Expandable-graphite-derived graphene for next-generation battery chemistries
Source abstract
Abstract
Abstract Lithium–sulfur and lithium–air batteries offer theoretical energy densities an order of magnitude higher than that of current lithium-ion batteries and are considered as promising candidates as the next-generation battery chemistries. For an efficient use of these new battery chemistries, careful selection of suitable electrode materials/structures is critical. Graphene, a unique two-dimensional nanomaterial, with its superior electronic conductivity, mechanical strength, and flexibility has been successfully applied in battery studies. Graphene, even with imperfect layers, will be of great interest to battery industrial applications if the manufacturing cost is reduced. Herein, we demonstrate the application of low-cost graphene sponge/sheets derived from expandable graphite in both lithium–sulfur and hybrid lithium–air batteries, respectively, as a cathode conductive matrix to accommodate the soluble polysulfides and as a catalyst for the oxygen reduction reaction. High utilization of active materials and good cycling stability are realized in lithium–sulfur and hybrid lithium–air batteries by employing this low-cost material, demonstrating its promise for use in next-generation battery chemistries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Materials challenges and opportunities of lithium ion batteries10.1021/jz1015422 ↗
3. Thermodynamic analysis on energy densities of batteries10.1039/c0ee00777c ↗
4. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
5. Advances in Li–S batteries10.1039/b925751a ↗
6. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
7. Recent progress and remaining challenges in sulfur-based lithium secondary batteries–a review10.1039/c3cc46131a ↗
8. Manipulating surface reactions in lithium-sulphur batteries using hybrid anode structures10.1038/ncomms4015 ↗
9. A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries10.1038/ncomms2513 ↗
10. Hydroxylated graphene–sulfur nanocomposites for high-rate lithium–sulfur batteries10.1002/aenm.201201080 ↗
11. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells10.1021/ja206955k ↗
12. Graphene-enveloped sulfur in a one pot reaction: a cathode with good coulombic efficiency and high practical sulfur content10.1039/C2CC16726C ↗
13. A novel nano-sulfur/polypyrrole/graphene nanocomposite cathode with a dual-layered structure for lithium rechargeable batteries10.1016/j.jpowsour.2013.05.005 ↗
14. Graphene-wrapped sulfur particles as a rechargeable lithium–sulfur battery cathode material with high capacity and cycling stability10.1021/nl200658a ↗
15. Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithiumesulfur battery10.1016/j.jpowsour.2013.05.063 ↗
16. Porous hollow carbon@sulfur composites for high-power lithium–sulfur batteries10.1002/anie.201100637 ↗
17. Highly dispersed sulfur in a porous aromatic framework as a cathode for lithium–sulfur batteries10.1039/c3cc41518j ↗
18. Liquid electrolyte lithium/sulfur battery: fundamental chemistry, problems, and solutions10.1016/j.jpowsour.2012.12.102 ↗
19. Exceptional electrochemical performance of rechargeable Li–S batteries with a polysulfide-containing electrolyte10.1039/c3ra23070h ↗
20. A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage10.1039/c3ee00072a ↗
21. O- and N-doped carbon nanowebs as metal-free catalysts for hybrid Li-air batteries10.1002/aenm.201301795 ↗
22. Graphene–Co3O4 nanocomposite as an efficient bifunctional catalyst for lithium–air batteries10.1039/C4TA00802B ↗
23. Hybrid Li-air battery cathodes with sparse carbon nanotube arrays directly grown on carbon fiber papers10.1039/c3ee41116h ↗
24. Decoupled bifunctional air electrodes for high-performance hybrid lithium-air batteries10.1016/j.nanoen.2014.07.002 ↗
25. Advanced hybrid Li-air batteries with high-performance mesoporous nanocatalysts10.1039/C4EE00814F ↗
26. The role of graphene for electrochemical energy storage
27. Graphene for advanced Li/S and Li/air batteries10.1039/C3TA12522J ↗
28. Graphene nanosheets as cathode catalysts for lithium-air batteries with an enhanced electrochemical performance10.1016/j.carbon.2011.09.040 ↗
29. Chemically derived, ultrasmooth graphene nanoribbon semiconductors10.1126/science.1150878 ↗
30. Facile fabrication of high quality graphene from expandable graphite: simultaneous exfoliation and reduction10.1039/c0cc00383b ↗
31. Thinning of large-area graphene film from multilayer to bilayer with a low-power CO2 laser10.1088/0957-4484/24/27/275302 ↗
32. High-yield, large-scale production of few-layer graphene flakes within seconds: using chlorosulfonic acid and H2O2 as exfoliating agents10.1039/c2jm16741g ↗
33. Jenkins · 2001
34. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
35. Investigations of Lithium–sulfur Batteries using Electrochemical Impedance Spectroscopy10.1016/j.electacta.2013.02.101 ↗
36. Rock-salt-type lithium metal sulphides as novel positive-electrode materials10.1038/srep04883 ↗
37. Rechargeable lithium sulfur battery: I. structural change of sulfur cathode during discharge and charge10.1149/1.1571532 ↗
38. On the surface chemical aspects of very high energy density, rechargeable Li-sulfur batteries10.1149/1.3148721 ↗
39. Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium–sulfur batteries10.1016/j.jpowsour.2013.08.041 ↗
40. Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries10.1038/ncomms5759 ↗
41. Stabilized lithium–metal surface in a polysulfide-rich environment of lithium–sulfur batteries10.1021/jz501352e ↗
42. Study on the reduction species of sulfur by alkali metals in nonaqueous solvents10.1016/S0013-4686(96)00281-2 ↗
43. Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification10.1021/ac2032244 ↗
44. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
45. Nitrogen-doped graphene as efficient metal-free electrocatalyst for oxygen reduction in fuel cells10.1021/nn901850u ↗
46. Mechanisms of oxygen reduction reaction on nitrogen-doped graphene for fuel cells10.1021/jp201991j ↗
47. Li-air rechargeable battery based on metal-free graphene nanosheet catalysts10.1021/nn200084u ↗
48. Li L., Liu S., Manthiram A., Co3O4 nanocrystals coupled with O- and N-doped carbon nanoweb as a synergistic catalyst for hybrid Li-air batteries, Nano Energy, http://dx.doi.org/10.1016/j.nanoen.2014.10.036.10.1016/j.nanoen.2014.10.036 ↗
49. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
50. Toward a lithium–“air” battery: The effect of CO2 on the chemistry of a lithium–oxygen cell10.1021/ja4016765 ↗