Reducing the electrochemical capacity decay of milled Mg–Ni alloys: The role of stabilizing amorphous phase by Ti-substitution
Source abstract
Abstract
Abstract MgNi-based alloys have high electrochemical capacity as anode of nickel-metal hydride (Ni/MH) battery (≥500 mAh g−1). However the capacity decay seriously in charge-discharge cycling, which is previously ascribed to the corrosion of Mg. To solve this problem and reveal the related mechanism, the electrochemcial properties of Mg0.50Ni0.50, Mg0.45Ti0.05Ni0.05 and Mg0.40Ti0.10Ni0.50 alloys are studied in combination with their hydrogen storage properties and microstuctural evolution during cycling. This work demonstrates the amorphous phase in milled Mg0.45Ti0.05Ni0.50 and Mg0.40Ti0.10Ni0.50 alloys has higher resistance to hydrogenation-induced crystallization than milled Mg0.50Ni0.50 alloy. Thus, they show better hydrogen absorption/desorption reversibility and contribute to the reversible electrochemical capacity. Therefore, the cycle performance of the Mg0.50Ni0.50 alloy electrodes shows obvious improvement after partially substituting Mg by Ti. The capacity retention rate increases from 24.0% (Mg0.50Ni0.50) to 55.7% (Mg0.40Ti0.10Ni0.50) after 30 cycles. In addition, the Ti addition results in the formation of TiNi phase, and thus, the alloys show better electrochemical reaction kinetics and their high-rate dischargeability (HRD) is significantly improved. At 300 mA g−1, the HRD values of Mg0.50Ni0.50, Mg0.45Ti0.05Ni0.50 and Mg0.40Ti0.10Ni0.50 alloys are 41.7%, 83.7% and 90.3%, respectively. At higher discharge current density of 1200 mA g−1, the HRD values are 26.7%, 34.8% and 46.2%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Electrochemical behavior of some mechanically alloyed Mg-Ni-based amorphous hydrogen storage alloys10.1524/zpch.1994.183.Part_1_2.379 ↗
2. Hydriding and electrochemical characteristics of a homogeneous amorphous Mg2Ni-Ni composite10.1016/S0925-8388(98)00517-9 ↗
3. Enhanced electrochemical hydrogen storage properties of Mg2NiH4 by coating with nano-nickel10.1016/j.ijhydene.2015.08.076 ↗
4. Electrochemical hydrogen storage characteristics of nanocrystalline and amorphous Mg20Ni10-xCox (x = 0-4) alloys prepared by melt spinning10.1016/j.ijhydene.2009.07.097 ↗
5. Properties of mechanically alloyed Mg-Ni-Ti ternary hydrogen storage alloys for Ni-MH batteries10.1016/S0378-7753(02)00451-2 ↗
6. Electrochemical characteristics of an amorphous Mg0.9V0.1Ni alloy prepared by mechanical alloying10.1016/S0925-8388(98)00736-1 ↗
7. Superior hydrogen storage and electrochemical properties of MgxNi100-x/Pd films at room temperature10.1039/c3dt51628h ↗
8. The electrochemical performances of Mg0.9Ti0.1Ni1-xPdx (x = 0-0.15) hydrogen storage electrode alloys10.1016/j.jpowsour.2006.04.061 ↗
9. Evaluation of different approaches for improving the cycle life of MgNi-based electrodes for Ni-MH batteries10.1016/j.jpowsour.2005.09.006 ↗
10. Improving the performance of hydrogen storage electrodes based on mechanically alloyed Mg61Ni30Y910.1016/j.jallcom.2007.04.007 ↗
11. The electrochemical properties of LaxMg3-xNi9 (x = 1.0 - 2.0)10.1016/S0925-8388(03)00083-5 ↗
12. Effect of the La/Mg ratio on the structure and electrochemical properties of LaxMg3-xNi9 (x = 1.6 - 2.2) hydride storage electrode alloys for nickel-metal hydride batteries10.1016/j.jpowsour.2003.11.044 ↗
13. Effect of Al content on structure and electrochemical properties of LaNi4.4-xCo0.3Mn0.3Alx hydrogen storage alloys10.1016/j.ijhydene.2013.02.139 ↗
14. Effect of high and low temperature on the electrochemical performance of LaNi4.4-xCo0.3Mn0.3Alx hydrogen storage alloys10.1016/j.jallcom.2013.06.031 ↗
15. Advanced hydrogen storage alloys for Ni/MH rechargeable batteries10.1039/C0JM01921F ↗
16. An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys10.1016/S0378-7753(00)00400-6 ↗
17. Effects of Ti on the cycle life of amorphous MgNi-based alloy prepared by ball milling10.1016/S0925-8388(00)00753-2 ↗
18. Electrochemical characteristics of amorphous Mg0.9M0.1Ni (M = Ni, Ti, Zr, Co and Si) ternary alloys prepared by mechanical alloying10.1016/S0925-8388(00)01130-0 ↗
19. The effects of partial substitution of Cr for Ni on the electrochemical properties of Mg1.75Al0.25Ni1-xCrx (0≤x≤0.3) electrode alloys10.1016/j.jpowsour.2006.04.016 ↗
20. Effect of Al, B, Ti and Zr additive elements on the electrochemical hydrogen storage performance of MgNi alloy10.1016/j.ijhydene.2010.10.087 ↗
21. Effects of Pd substitution on the electrochemical properties of Mg0.9-xTi0.1PdxNi (x = 0.04-0.1) hydrogen storage alloys10.1016/j.jpowsour.2005.10.068 ↗
22. Comparative study on the structure and electrochemical hydriding properties of MgTi, Mg0.5Ni0.5Ti and MgTi0.5Ni0.5 alloys prepared by high energy ball milling10.1016/j.jpowsour.2010.09.008 ↗
23. Microstructures and electrochemical properties of Mg49Ti6Ni(45-x)Mx (M = Pd and Pt) alloy electrodes10.1002/er.3008 ↗
24. Surface modification of MgNi alloy with graphite by ball-milling for use in nickel-metal hydride batteries10.1039/cc9960001831 ↗
25. Electrochemical studies of the effect of surface modification of amorphous MgNi electrodes by carbon or Ni10.1016/S0925-8388(02)00901-5 ↗
26. Improved electrochemical properties of amorphous Mg65Ni27La8 electrodes: surface modification using graphite10.1016/j.jpowsour.2008.11.145 ↗
27. Effects of Cs2CO3 additive in KOH electrolyte used in Ni/MH batteries10.3390/batteries3040041 ↗
28. Hydrogenation and crystallization of amorphous phase: a new mechanism for the electrochemical capacity and its decay in milled Mg-Ni alloys10.1016/j.electacta.2019.02.122 ↗
29. Influence of Zr addition on structure and performance of rare earth Mg-based alloys as anodes in Ni/MH battery10.3390/met5020565 ↗
30. Electrochemical characteristics of a homogeneous amorphous alloy prepared by ball-milling Mg2Ni with Ni10.1016/S0925-8388(97)00491-X ↗
31. Magnesium-based hydrogen storage materials modified by mechanical alloying10.1016/S1359-6454(99)00249-9 ↗
32. Preparation and hydrogen storage properties of nanostructured Mg-Ni BCC alloys10.1016/j.jallcom.2008.11.004 ↗
33. Low temperature de/hydrogenation in the partially crystallized Mg60Ce10Ni20Cu10 metallic glasses induced by milling with process control agents10.1016/j.jallcom.2019.04.029 ↗
34. Metal hydride electrodes based on solid solution type alloy TiV3Nix (0≤x≤0.75)10.1016/0925-8388(95)01570-1 ↗
35. Effects of substitution with foreign metals on the crystallographic, thermodynamic and electrochemical properties of AB5-type hydrogen storage alloys10.1016/0013-4686(95)00283-K ↗
36. Surface modification of metal hydride negative electrodes and their charge/discharge performance10.1016/0378-7753(92)80123-S ↗
37. Progress of hydrogen storage alloys for Ni-MH rechargeable power batteries in electric vehicles: a review10.1016/j.matchemphys.2017.07.002 ↗
38. Electrochemical impedance and deterioration behavior of metal hydride electrodes10.1016/0925-8388(93)90538-X ↗
39. Electrochemical impedance spectra and deterioration mechanism of metal hydride electrodes10.1149/1.2221180 ↗
40. Double phase hydride forming compounds: a new class of highly electrocatalytic materials10.1149/1.2085893 ↗
41. Electrochemical studies on LaNi5-xSnx metal hydride alloys10.1149/1.1837050 ↗
42. Determination of chemical diffusion coefficients in metal hydride particles with a microelectrode technique10.1149/1.1837582 ↗
43. Electrochemical determination of the diffusion-coefficient of hydrogen through an LaNi4.25Al0.75 electrode in alkaline aqueous solution10.1149/1.2050076 ↗