Highly stable microtubular solid oxide fuel cells based on integrated electrolyte/anode hollow fibers
Source abstract
Abstract
Abstract The asymmetric YSZ hollow fibers have been prepared by a phase-inversion method, based on which, the integrated electrolyte/anode hollow fibers are fabricated via a vacuum-assisted impregnation of nickel nitrate. The content of NiO in the integrated hollow fibers enhances linearly from 0 to 42 wt.% with the impregnation cycles from 0 to 10. The porosity of the integrated electrolyte/anode hollow fibers decreases from 43% to 31% with the repeated impregnation and calcination of Ni catalyst. Its conductivity reaches up to 728 S cm −1 after 10 cycles of impregnation. And the mechanical strength of the integrated hollow fiber enhances from 128 to 156 MPa due to the increased NiO content. Based on the integrated electrolyte/anode hollow fibers, the prepared microtubular solid oxide fuel cells (MT-SOFCs) deliver a peak power density of 562 mW cm −2 after ten cycles of Ni impregnation. The cell stability has been verified in 40 thermal cycles with a steady OCV of 1.1 V and stable power density around 560 mW cm −2 operated at 800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Progress in microtubular solid oxide fuel cells10.1111/j.1744-7402.2008.02350.x ↗
2. Review of the micro-tubular solid oxide fuel cell (Part II: cell design issues and research activities)10.1016/j.jpowsour.2013.03.191 ↗
3. Review of the micro-tubular solid oxide fuel cell10.1016/j.jpowsour.2009.02.085 ↗
4. Single-step fabrication and characterisations of triple-layer ceramic hollow fibres for micro-tubular solid oxide fuel cells (SOFCs)10.1016/j.memsci.2013.08.009 ↗
5. High-performance, anode-supported, microtubular SOFC prepared from single-step-fabricated, dual-layer hollow fibers10.1002/adma.201100194 ↗
6. Micro-tubular solid oxide fuel cells with graded anodes fabricated with a phase inversion method10.1016/j.jpowsour.2010.08.074 ↗
7. One-step sintering process of gadolinia-doped ceria interlayer – scandia-stabilized zirconia electrolyte for anode supported microtubular solid oxide fuel cells10.1016/j.jpowsour.2011.10.046 ↗
8. Improved ceramics leading to microtubular solid oxide fuel cells (mSOFCs)10.1016/j.ijhydene.2012.08.094 ↗
9. Microstructure tailoring of YSZ/Ni-YSZ dual-layer hollow fibers for micro-tubular solid oxide fuel cell application10.1016/j.ijhydene.2013.03.088 ↗
10. Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique10.1016/j.jpowsour.2013.03.025 ↗
11. Microstructure and performance investigation of a solid oxide fuel cells based on highly asymmetric YSZ microtubular electrolytes10.1021/ie1002558 ↗
12. Preparation of microtubular solid oxide fuel cells based on highly asymmetric structured electrolyte hollow fibers10.1007/s11426-010-4220-8 ↗
13. Highly asymmetric yttria stabilized zirconia hollow fibre membranes10.1016/j.jallcom.2008.09.079 ↗
14. Effect of the co-spun anode functional layer on the performance of the direct-methane microtubular solid oxide fuel cells10.1016/j.jpowsour.2013.08.133 ↗
15. Intermediate temperature micro-tubular SOFCs with enhanced performance and thermal stability10.1016/j.elecom.2013.06.015 ↗
16. Effects on microstructure of NiO–YSZ anode support fabricated by phase-inversion method10.1016/j.memsci.2010.07.044 ↗
17. Mixed conducting ceramic hollow-fiber membranes for air separation10.1002/aic.10475 ↗
18. Microstructure tailoring of the nickel–yttria stabilised zirconia (Ni–YSZ) cermet hollow fibres10.1016/j.ceramint.2012.05.002 ↗
19. The investigation of active Ni/YSZ interlayer for Cu-based direct-methane solid oxide fuel cells10.1016/j.apenergy.2012.01.003 ↗
20. Single-step fabrication and characterisations of electrolyte/anode dual-layer hollow fibres for micro-tubular solid oxide fuel cells10.1016/j.memsci.2010.01.050 ↗
21. Pore formation mechanism of membranes from phase inversion process10.1016/0011-9164(95)00076-3 ↗
22. Oxygen permeation behavior of La0.6Sr0.4Co0.8Fe0.2O3 hollow fibre membranes with highly concentrated CO2 exposure10.1016/j.memsci.2011.10.032 ↗
23. Microstructures in phase-inversion membranes. Part 1. Formation of macrovoids10.1016/0376-7388(92)80134-6 ↗
24. Microstructures in phase inversion membranes. Part 2. The role of a polymeric additive10.1016/0376-7388(92)80135-7 ↗
25. Fabrication and characterization of Ce0.8Sm0.2O1.9 microtubular dual-structured electrolyte membranes for application in solid oxide fuel cell technology10.1111/j.1551-2916.2009.03267.x ↗
26. Stability and robustness of metal-supported SOFCs10.1016/j.jpowsour.2007.09.032 ↗
27. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
28. Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal cycling based on nano-computed tomography10.1016/j.jpowsour.2011.08.083 ↗
29. Ceramic fuel cells10.1111/j.1151-2916.1993.tb03645.x ↗
30. Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review10.1016/j.rser.2014.04.043 ↗
31. Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction10.1016/j.ssi.2004.02.026 ↗
32. Ba(Zr0.1Ce0.7Y0.2)O3–δ as an Electrolyte for Low-Temperature Solid-Oxide Fuel Cells10.1002/adma.200601366 ↗
33. A reduced temperature solid oxide fuel cell with nanostructured anodes10.1039/c1ee01982a ↗
34. Effect of nickel impregnated hollow fiber anode for microtubular solid oxide fuel cells10.1016/j.jpowsour.2014.02.059 ↗
35. Microchanneled anode supports of solid oxide fuel cells10.1016/j.elecom.2014.02.013 ↗
36. Microstructural refinement of Ni/Ce0.8Gd0.2O2−δ anodes for low-temperature solid oxide fuel cell by wet infiltration loading of PdCl210.1016/j.ceramint.2014.04.075 ↗
37. A phase inversion/sintering process to fabricate nickel/yttria-stabilized zirconia hollow fibers as the anode support for micro-tubular solid oxide fuel cells10.1016/j.jpowsour.2008.05.006 ↗
38. Fabrication, electrochemical characterization and thermal cycling of anode supported microtubular solid oxide fuel cells10.1016/j.jpowsour.2008.12.107 ↗
39. Characterisation of electrical performance of anode supported micro-tubular solid oxide fuel cell with methane fuel10.1016/j.jpowsour.2008.03.019 ↗
40. Fabrication and characterization of an anode-supported hollow fiber SOFC10.1016/j.jpowsour.2008.10.069 ↗
41. The effect of porous composite electrode structure on solid oxide fuel cell performance: I. theoretical analysis10.1149/1.1837360 ↗
42. Performance of microtubular SOFCs with infiltrated electrodes under thermal cycling10.1016/j.ijhydene.2012.10.098 ↗
43. Redox-cycling studies of anode-supported microtubular solid oxide fuel cells10.1016/j.ijhydene.2011.10.026 ↗
44. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges10.1016/j.ijhydene.2011.09.067 ↗
45. Ni infiltration as a possible solution to the redox problem of SOFC anodes10.1149/1.2959078 ↗