The promotion of phase transitions for Ni-based layered cathode towards enhanced high-voltage cycle stability
Source abstract
Abstract
Abstract Ni-based layered oxide LiNi0.8Co0.1Mn0.1O2 shows great promise for high-energy lithium-ion batteries. But the realization of its high capacity is often at the expanse of chemical and structural stability because deeply delithiation upon charge can leave the structure more vulnerable. Herein, we demonstrate that this problem can be alleviated by concurrently introducing some of Na+ and Ti4+ to obtained Li0.98Na0.01Ni0.78Co0.1Mn0.1Ti0.02O2 (NT-NCM). The co-doping successfully accelerates the phase transition process (H1 to H2 and to H3), and the enhanced reversible capacity and capacity retention at a high cut-off voltage of 4.5 V are achieved with the NT-NCM electrode. This is possible due to the less lattice stress and mechanical degradation after co-doping during prolonged cycling; the enlarged c axis distance and reduced Li+/Ni2+ mixing for doped one assist in enhancing the Li-ion transportation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
2. Challenges in the development of advanced Li-Ion batteries: a review10.1039/c1ee01598b ↗
3. Nickel-rich layered cathode materials for automotive lithium-ion batteries: achievements and perspectives10.1021/acsenergylett.6b00594 ↗
4. LiNi0.8Co0.15Al0.05O2 cathode material: new insights via 7Li and 27Al magic-angle spinning NMR spectroscopy10.1021/acs.chemmater.6b01412 ↗
5. High-performance and industrially feasible Ni-rich layered cathode materials by integrating coherent interphase10.1021/acsami.8b05648 ↗
6. Stabilizing nickel-rich layered oxide cathodes by magnesium doping for rechargeable lithium-ion batteries10.1039/C8SC03385D ↗
7. Comparison of nanorod-structured Li[Ni0.54Co0.16Mn0.30]O2 with conventional cathode materials for Li-ion batteries10.1002/cssc.201300379 ↗
8. Surface/Interfacia structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
9. Revealing the correlation between structuralevolution and Li+ diffusion kinetics of nickel-rich cathode materials in Li-ion batteries10.1039/D0TA00555J ↗
10. Correlating structural changes of the improved cyclability upon Nd-substitution in LiNi0.5Co0.2Mn0.3O2 cathode materials10.1016/j.ensm.2018.09.003 ↗
11. Design of nickel-based cation-disordered rock-salt oxides: the effect of transition metal (M = V, Ti, Zr) substitution in LiNi0.5M0.5O2 binary systems10.1021/acsami.8b02266 ↗
12. The role of Zr doping in stabilizing Li[Ni0.6Co0.2Mn0.2]O2 as a cathode material for lithium-ion batteries10.1002/cssc.201900500 ↗
13. Electrochemical properties of ZrO2-coated LiNi0.8Co0.2O2 cathode materials10.1016/j.jpowsour.2005.12.035 ↗
14. Effects of Mg-substitution in Li(Ni,Co,Al)O2 positive electrode materials on the crystal structure and battery performance10.1016/j.jpowsour.2007.06.035 ↗
15. Structural and thermal properties of LiNi0.6−xMgxCo0.25Mn0.15O2 cathode materials10.1016/j.jpowsour.2008.05.058 ↗
16. Structural and electrochemical characterization of lithium excess and Al-doped nickel oxides synthesized by the sol–gel method10.1016/S0013-4686(00)00710-6 ↗
17. Extending the battery life using an Al-doped Li[Ni0.76Co0.09Mn0.15]O2 cathode with concentration gradients for lithium ion batteries10.1021/acsenergylett.7b00613 ↗
18. Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level10.1016/j.jpowsour.2011.08.059 ↗
19. Improved electrochemical properties of chromium substituted in LiCr1 − xNixO2 cathode materials for rechargeable lithium-ion batteries
20. Electrochemical behavior of Cr-doped composite Li2MnO3-LiMn0.5Ni0.5O2 cathode materials10.1149/2.059204jes ↗
21. Revealing the effect of Ti doping on significantly enhancing cyclic performance at a high cutoff voltage for Ni-Rich LiNi0.8Co0.15Al0.05O2 cathode10.1021/acssuschemeng.9b01312 ↗
22. Synergic coating and doping effects of Ti-modified integrated layered–spinel Li1.2Mn0.75Ni0.25O2+δ as a high capacity and long lifetime cathode material for Li-ion batteries10.1039/C7TA09118D ↗
23. A comprehensive analysis of the interphasial and structural evolution over long-term cycling of ultrahigh-nickel cathodes in lithium-ion batteries10.1002/aenm.201902731 ↗
24. Building nickel-rich cathodes with large concentration gradient for high performance lithium-ion batteries10.1016/j.jpowsour.2020.228405 ↗
25. Comparative study of LiCoO2, LiNiCoO2 and LiNiO2 for 4 volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗
26. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
27. Electrochemistry and structural chemistry of LiNiO2 (R3̅m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
28. A perspective on nickel-rich layered oxide cathodes for lithium-ion batteries10.1016/j.ensm.2016.10.007 ↗
29. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles10.1021/acs.nanolett.5b00045 ↗
30. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li-ion batteries10.1002/aenm.201801202 ↗
31. An electrochemical investigation into the lithium insertion properties of LixNiO2 (0≤x≤1)10.1016/0167-2738(96)00262-7 ↗
32. Cation and anion Co-doping synergy to improve structural stability of Li- and Mn-rich layered cathode materials for lithium-ion batteries10.1016/j.nanoen.2018.12.049 ↗
33. Surface modification for suppressing interfacial parasitic reactions of a nickel-rich lithium-ion cathode10.1021/acs.chemmater.8b04200 ↗
34. Structural and electrochemical aspects ofLiNi0.8Co0.1Mn0.1O2 cathode materials doped by various cations10.1021/acsenergylett.8b02302 ↗