journal article·2021-07

A novel multi-physics and multi-dimensional model for solid oxide fuel cell stacks based on alternative mapping of BP neural networks

Liming Ba, Xingyu Xiong, Zhibin Yang, Ze Lei, Ben Ge, Suping Peng

Publisher page

Abstract

Abstract Solid oxide fuel cell (SOFC) stacks have complex multi-physics and multi-dimensional properties that are very difficult to observe in experiments. To solve this problem, a new modeling concept called alternative mapping is introduced in this paper. Using an artificial neural network (ANN), a multi-physics and multi-dimensional stack model can be decomposed into two bonded layers. Both can be solved much more rapidly and robustly than conventional models without losses in accuracy. A SOFC stack model is developed based on this concept. It is calibrated and validated by data from a single cell test and 30-layer stack experiments. The model is robust and rapid. The stack model results show that different physics and dimensional properties are closely related. Changes in each may cause chain reactions in the others, influencing the electrical efficiency or operation ranges. In this report, a fully 3D multi-physics and multi-dimensional dynamic simulation of a SOFC stack is implemented for the first time. Its dynamic behavior is a composite of electric-chemical reactions, gas transport, and heat transfer. These factors vary considerably in different positions and operational conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Energy: reimagine fuel cells10.1038/525447a ↗
2. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
3. Development of lanthanum strontium cobalt ferrite perovskite electrodes of solid oxide fuel cells – a review10.1016/j.ijhydene.2019.01.212 ↗
4. Dealing with fuel contaminants in biogas-fed solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) plants: degradation of catalytic and electro-catalytic active surfaces and related gas purification methods10.1016/j.pecs.2017.04.002 ↗
5. Fundamental mechanisms involved in the degradation of nickel–yttria stabilized zirconia (Ni–YSZ) anode during solid oxide fuel cells operation: a review10.1016/j.ceramint.2015.09.006 ↗
6. A review on catalyst development for dry reforming of methane to syngas: recent advances10.1016/j.rser.2019.03.054 ↗
7. A review on dry reforming of methane in aspect of catalytic properties10.1016/j.cattod.2018.07.032 ↗
8. Comprehensive review of methane conversion in solid oxide fuel cells: prospects for efficient electricity generation from natural gas10.1016/j.pecs.2015.10.004 ↗
9. A review of integration strategies for solid oxide fuel cells10.1016/j.jpowsour.2009.07.045 ↗
10. Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: a review10.1016/j.apenergy.2015.06.027 ↗
11. Progress in solid oxide fuel cell-gas turbine hybrid power systems: system design and analysis, transient operation, controls and optimization10.1016/j.apenergy.2018.01.098 ↗
12. Neutron imaging of fuel cells – recent trends and future prospects10.1016/j.coelec.2017.07.012 ↗
13. X-ray absorption spectroscopic studies on solid oxide fuel cells and proton-conducting ceramic fuel cells10.1016/j.coelec.2020.03.017 ↗
14. A review of numerical modeling of solid oxide fuel cells10.1016/j.ijhydene.2006.11.028 ↗
15. A review study on software-based modeling of hydrogen-fueled solid oxide fuel cells10.1016/j.ijhydene.2019.03.217 ↗
16. Mathematical modeling of solid oxide fuel cells: a review10.1016/j.rser.2010.12.011 ↗
17. A review of modeling and simulation techniques across the length scales for the solid oxide fuel cell10.1016/j.jpowsour.2011.10.010 ↗
18. A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks10.1016/j.apenergy.2017.01.034 ↗
19. Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack10.1016/j.jpowsour.2017.10.030 ↗
20. Geometric optimization of a 10-cell modular planar solid oxide fuel cell stack manifold10.1016/j.apenergy.2013.04.035 ↗
21. A 3D CFD model for predicting the temperature distribution in a full scale APU SOFC short stack under transient operating conditions10.1016/j.apenergy.2014.08.052 ↗
22. A numerical study of cell-to-cell variations in a SOFC stack10.1016/j.jpowsour.2003.08.034 ↗
23. A quasi-two-dimensional electrochemistry modeling tool for planar solid oxide fuel cell stacks10.1016/j.jpowsour.2010.11.123 ↗
24. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
25. Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks10.1016/j.ijhydene.2016.05.103 ↗
26. Flow distribution analyzing for the solid oxide fuel cell short stacks with rectangular and discrete cylindrical rib configurations10.1016/j.ijhydene.2014.10.125 ↗
27. Two-dimensional temperature distribution estimation for a cross-flow planar solid oxide fuel cell stack
28. Design and numerical analysis of a planar anode-supported SOFC stack10.1016/j.renene.2016.03.098 ↗
29. Numerical simulation of cell-to-cell performance variation within a syngas-fuelled planar solid oxide fuel cell stack10.1016/j.applthermaleng.2016.12.014 ↗
30. A coupled 3D thermofluid–thermomechanical analysis of a planar type production scale SOFC stack10.1016/j.ijhydene.2011.06.045 ↗
31. Dynamic analysis of direct internal reforming in a SOFC stack with electrolyte-supported cells using a quasi-1D model10.1016/j.apenergy.2017.07.122 ↗
32. Numerical simulation of flow distribution for external manifold design in solid oxide fuel cell stack10.1016/j.ijhydene.2016.12.009 ↗
33. Thermal analysis of a 1-kW hydrogen-fueled solid oxide fuel cell stack by three-dimensional numerical simulation
34. Modelling the SOFC behaviours by artificial neural network10.1016/j.ijhydene.2009.04.068 ↗
35. Performance optimization and selection of operating parameters for a solid oxide fuel cell stack
36. A neural network estimator of Solid Oxide Fuel Cell performance for on-field diagnostics and prognostics applications10.1016/j.jpowsour.2013.04.114 ↗
37. Artificial neural network model of a short stack solid oxide fuel cell based on experimental data10.1016/j.jpowsour.2013.08.018 ↗
38. Maximizing SOFC performance through optimal parameters identification by modern optimization algorithms10.1016/j.renene.2019.01.072 ↗
39. From in-situ to in-operando evaluation of SOFC cathodes for enhanced ORR activity and durability10.1149/07801.0835ecst ↗
40. Control design of an atmospheric solid oxide fuel cell/gas turbine hybrid system: variable versus fixed speed gas turbine operation10.1016/j.jpowsour.2006.03.059 ↗
41. Approximation capabilities of multilayer feedforward networks
42. Edward · 1983
43. Jacob · 1972
44. Hines · 1985
45. Estimation of the Co-ordination number in a multi-component mixture of spheres10.1016/0032-5910(83)87004-1 ↗
46. A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells10.1016/j.electacta.2005.09.041 ↗
47. Fogler · 2006
48. Simon · 2009