journal article·2022-09

Li6PS5Cl-based composite electrolyte reinforced with high-strength polyester fibers for all-solid-state lithium batteries

Si-Eun Lee, Hui-Tae Sim, Young-Jun Lee, Seung-Bo Hong, Kyung Yoon Chung, Hun-Gi Jung, Dong-Won Kim

Publisher page

Abstract

All-solid-state lithium batteries (ASSLBs) with sulfide electrolytes attract considerable attention owing to their enhanced safety and high energy density compared to lithium-ion batteries employing liquid electrolytes. However, the conventional cold pressing method for preparing solid electrolyte pellets causes the formation of large pores in the electrolyte. Alternatively, hot pressing the pellets is an effective method for densifying the solid electrolyte and enhancing its ionic conductivity. However, hot-pressed sulfide electrolytes are brittle and difficult to handle, and must be thick to maintain their dimensional stability without cracking during the hot-pressing process. Herein, we prepare a thin, dense Li 6PS 5Cl (argyrodite)-based composite electrolyte reinforced with high-strength polyester fibers. A composite electrolyte reinforced with 5.0 wt% fiber exhibits high ionic conductivity of 2.9 ⅹ 10 −3 S cm −1 and much higher ionic conductance than pristine Li 6PS 5Cl pellets. The interfacial contact between the composite electrolyte and composite cathode is also enhanced by additional hot pressing. The ASSLB (Li–In/LiNi 0.7Co 0.1Mn 0.2O 2) employing the composite electrolyte initially delivers a high discharge capacity of 185.7 mAh g −1, corresponding to an areal capacity of 2.0 mAh cm −2, and exhibits stable cycling performance with a capacity retention of 71% after 300 cycles at 0.2C and 25 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
2. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries
3. Recent advances in organic-inorganic composite solid electrolytes for all-solid-state lithium batteries10.1016/j.ensm.2020.09.016 ↗
4. A lithium superionic conductor10.1038/nmat3066 ↗
5. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
6. Inducing high ionic conductivity in the lithium superionic argyrodites Li6+xP1-xGexS5I for all-solid-state batteries10.1021/jacs.8b10282 ↗
7. Influence of crystallinity of lithium thiophosphate solid electrolytes on the performance of solid-state batteries
8. Tailoring slurries using cosolvents and Li salt targeting practical all-solid-state batteries employing sulfide solid electrolytes10.1002/aenm.202003766 ↗
9. Boosting solid-state diffusivity and conductivity in lithium superionic argyrodites by halide substitution10.1002/anie.201814222 ↗
10. Research progress in Li-argyrodite-based solid-state electrolytes10.1039/D0TA08472G ↗
11. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes10.1038/s41560-020-0575-z ↗
12. Lithium superionic sulfide cathode for all-solid lithium-sulfur batteries10.1021/nn400391h ↗
13. A lithium sulfur battery with high power density10.1016/j.jpowsour.2014.04.106 ↗
14. Composite sulfur electrode prepared by high-temperature mechanical milling for use in an all-solid-state lithium-sulfur battery with a Li3.25Ge0.25P0.75S4 electrolyte10.1016/j.electacta.2017.09.156 ↗
15. All-solid-state batteries with slurry coated LiNi0.8Co0.1Mn0.1O2 composite cathode and Li6PS5Cl electrolyte: effect of binder content10.1016/j.jpowsour.2018.04.069 ↗
16. Sulfide-compatible conductive and adhesive glue-like interphase engineering for sheet-type all-solid-state battery
17. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
18. Capacity fade in solid-state batteries: interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes10.1021/acs.chemmater.7b00931 ↗
19. Simulation of the effect of contact area loss in all-solid-state Li-ion batteries10.1149/2.0481711jes ↗
20. Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries10.1016/j.jechem.2020.12.017 ↗
21. Crystallization process for superionic Li7P3S11 glass-ceramic electrolytes10.1111/j.1551-2916.2010.04335.x ↗
22. Hot pressed, fiber-reinforced (Li2S)70(P2S5)30 solid-state electrolyte separators for Li metal batteries10.1021/acsaem.9b00290 ↗
23. Flexible sulfide electrolyte thin membrane with ultrahigh ionic conductivity for all-solid-state lithium batteries10.1021/acs.nanolett.1c01344 ↗
24. Vectran™ high-performance fiber10.1080/00405009008658729 ↗
25. Properties of multi-layered polymer composites with Vectran™™ fiber reinforcement10.1016/j.compstruct.2020.113045 ↗
26. Composite cathode prepared by argyrodite precursor solution assisted by dispersant agents for bulk-type all-solid-state batteries10.1016/j.jpowsour.2018.06.011 ↗
27. Substitutional disorder: structure and ion dynamics of the argyrodites Li6PS5Cl, Li6PS5Br and Li6PS5I10.1039/C9CP00664H ↗
28. Structural evolution and degradation mechanism of Vectran™ fibers upon exposure to UV-radiation10.1016/j.polymdegradstab.2013.05.023 ↗
29. Thin and flexible solid electrolyte membranes with ultrahigh thermal stability derived from solution-processable Li argyrodites for All-Solid-State Li-ion batteries10.1021/acsenergylett.0c00251 ↗
30. Free-standing sulfide/polymer composite solid electrolyte membranes with high conductance for all-solid-state lithium batteries10.1016/j.ensm.2019.10.020 ↗
31. Mechanism of lithium metal penetration through inorganic solid electrolytes10.1002/aenm.201701003 ↗
32. Electrode morphology in all-solid-state lithium secondary batteries consisting of LiNi1/3Co1/3Mn1/3O2 and Li2S-P2S5 solid electrolytes10.1016/j.ssi.2015.09.010 ↗
33. Impact of cathode material particle size on the capacity of bulk-type All-solid-state batteries10.1021/acsenergylett.8b00275 ↗
34. All-solid-state lithium batteries: Li+-Conducting ionomer binder for dry-processed composite cathodes10.1021/acsenergylett.1c02756 ↗
35. Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach10.1016/j.ensm.2019.05.033 ↗
36. Morphology change in polytetrafluoroethylene (PTFE), porous membrane caused by heat treatment10.1002/pen.11210 ↗
37. Formation and structure of polytetrafluoroethylene fibrils10.1002/app.39630 ↗
38. Interfacial processes and influence of composite cathode microstructure controlling the performance of all-solid state lithium batteries10.1021/acsami.7b01137 ↗