journal article·2022-02Open access

Effect of water management in membrane and cathode catalyst layers on suppressing the performance hysteresis phenomenon in anion-exchange membrane fuel cells

Kanji Otsuji, Yuto Shirase, Takayuki Asakawa, Naoki Yokota, Katsuya Nagase, Weilin Xu, Ping Song, Shuanjin Wang, Donald A. Tryk, Katsuyoshi Kakinuma, Junji Inukai, Kenji Miyatake, Makoto Uchida

Abstract

Anion exchange membrane fuel cells (AEMFCs) are vulnerable to water management problems, since water is produced at the anode and consumed at the cathode. Previously we found severe voltage losses when increasing the current density in an AEMFC with a commercial Fe–N–C cathode catalyst. In the present work, we have clearly identified the problem as being related to water management and developed two approaches to alleviating the problem: by use of a thin hydrophilized membrane, the diffusivity of water at the surface was improved, and the severe I–V hysteresis was suppressed, despite the cell using an Fe–N–C cathode catalyst with a high water absorption rate. The voltage loss was also alleviated by the use of a recently developed Fe–N–C catalyst with higher hydrophobicity, which decreased the absorption of back-diffusing water into the catalyst layer and increased the amount of water supplied to the reaction sites These improvements have demonstrated that water transport is the main limitation for the previously reported hysteresis and provide strategies to achieve higher performance AEMFCs through proper water management and formation of water transport pathways.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. The chemical and structural nature of proton exchange membrane fuel cell properties10.1002/fuce.200400064 ↗
2. Anion exchange membranes for alkaline fuel cells: a review10.1016/j.memsci.2011.04.043 ↗
3. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
4. Unraveling mysteries of hydrogen electrooxidation in anion exchange membrane fuel cells10.1016/j.coelec.2018.11.013 ↗
5. Understanding how high-performance anion exchange membrane fuel cells were achieved: component, interfacial, and cell-level factors10.1016/j.coelec.2018.11.010 ↗
6. Perspective—the next decade of AEMFCs: near-term targets to accelerate applied R&D10.1149/1945-7111/ab8c88 ↗
7. Polymeric materials as anion-exchange membranes for alkaline fuel cells10.1016/j.progpolymsci.2011.04.004 ↗
8. Anion exchange membranes: current status and moving forward10.1002/polb.23395 ↗
9. Alkaline fuel cell technology - a review10.1016/j.ijhydene.2021.02.203 ↗
10. Anion exchange membranes' evolution toward high hydroxide ion conductivity and alkaline resiliency10.1021/acsaem.8b00387 ↗
11. Designing advanced alkaline polymer electrolytes for fuel cell applications10.1021/ar200201x ↗
12. Radiation-induced grafting of a butyl-spacer styrenic monomer onto ETFE: the synthesis of the most alkali stable radiation-grafted anion-exchange membrane to date10.1039/C7TA10222D ↗
13. Robust anion conductive polymers containing perfluoroalkylene and pendant ammonium groups for high performance fuel cells10.1039/C7TA09409D ↗
14. High hydroxide ion conductivity with enhanced alkaline stability of partially fluorinated and quaternized aromatic copolymers as anion exchange membranes10.1021/acs.macromol.7b00401 ↗
15. Partially fluorinated copolymers containing pendant piperidinium head groups as anion exchange membranes for alkaline fuel cells10.1002/pola.29360 ↗
16. Effect of crosslinking on the properties of partially fluorinated anion exchange membranes10.1039/C9RA07775H ↗
17. Achieving high-performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
18. Anion exchange polyelectrolytes for membranes and ionomers10.1016/j.progpolymsci.2020.101345 ↗
19. Progress of alkaline anion exchange membranes for fuel cells: the effects of micro-phase separation10.3389/fmats.2020.00004 ↗
20. Highly anion conductive polymers: how do hexafluoroisopropylidene groups affect membrane properties and alkaline fuel cell performance?10.1021/acsaem.9b01733 ↗
21. The importance of water transport in high conductivity and high-power alkaline fuel cells10.1149/2.0022005JES ↗
22. Nickel–copper supported on a carbon black hydrogen oxidation catalyst integrated into an anion-exchange membrane fuel cell10.1039/C8SE00261D ↗
23. Platinum and platinum group metal-free catalysts for anion exchange membrane fuel cells10.3390/en13030582 ↗
24. High-Performing PGM-free AEMFC cathodes from carbon-supported cobalt ferrite nanoparticles10.3390/catal9030264 ↗
25. High-loading composition-tolerant Co−Mn spinel oxides with performance beyond 1 W/cm2 in alkaline polymer electrolyte fuel cells10.1021/acsenergylett.9b00597 ↗
26. Synthesis and characterization of high performing Fe-N-C catalyst for oxygen reduction reaction (ORR) in Alkaline Exchange Membrane Fuel Cells10.1016/j.jpowsour.2017.08.036 ↗
27. Electrocatalytic oxygen reduction on transition metal macrocyclic complexes for anion exchange membrane fuel cell application10.1016/j.coelec.2018.04.001 ↗
28. High-performance oxygen reduction catalysts in both alkaline and acidic fuel cells based on pre-treating carbon material and iron precursor10.1016/j.scib.2017.10.020 ↗
29. Transition metal-containing nitrogen-doped nanocarbon catalysts derived from 5-methylresorcinol for anion exchange membrane fuel cell application10.1016/j.jcis.2020.09.114 ↗
30. Water – a key parameter in the stability of anion exchange membrane fuel cells10.1016/j.coelec.2018.03.019 ↗
31. Alkaline-stable anion exchange membranes: a review of synthetic approaches10.1016/j.progpolymsci.2019.101177 ↗
32. A comprehensive review on water management strategies and developments in anion exchange membrane fuel cells10.1016/j.ijhydene.2020.05.026 ↗
33. Manipulating water in high-performance hydroxide exchange membrane fuel cells through asymmetric humidification and wetproofing10.1149/2.0131506jes ↗
34. Durability challenges of anion exchange membrane fuel cells10.1039/D0EE01133A ↗
35. The critical relation between chemical stability of cations and water in anion exchange membrane fuel cells environment10.1016/j.jpowsour.2017.08.026 ↗
36. Steady state and transient simulation of anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.012 ↗
37. Importance of balancing membrane and electrode water in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.05.006 ↗
38. Beyond catalysis and membranes: visualizing and solving the challenge of electrode water accumulation and flooding in AEMFCs10.1039/C8EE00122G ↗
39. Review of cell performance in anion exchange membrane fuel cells10.1016/j.jpowsour.2017.07.117 ↗
40. Radiation grafted membranes for superior anion exchange polymer membrane fuel cells performance10.1016/j.ijhydene.2012.05.117 ↗
41. High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes10.1039/C6EE01958G ↗
42. An optimised synthesis of high performance radiation-grafted anion-exchange membranes10.1039/C6GC02526A ↗
43. Pt–Ru catalyzed hydrogen oxidation in alkaline media: oxophilic effect or electronic effect?10.1039/C4EE02564D ↗
44. Performance hysteresis phenomena of anion exchange membrane fuel cells using an Fe-N-C cathode catalyst and an in-house-developed polymer electrolyte10.1016/j.jpowsour.2020.229407 ↗
45. Predicting performance stability of anion exchange membrane fuel cells10.1016/j.jpowsour.2019.02.069 ↗
46. Quantifying the critical effect of water diffusivity in anion exchange membranes for fuel cell applications10.1016/j.memsci.2020.118206 ↗
47. Plasma techniques for the fabrication of polymer electrolyte membranes for fuel cells10.1016/j.memsci.2014.01.004 ↗
48. Steam activation of Fe-N-C catalyst for advanced power performance of alkaline hydrazine fuel cells10.1016/j.jechem.2021.04.029 ↗
49. Design principle of Fe−N−C electrocatalysts: how to optimize multimodal porous structures?10.1021/jacs.8b11129 ↗
50. Investigating silver nanoparticle interactions with quaternary ammonium functionalized triblock copolymers and their effect on midblock crystallinity
51. The critical importance of the ionomer on the electrochemical activity of platinum and platinum-free catalysts for anion-exchange membrane fuel cells10.1039/D0SE00483A ↗
52. High-performance poly(fluorenyl aryl piperidinium)-based anion exchange membrane fuel cells with realistic hydrogen supply10.1016/j.jpowsour.2021.230474 ↗
53. Effect of surface ion conductivity of anion exchange membranes on fuel cell performance10.1021/acs.langmuir.6b01747 ↗
54. Imaging individual proton-conducting spots on sulfonated multiblock-copolymer membrane under controlled hydrogen atmosphere by current-sensing atomic force microscopy10.1021/jp312041c ↗
55. Reversible/irreversible increase in proton-conductive areas on proton-exchange-membrane surface by applying voltage using current-sensing atomic force microscope10.1016/j.jelechem.2013.11.035 ↗
56. Effects of hot liquid-water treatment on local proton conductivity at surfaces of sulfonated poly(arylene ketone) block copolymer membrane for fuel cells studied by current-sensing atomic force microscopy10.1016/j.electacta.2014.08.031 ↗
57. Proton conductive areas on sulfonated poly(arylene ketone) multiblock copolymer electrolyte membrane studied by current-sensing atomic force microscopy10.5796/electrochemistry.82.369 ↗
58. Current-sensing atomic force microscopy for analyzing conformations and properties of polymer membranes for fuel cells10.1016/j.coelec.2020.04.013 ↗
59. Phase separation and ion conductivity in the bulk and at the surface of anion exchange membranes with different ion exchange capacities at different humidities10.1016/j.jpowsour.2017.06.081 ↗
60. Effects of carbon supports on Pt distribution, ionomer coverage and cathode performance for polymer electrolyte fuel cells10.1016/j.jpowsour.2016.02.091 ↗
61. Effect of Pt and ionomer distribution on polymer electrolyte fuel cell performance and durability10.1021/acsaem.0c02841 ↗
62. Oxygen reduction at the Pt/carbon black-polyimide ionomer interface10.1021/jp8095067 ↗
63. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗