journal article·2021-04

Defect engineering tuning of MnO2 nanorods bifunctional cathode for flexible asymmetric supercapacitors and microbial fuel cells

Wenda Qiu, Hongbing Xiao, Hong Gao

Publisher page

Abstract

Abstract An effective surface and structural modulation strategy is developed to greatly boost the electron transfer rate, active sites as well as cycle stability of MnO2 nanorods by introducing native oxygen vacancies. Consequently, the as-prepared material exhibits exceptional performances as a dual function positive electrode for flexible asymmetric supercapacitors (ASCs) and microbial fuel cells (MFCs). Benefiting from its higher surface area, increased active sites and much better reaction kinetics, the maximum energy density of ASCs device reaches 56.04 Wh kg−1, and the highest power density is 1639 mW m−2 for the MFCs device. Most importantly, a self-powered system has been built by integrating the flexible ASCs and MFCs, which be able to achieve chemical energy conversion and energy storage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced battery technologies research · Microbial Fuel Cells and Bioremediation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Efficiently photo-charging lithium-ion battery by perovskite solar cell10.1038/ncomms9103 ↗
2. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
3. Light-induced lattice expansion leads to high-efficiency perovskite solar cells10.1126/science.aap8671 ↗
4. Effective energy storage from a triboelectric nanogenerator10.1038/ncomms10987 ↗
5. Eye motion triggered self-powered mechno sensational communication system using triboelectric nanogenerator10.1126/sciadv.1700694 ↗
6. Holey tungsten oxynitride nanowires: novel anodes efficiently integrate microbial chemical energy conversion and electrochemical energy storage10.1002/adma.201500493 ↗
7. Dual-doped molybdenum trioxide nanowires: a bifunctional anode for fiber-shaped asymmetric supercapacitors and microbial fuel cells10.1002/anie.201602631 ↗
8. Wearable thermocells based on gel electrolytes for the utilization of body heat10.1002/anie.201606314 ↗
9. Induced potential in porous carbon films through water vapor absorption10.1002/anie.201602708 ↗
10. Solar-driven simultaneous steam production and electricity generation from salinity10.1039/C7EE01804E ↗
11. Self-biased solar-microbial device for sustainable hydrogen generation10.1021/nn403082m ↗
12. Solar-assisted microbial fuel cells for bioelectricity and chemical fuel generation10.1016/j.nanoen.2014.06.004 ↗
13. Hybrid nanostructured materials for high-performance electrochemical capacitors10.1016/j.nanoen.2012.10.006 ↗
14. H-TiO2@MnO2//H-TiO2@C core-shell nanowires for high performance and flexible asymmetric supercapacitors10.1002/adma.201203410 ↗
15. TiO2@C core–shell nanowires for high-performance and flexible solid-state supercapacitors10.1039/C2TC00047D ↗
16. A flexible integrated system containing a microsupercapacitor, a photodetector, and a wireless charging coil10.1021/acsnano.6b06326 ↗
17. Stretchable array of high-performance micro-supercapacitors charged with solar cells for wireless powering of an integrated strain sensor10.1016/j.nanoen.2018.05.017 ↗
18. Printable magnesium ion quasi-solid-state asymmetric supercapacitors for flexible solar-charging integrated units10.1038/s41467-019-12900-4 ↗
19. Definitions of pseudocapacitive materials: a brief review
20. Microbial fuel cells: from fundamentals to applications. A review10.1016/j.jpowsour.2017.03.109 ↗
21. Oxygen vacancies enhancing capacitive properties of MnO2 nanorods for wearable asymmetric supercapacitors10.1016/j.nanoen.2014.06.013 ↗
22. Strategies and insights towards the intrinsic capacitive properties of MnO2 for supercapacitors: challenges and perspectives10.1016/j.nanoen.2018.12.015 ↗
23. Oxygen defects in promoting the electrochemical performance of metal oxides for supercapacitors: recent advances and challenges10.1002/smtd.201900823 ↗
24. Scalable self-growth of Ni@ NiO core-shell electrode with ultrahigh capacitance and super-long cyclic stability for supercapacitors10.1038/am.2014.78 ↗
25. Monolithic three-dimensional graphene frameworks derived from inexpensive graphite paper as advanced anodes for microbial fuel cells10.1039/C6TA00992A ↗
26. Increased performance of single-chamber microbial fuel cells using an improved cathode structure10.1016/j.elecom.2006.01.010 ↗
27. Direct sonochemical synthesis of manganese octahedral molecular sieve (OMS-2) nanomaterials using cosolvent systems, their characterization, and catalytic applications10.1021/cm203366m ↗
28. Oxygen vacancies enhancing capacitive properties of MnO2 nanorods for wearable asymmetric supercapacitors10.1016/j.nanoen.2014.06.013 ↗
29. Enhancing electrocatalytic oxygen reduction on MnO2 with vacancies10.1002/anie.201208582 ↗
30. Manganese oxide thin film preparation by potentiostatic electrolyses and electrochromism10.1149/1.1393515 ↗
31. X-ray photoelectron spectroscopy and in situ X-ray absorption spectroscopy studies on reversible insertion/desertion of dicyanamide anions into/from manganese oxide in ionic liquid10.1021/cm9000569 ↗
32. Influence of microstucture on the charge storage properties of chemically synthesized manganese dioxide10.1021/cm020408q ↗
33. Pulse electrodeposition of manganese oxide for high-rate capability supercapacitors10.1016/S1452-3981(23)15795-6 ↗
34. Raman spectroscopy of AMn2O4 (A= Mn, Mg and Zn) spinels10.1039/b203520k ↗
35. High mass loading MnO2 with hierarchical nanostructures for supercapacitors10.1021/acsnano.8b00621 ↗
36. Structural directed growth of ultrathin parallel birnessite on β-MnO2 for high-performance asymmetric supercapacitors10.1021/acsnano.7b03431 ↗
37. Editable supercapacitors with customizable stretchability based on mechanically strengthened ultralong MnO2 nanowire composite10.1002/adma.201704531 ↗
38. Fiber-based MnO2/carbon nanotube/polyimide asymmetric supercapacitor10.1016/j.carbon.2017.09.103 ↗
39. Construction of hierarchical α-MnO2 nanowires@ultrathin δ-MnO2 nanosheets core–shell nanostructure with excellent cycling stability for high-power asymmetric supercapacitor electrodes10.1021/acsami.5b11300 ↗
40. Facile synthesis of a nitrogen-doped graphene flower-like MnO2 nanocomposite and its application in supercapacitors10.1016/j.apsusc.2017.07.291 ↗
41. Morphology controlled MnO2 electrodeposited on carbon fiber paper for high-performance supercapacitors10.1016/j.jpowsour.2017.03.104 ↗
42. Rational design of hierarchically porous birnessite-type manganese dioxides nanosheets on different one-dimensional titania-based nanowires for high performance supercapacitors10.1016/j.jpowsour.2014.07.114 ↗
43. MnO2 nanoflake-shelled carbon nanotube particles for high-performance supercapacitors10.1021/acssuschemeng.6b02803 ↗
44. Direct interfacial growth of MnO2 nanostructure on hierarchically porous carbon for high-performance asymmetric supercapacitors10.1021/acssuschemeng.7b02960 ↗
45. CVD-grown polypyrrole nanofilms on highly mesoporous structure MnO2 for high performance asymmetric supercapacitors10.1016/j.cej.2016.08.074 ↗
46. Rational construction of bowl-like MnO2 nanosheets with excellent electrochemical performance for supercapacitor electrodes10.1016/j.cej.2018.05.169 ↗
47. Valence and surface modulated vanadium oxide nanowires as new high-energy and durable negative electrode for flexible asymmetric supercapacitors10.1016/j.ensm.2019.02.012 ↗
48. Oxygen-vacancy and surface modulation of ultrathin nickel cobaltite nanosheets as a high-energy cathode for advanced Zn-ion batteries10.1002/adma.201802396 ↗
49. Hydrogenated ZnO core–shell nanocables for flexible supercapacitors and self-powered systems10.1021/nn306044d ↗
50. Layered-MnO2 nanosheet grown on nitrogen-doped graphene template as a composite cathode for flexible solid-state asymmetric supercapacitor10.1021/acsami.5b10649 ↗
51. High performance asymmetric supercapacitor twisted from carbon fiber/MnO2 and carbon fiber/MoO310.1016/j.carbon.2017.02.033 ↗
52. Facile synthesis of hierarchical Co3O4@MnO2 core–shell arrays on Ni foam for asymmetric supercapacitors10.1016/j.jpowsour.2013.12.030 ↗
53. Facile synthesis of ultrathin manganese dioxide nanosheets arrays on nickel foam as advanced binder-free supercapacitor electrodes10.1016/j.jpowsour.2014.12.005 ↗
54. Asymmetric supercapacitors based on graphene/MnO2 nanospheres and graphene/MoO3 nanosheets with high energy density10.1002/adfm201301851 ↗
55. Flexible asymmetric micro-supercapacitors based on Bi2O3 and MnO2 nanoflowers: larger areal mass promises higher energy density10.1002/aenm.201401882 ↗
56. ZnO@MnO2 core–shell nanofiber cathodes for high performance asymmetric supercapacitors10.1021/acsami.6b08082 ↗
57. High‐performance asymmetric supercapacitors based on multilayer MnO2/graphene oxide nanoflakes and hierarchical porous carbon with enhanced cycling stability10.1002/smll.201401922 ↗
58. Self-assembly of mesoporous nanotubes assembled from interwoven ultrathin birnessite-type MnO2 nanosheets for asymmetric supercapacitors10.1038/srep03878 ↗
59. High-performance flexible asymmetric supercapacitors based on a new graphene foam/carbon nanotube hybrid film10.1039/C4EE01475H ↗
60. Fabrication of hierarchical MnMoO4·H2O@MnO2 core-shell nanosheet arrays on nickel foam as an advanced electrode for asymmetric supercapacitors10.1016/j.cej.2017.11.085 ↗