architectures that can meet the requirements of high energy density associated with sodium ion batteries (SIB). It is logical to use solid-state processing techniques to fabricate SIB electrode materials due to its ease of handling and capability for large-scale production. From the SIB standpoint, the sulfate based polyanionic system is well known for its high operating voltage. The present study utilizes a hitherto-unknown solid-state process with an entirely new composition to develop an electrode comprising earth abundant carbon, sodium, sulfur, fluorine, and iron materials. This new NaFeSO4F-CNT system, where CNT is carbon nanotube, obtained by the solid-state technique, exhibits a highly stable Fe2+/Fe3+ redox couple and achieves a capacity of ∼110 mAg−1 at 0.1C with capacity retention of >91% after 200 cycles (1C). This is the best-ever reversible, high potential sulfate based cathode for sodium ion batteries reported to date. This study also provides an in-depth understanding of the outstanding electrochemical performance of this novel electrode. These findings can make it possible to achieve maximum performance from potential electrodes, when the operating temperature is limited to 350 °C or below.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Is lithium the new gold?10.1038/nchem.680 ↗
2. A 3.8-V earth-abundant sodium battery electrode10.1038/ncomms5358 ↗
3. Phospho-olivines aspositive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
4. Enhancing sodium ion battery performance by strongly binding nanostructured Sb2S3 on sulfur-doped graphene sheets10.1021/acsnano.6b05653 ↗
5. Key challenges in future Li-battery research10.1098/rsta.2010.0112 ↗
6. Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-ion batteries10.1002/adfm.201100854 ↗
7. Electrochemical insertion of sodium in NaxCoO2 bronzes10.1016/0167-2738(81)90076-X ↗
8. A CNT cocoon on sodium manganate nanotubes forming a core/branch cathode coupled with a helical carbon nanofibre anode for enhanced sodium ion batteries10.1039/C6TA05069G ↗
9. Facile fabrication of integrated three-dimensional C-MoSe2/reduced graphene oxide composite with enhanced performance for sodium storage10.1007/s12274-016-1056-3 ↗
10. Mapping of transition metal redox energies in phosphates with NASICON structure by lithium intercalation10.1149/1.1837868 ↗
11. Structural, transport, and electrochemical investigation of novel AMSO4F (A = Na, Li; M = Fe, Co, Ni, Mn) metal fluorosulphates prepared using low temperature synthesis routes10.1021/ic100583f ↗
12. Synthesis and crystal chemistry of the NaMSO4F family (M=Mg, Fe, Co, Cu, Zn)10.1016/j.solidstatesciences.2011.09.004 ↗
13. Scalable synthesis of tavorite LiFeSO4F and NaFeSO4F cathode materials10.1002/anie.201003743 ↗
14. Alkali-ion conduction paths in LiFeSO4F and NaFeSO4F tavorite-type cathode materials10.1021/cm200683n ↗
15. Magnetic structure and properties of NaFeSO4F and NaCoSO4F10.1103/PhysRevB.85.094415 ↗
16. Understanding and controlling the surface chemistry of LiFeSO4F for an enhanced cathode functionality10.1021/cm401063s ↗
17. Synthesis and electrochemical evolution of mesoporous LiFeSO4F0.56(OH)0.44 with high power and long cyclability10.1039/C4CC06174H ↗
18. Infrared spectral evidence for the etching of carbon nanotubes: ozone oxidation at 298 K10.1021/ja994094s ↗
19. Raman spectroscopic characterization of single walled carbon nanotubes: influence of the sample aggregation state10.1039/C3AN00642E ↗
20. Raman spectroscopy on isolated single wall carbon nanotubes10.1016/S0008-6223(02)00066-0 ↗
21. FTIR and Raman spectroscopy of carbon nanoparticles in SiO2, ZnO and NiO matrices10.1007/s11671-008-9172-y ↗
22. Raman spectrum of graphite10.1063/1.1674108 ↗
23. Determination of crystallite size in polished graphitized carbon by Raman spectroscopy10.1103/PhysRevB.86.134205 ↗
24. Kröhnkite-TypeNa2Fe(SO4)2·2H2O as a novel 3.25 V insertion compound for Na-ion batteries10.1021/cm4033226 ↗
25. Superior sodium–lithium intercalation and depressed moisture sensitivity of a hierarchical sandwich-type nanostructure for a graphene– sulfate composite: a case study on Na2Fe(SO4)2.2H2O10.1039/C4TA06711H ↗
26. Off-stoichiometry in alluaudite-type sodium iron sulfate Na2+2xFe2-x (SO4)3 as an advanced sodium battery cathode material10.1002/celc.201500036 ↗
27. Iron(III) sulfate: a stable, cost effective electrode material for sodium ion batteries10.1039/C3CC47557C ↗
28. Eldfellite, NaFe(SO4)2: an intercalation cathode host for low-cost Na-ion batteries10.1039/C5EE02274F ↗
29. Synthesis and electrochemistry of Na2.5(Fe1-yMny)1.75(SO4)3 solid solutions for Na-Ion batteries10.1002/celc.201500455 ↗