Constructing three-dimensional conductive network in composite bipolar plates by sacrificial materials for improvement of proton exchange membrane fuel cell performance
Source abstract
Abstract
The poor conductivity of traditional polymer-based composite bipolar plates (BP) greatly hinders its wide application in proton exchange membrane fuel cell (PEMFC). Three-dimensional conductive network in composite BP can significantly improve its performance. In this work, we propose a simple strategy to prepare an epoxy resin-based composite BP by sacrificial materials, forming a three-dimensional graphite structure (3D-graphite). Specifically, graphite and NH 4HCO 3 are mixed and pressed at room temperature, and heated at 90 °C to obtain 3D-graphite skeleton. Then, the 3D-graphite skeleton is impregnated by epoxy resin to obtain 3D-graphite/epoxy composites. The construction of 3D-graphite conductive network can greatly improve the electrical conductivity of composite BP. The highest in-plane conductivity is 212.64 S/cm, and area specific resistance is 4.50 mΩ cm 2 . The thermal conductivity can reach 16.01 W/mK, superior to the randomly distributed graphite/epoxy composite BP. Compared with the traditional mixed graphite/epoxy composite BP, 3D-graphite/epoxy composite BP can significantly improve the performance of PEMFC and its maximum power density (853.42 mW/cm 2 ) is increased by 317.52%. In addition, 3D-graphite/epoxy composite BP has good corrosion resistance and hydrophobicity. This work develops a new paradigm for preparing highly performance polymer-based composite bipolar plates for PEMFC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Review of hydrogen economy in Malaysia and its way forward10.1016/j.ijhydene.2019.01.077 ↗
2. Production, storage, fuel stations of hydrogen and its utilization in automotive applications-a review10.1016/j.ijhydene.2017.08.063 ↗
3. Fuel cell application in the automotive industry and future perspective10.1016/j.energy.2020.118955 ↗
4. Futuristic applications of hydrogen in energy, biorefining, aerospace, pharmaceuticals and metallurgy10.1016/j.ijhydene.2021.01.014 ↗
5. A comprehensive comparison of state-of-the-art manufacturing methods for fuel cell bipolar plates including anticipated future industry trends10.1016/j.jmapro.2020.10.041 ↗
6. Emerging technologies by hydrogen: a review10.1016/j.ijhydene.2020.05.021 ↗
7. A review of proton exchange membrane fuel cell water management: membrane electrode assembly10.1016/j.jpowsour.2021.230723 ↗
8. Comparison of performance degradation of high temperature PEM fuel cells with different bipolar plates10.1016/j.energy.2019.07.166 ↗
9. Proton exchange membrane fuel cell subzero start-up with hydrogen catalytic reaction assistance10.1016/j.jpowsour.2019.02.092 ↗
10. A review of polymer electrolyte membrane fuel cell stack testing10.1016/j.jpowsour.2010.07.072 ↗
11. Polymer electrolyte membrane fuel cell and hydrogen station networks for automobiles: status, technology, and perspectives10.1016/j.adapen.2021.100011 ↗
12. Mechanisms and effects of mechanical compression and dimensional change in polymer electrolyte fuel cells – a review10.1016/j.jpowsour.2015.02.111 ↗
13. Importance and applications of DOE/optimization methods in PEM fuel cells: a review10.1002/er.4815 ↗
14. Bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2005.04.016 ↗
15. High performance polyvinylidene fluoride/graphite/multi-walled carbon nanotubes composite bipolar plate for PEMFC with segregated conductive networks10.1016/j.ijhydene.2021.05.081 ↗
16. Synergistic enrichment of electrically conductive polypropylene-graphite composites for fuel cell bipolar plates
17. An overview of bipolar plates in proton exchange membrane fuel cells10.1063/5.0031447 ↗
18. Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell10.1016/j.ijhydene.2019.07.231 ↗
19. Bipolar plates made of carbon fabric/phenolic composite reinforced with carbon black for PEMFC10.1016/j.compstruct.2012.09.017 ↗
20. A review of thermoplastic composites for bipolar plate applications10.1002/er.3005 ↗
21. Challenges and perspectives of metal-based proton exchange membrane's bipolar plates: exploring durability and longevity10.1002/ente.202000007 ↗
22. Ultrafine amorphous Co–Fe–B catalysts for the hydrolysis of NaBH4 solution to generate hydrogen for PEMFC10.1002/fuce.200900091 ↗
23. Corrosion and interfacial contact resistance of nanocrystalline β-Nb2N coating on 430 FSS bipolar plates in the simulated PEMFC anode environment10.1016/j.ijhydene.2021.06.207 ↗
24. Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates10.1016/j.ijhydene.2014.12.085 ↗
25. Highly conductive and strong graphite-phenolic resin composite for bipolar plate Applications10.1021/acs.energyfuels.7b02678 ↗
26. Carbon-based materials for bipolar plates for low-temperatures PEM fuel cells — a review
27. A competitive design and material consideration for fabrication of polymer electrolyte membrane fuel cell bipolar plates
28. Bipolar plate design and fabrication using graphite reinforced composite laminate for proton exchange membrane fuel cells10.1016/j.ijhydene.2020.08.030 ↗
29. Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: a review of the main challenges to improve electrical performance10.1016/j.jpowsour.2010.12.041 ↗
30. A pre-feasibility experimental study of using surface-enhanced flake graphite to build up PEFC bipolar plates10.1016/j.egypro.2019.01.358 ↗
31. The effect of mold pressing pressure and composition on properties of nanocomposite bipolar plate for proton exchange membrane fuel cell10.1016/j.matdes.2011.02.059 ↗
32. Poly(phenylene sulfide) graphite composites with graphite nanoplatelets as a secondary filler for bipolar plates in fuel cell applications10.1007/s13233-020-8140-y ↗
33. Fluorinated ethylene–propylene/graphite composites reinforced with silicon carbide for the bipolar plates of fuel cells10.1016/j.ijhydene.2021.11.028 ↗
34. Highly filled graphite/graphene/carbon nanotube in polybenzoxazine composites for bipolar plate in PEMFC10.1016/j.ijhydene.2020.08.006 ↗
35. Fabrication of multi-filler thermoset-based composite bipolar plates for PEMFCs applications: molding defects and properties characterizations10.1016/j.ijhydene.2020.03.105 ↗
36. Efficient composite bipolar plate reinforced with carbon fiber and graphene for proton exchange membrane fuel cell10.1016/j.ijhydene.2012.11.075 ↗
37. Properties of epoxy/carbon black/graphite composites for bipolar plate in polymer electrolyte membrane fuel cell10.4028/www.scientific.net/AMR.911.8 ↗
38. Manufacturing and characterization of bipolar fuel cell plate with textile reinforced polymer composites10.1016/j.matdes.2014.10.044 ↗
39. Investigation of electrical-mechanical performance of epoxy-based nanocomposites filled with hybrid electrically conductive fillers10.1088/2053-1591/ab44d6 ↗
40. Development of graphite-filled polymer blends for application in bipolar plates10.1002/pc.25625 ↗
41. Cost and performance prospects for composite bipolar plates in fuel cells and redox flow batteries10.1016/j.jpowsour.2015.11.052 ↗
42. Enhanced performance and durability of composite bipolar plate with surface modification of cactus-like carbon nanofibers10.1016/j.jpowsour.2020.228903 ↗
43. Interfacial contact resistance in polymer electrolyte membrane fuel cells: recent developments and challenges10.1016/j.rser.2019.109351 ↗
44. Characteristics of expanded graphite filled conductive polymer composites for PEM fuel cell bipolar plates10.1163/156855108X345261 ↗
45. Development of ultralight and thin bipolar plates using epoxy-carbon fiber prepregs and graphite composites10.1016/j.ijhydene.2016.05.027 ↗
46. Three-dimensional graphite filled poly(vinylidene fluoride) composites with enhanced strength and thermal conductivity10.4028/www.scientific.net/KEM.842.63 ↗
47. 3D boron nitride foam filled epoxy composites with significantly enhanced thermal conductivity by a facial and scalable approach10.1016/j.cej.2020.125447 ↗
48. Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine10.1016/S0040-6031(98)00463-8 ↗
49. Experimental study on performance evaluation of PEM fuel cell by coating bipolar plate with materials having different contact angle10.1016/j.fuel.2019.05.110 ↗
50. Influence of surface roughness and hydrophobicity of bipolar plates on PEM performance10.1016/j.surfcoat.2020.125676 ↗
51. Corrosion of metal bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2010.01.059 ↗
52. Evaluating the effect of metal bipolar plate coating on the performance of proton exchange membrane fuel cells10.3390/en11113203 ↗
53. Experimental fuel cell performance analysis under different operating conditions and bipolar plate designs10.1016/j.ijhydene.2010.05.056 ↗
54. Investigation on the corrosion resistance of carbon black–graphite-poly(vinylidene fluoride) composite bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.06.131 ↗
55. Corrosion and thermal stability of multi-walled carbon nanotube–graphite–acrylonitrile–butadiene–styrene composite bipolar plates for polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2012.08.052 ↗
56. A comparative study of corrosion resistance evaluation of bipolar plate materials for proton exchange membrane fuel cell10.1016/j.etran.2021.100139 ↗