Performance enhancement of polymer electrolyte fuel cells by combining liquid removal mechanisms of a gas diffusion layer with wettability distribution and a gas channel with microgrooves
Source abstract
Abstract
Abstract Although polymer electrolyte fuel cells (PEFCs) are commercially available, there are still many problems that need to be addressed to improve their performance and increase their usage. At a high current density, generated water accumulates in the gas diffusion layer and in the gas channels of the cathode. This excess water obstructs oxygen transport, and as a result, cell performance is greatly reduced. To improve the cell performance, the effective removal of the generated water and the promotion of oxygen diffusion in the gas diffusion layer (GDL) are necessary. In this study, two functions proposed in previous reports were combined and applied to a PEFC: a hybrid GDL to form an oxygen diffusion path using a wettability distribution and a gas separator with microgrooves to enhance liquid removal. For a PEFC with a hybrid GDL and a gas separator with microgrooves, the concentration overvoltage of the PEFC was reduced, and the current density limit and maximum power density were increased compared with a conventional PEFC. Moreover, the stability of the cell voltage was markedly improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Influence of the hydrophobic material content in the gas diffusion electrodes on the performance of a PEM fuel cell10.1016/S0360-3199(02)00143-X ↗
2. Effect of PTFE contents in the gas diffusion media on the performance of PEMFC10.1016/j.jpowsour.2003.12.037 ↗
3. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell10.1016/j.electacta.2004.04.009 ↗
4. Effect of material properties on evaporative water removal from polymer electrolyte fuel cell diffusion media10.1016/j.jpowsour.2010.03.094 ↗
5. Improvement of water management by a microporous sublayer for PEM fuel cells10.1016/S0378-7753(02)00058-7 ↗
6. Effect of carbon loading in microporous layer on PEM fuel cell performance10.1016/j.jpowsour.2006.09.020 ↗
7. Atiyeh · J. Power Sources · 2007 · 170 · 11110.1016/j.jpowsour.2007.04.016 ↗
8. Effect of PTFE content in microporous layer on water management in PEM fuel cells10.1016/j.jpowsour.2007.11.055 ↗
9. Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells10.1016/j.jpowsour.2009.10.089 ↗
10. Effect of micro-layer PTFE on the performance of PEM fuel cell electrodes10.1016/j.ijhydene.2011.03.037 ↗
11. Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell10.1016/j.jpowsour.2007.11.080 ↗
12. Laser perforated fuel cell diffusion media. Part I: related changes in performance and water content10.1016/j.jpowsour.2011.01.014 ↗
13. Novel hydrophilic and hydrophobic double microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells under both low and high humidity10.1016/j.jpowsour.2013.01.150 ↗
14. Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions10.1016/j.jpowsour.2013.10.066 ↗
15. Characteristics of oxygen diffusivity and water distribution by X-ray radiography in microporous media in alternate porous layers of different wettability for moisture control in gas diffusion layer of PEFC10.1016/j.ijhydene.2011.04.152 ↗
16. Improvement of oxygen diffusion characteristic in gas diffusion layer with planar-distributed wettability for polymer electrolyte fuel cell10.1016/j.jpowsour.2014.05.151 ↗
17. Method of measuring oxygen diffusivity in microporous media10.1016/j.ijheatmasstransfer.2009.02.032 ↗
18. Precise measurement of effective oxygen diffusivity for microporous media containing moisture by review of galvanic cell oxygen absorber configuration10.1016/j.ijheatmasstransfer.2014.05.005 ↗
19. A gas distributor design for proton-exchange-membrane fuel cells10.1149/1.1836666 ↗
20. Effect of direct liquid water injection and interdigitated flow field on the performance of proton exchange membrane fuel cells10.1016/S0013-4686(98)00139-X ↗
21. Study of water-flooding behaviour in cathode channel of a transparent proton-exchange membrane fuel cell10.1016/j.jpowsour.2006.01.002 ↗
22. Characterization of the operational parameters of a H2/air micro PEMFC with different flow fields by impedance spectroscopy10.1016/j.jpowsour.2006.06.070 ↗
23. Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells10.1016/j.jpowsour.2006.01.031 ↗
24. The impact of channel path length on PEMFC flow-field design10.1016/j.jpowsour.2006.01.099 ↗
25. A flow channel design procedure for PEM fuel cells with effective water removal10.1016/j.jpowsour.2006.10.015 ↗
26. A new flow field design for polymer electrolyte-based fuel cells10.1016/j.elecom.2006.10.031 ↗
27. Effects of serpentine flow field with outlet channel contraction on cell performance of proton exchange membrane fuel cells10.1016/j.jpowsour.2007.12.017 ↗
28. An experimental study on the enhancement of the water balance, electrochemical reaction and power density of the polymer electrolyte fuel cell by under-rib convection10.1016/j.elecom.2011.08.015 ↗
29. Passive water removal in fuel cells by capillary droplet actuation10.1016/j.sna.2007.06.037 ↗
30. Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell10.1016/j.electacta.2009.11.095 ↗
31. Effective removal and transport of water in a PEM fuel cell flow channel having a hydrophilic plate10.1016/j.apenergy.2013.06.053 ↗
32. Proposal and examination of method of water removal from gas diffusion layer by applying slanted microgrooves inside gas channel in separator to improve polymer electrolyte fuel cell performance10.1016/j.jpowsour.2015.01.050 ↗
33. Water control by employing microgrooves inside gas channel for performance improvement in polymer electrolyte fuel cells10.1016/j.ijhydene.2015.04.113 ↗
34. The effects of compression and gas diffusion layers on the performance of a PEM fuel cell10.1016/S0378-7753(99)00298-0 ↗
35. Effect of clamping pressure on the performance of a PEM fuel cell10.1016/j.jpowsour.2007.01.015 ↗