Influence of solvents on species crossover and capacity decay in non-aqueous vanadium redox flow batteries: Characterization of acetonitrile and 1, 3 dioxolane solvent mixture
Source abstract
Abstract
Abstract The importance of the choice of solvent in a non-aqueous redox flow battery (NARFB) cannot be overemphasized. Several studies demonstrated the influence of the solvent on electrolyte performance in terms of reaction rates, energy/power densities, and efficiencies. In this work, we investigate capacity decay as a direct consequence of varying reactant crossover rates through membranes in different solvent environments. Specifically, we demonstrate the superiority of an 84/16 vol% acetonitrile/1,3 dioxolane solvent mixture over pure acetonitrile in terms of energy efficiency (up to 89%) and capacity retention for vanadium NARFBs - while incorporating a Nafion 115 membrane. The permeability of Nafion to the vanadium acetylacetonate active species is an order of magnitude lower when pure acetonitrile is replaced by the solvent mixture. A method to estimate relative membrane permeability is formulated from numerical analysis of self-discharge experimental data. Furthermore, tests on a modified Nafion/SiO2 membrane, which generally offered low species permeability, also show that different solvents alter membrane permeability. Elemental and morphological analyses of cycled Nafion and NafionSi membranes in different solvent environments indicate that different crossover rates induced by the choice of solvent during cycling are due to changes in the membrane microstructure, intrinsic permeability, swelling rates, and chemical stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Pathways to low-cost electrochemical energy storage: a comparison of aqueous and nonaqueous flow batteries10.1039/C4EE02158D ↗
2. Development of the all-vanadium redox flow battery for energy storage: a review of technological, financial and policy aspects10.1002/er.1863 ↗
3. Redox flow batteries: a review10.1007/s10800-011-0348-2 ↗
4. A review of current developments in non-aqueous redox flow batteries: characterization of their membranes for design perspective10.1039/c3ra00115f ↗
5. Progress in flow battery research and development10.1149/1.3599565 ↗
6. Metal acetylacetonate complexes for high energy density non-aqueous redox flow batteries10.1039/C4TA06622G ↗
7. Nonaqueous redox-flow batteries: features, challenges, and prospects10.1016/j.coche.2015.04.001 ↗
8. Izutsu · 2009
9. A rechargeable redox battery utilizing ruthenium complexes with non-aqueous organic electrolyte10.1007/BF01016050 ↗
10. Prospects of applying ionic liquids and deep eutectic solvents for renewable energy storage by means of redox flow batteries10.1016/j.rser.2013.10.004 ↗
11. Investigation of ammonium-and phosphonium-based deep eutectic solvents as electrolytes for a non-aqueous all-vanadium redox cell10.1149/2.0261605jes ↗
12. Studies on metal complexes as active materials in redox-flow battery using ionic liquids as electrolyte: cyclic voltammetry of betainium bis (Trifluoromethylsulfonyl) imide solution dissolving Na [Fe III (edta)(H 2 O)] as an anode active material10.5796/electrochemistry.83.730 ↗
13. Electrode kinetics of the redox reaction of Tris(2,2′-bipyridine)nickel complexes in an ionic liquid
14. Room temperature ionic liquids and their mixtures—a review
15. Tetrabutylammonium hexafluorophosphate and 1-ethyl-3-methyl imidazolium hexafluorophosphate ionic liquids as supporting electrolytes for non-aqueous vanadium redox flow batteries10.1016/j.jpowsour.2011.10.136 ↗
16. Increasing the energy density of the non-aqueous vanadium redox flow battery with the acetonitrile-1,3-dioxolane–dimethyl sulfoxide solvent mixture10.1016/j.jpowsour.2014.04.141 ↗
17. 1,3-Dioxolane, tetrahydrofuran, acetylacetone and dimethyl sulfoxide as solvents for non-aqueous vanadium acetylacetonate redox-flow-batteries10.1016/j.electacta.2013.09.055 ↗
18. Systematic selection of solvent mixtures for non-aqueous redox flow batteries – vanadium acetylacetonate as a model system10.1016/j.electacta.2016.12.014 ↗
19. Effect of casting solvent and annealing temperature on recast Nafion membranes for vanadium redox flow battery10.1016/j.memsci.2016.09.014 ↗
20. Degradation of all-vanadium redox flow batteries (VRFB) investigated by electrochemical impedance and X-ray photoelectron spectroscopy: Part 2 electrochemical degradation10.1016/j.jpowsour.2016.06.040 ↗
21. Detection of capacity imbalance in vanadium electrolyte and its electrochemical regeneration for all-vanadium redox-flow batteries10.1016/j.jpowsour.2015.10.021 ↗
22. Membrane evaluation for vanadium flow batteries in a temperature range of −20–50 °C10.1016/j.memsci.2016.09.012 ↗
23. Reducing capacity fade in vanadium redox flow batteries by altering charging and discharging currents10.1016/j.jpowsour.2013.08.023 ↗
24. Performance of a non-aqueous vanadium acetylacetonate prototype redox flow battery: examination of separators and capacity decay10.1149/2.0471503jes ↗
25. Surface-modified porous membranes with electrospun Nafion/PVA fibres for non-aqueous redox flow battery10.1016/j.memsci.2016.04.068 ↗
26. Nafion/SiO2 hybrid membrane for vanadium redox flow battery10.1016/j.jpowsour.2007.01.069 ↗
27. A recast Nafion/graphene oxide composite membrane for advanced vanadium redox flow batteries10.1039/C5RA24317C ↗
28. Haryadi · 2016 · 020024
29. Durable and efficient PTFE sandwiched SPEEK membrane for vanadium flow batteries10.1021/acsami.6b07782 ↗
30. Influence of membrane structure on the operating current densities of non-aqueous redox flow batteries: organic–inorganic composite membranes based on a semi-interpenetrating polymer network10.1016/j.jpowsour.2015.07.045 ↗
31. Performance of a vanadium redox flow battery with a VANADion membrane10.1016/j.apenergy.2016.08.001 ↗
32. Hybrid membranes with low permeability for vanadium redox flow batteries using in situ sol-gel process10.1007/s11814-015-0077-z ↗
33. Non-aqueous vanadium acetylacetonate electrolyte for redox flow batteries10.1016/j.elecom.2009.10.006 ↗
34. Counterion motions and thermal ordering effects in perfluorosulfonate ionomers probed by solid-state NMR10.1016/j.polymer.2009.10.016 ↗
35. Binary electrolyte based on tetra (ethylene glycol) dimethyl ether and 1, 3-dioxolane for lithium–sulfur battery10.1016/S0378-7753(02)00418-4 ↗
36. Wypych · 2008
37. R. Stenutz, Hansen solubility parameters, (n.d.). http://www.stenutz.eu/chem/(accessed 04 November 2015).
38. Empirical parameters of solvent polarity
39. Shinkle · 2013
40. Vibrational energy redistribution in polyatomic Liquids: ultrafast IR−Raman spectroscopy of acetonitrile10.1021/jp9822743 ↗
41. Observed bands in Raman and infrared spectra of 1,3-dioxolane and their assignments10.1016/j.vibspec.2012.11.007 ↗
42. Mechanical properties of Nafion and titania/Nafion composite membranes for polymer electrolyte membrane fuel cells10.1002/polb.20857 ↗
43. Research Solutions & Resources, Calculator for Capacitance from CPE parameters., (n.d.). http://www.consultrsr.net/resources/eis/cpecalc.htm (accessed 27 October 2016).
44. Determination of effective capacitance and film thickness from constant-phase-element parameters
45. Pore-filled anion-exchange membranes for non-aqueous redox flow batteries with dual-metal-complex redox shuttles10.1016/j.memsci.2013.11.051 ↗