journal article·2019-09

Experimental study on water management improvement of proton exchange membrane fuel cells with dead-ended anode by periodically supplying fuel from anode outlet

Jing Zhao, Qifei Jian, Zipeng Huang, Lizhong Luo, Bi Huang

Publisher page

Abstract

Abstract Proton exchange membrane fuel cells operating in dead-ended anode mode are vulnerable to water management problems. The uneven water distribution within the cells may induce local water flooding, which in turn leads to a significant decrease in output performance. Based on the dead-ended anode system, an improved mode, called two-way hydrogen supply mode, is applied to improve the water management of fuel cells. In this mode, some components, including several additional lines and a solenoid valve, are added between the hydrogen inlet and outlet lines so that hydrogen can be fed periodically to the stack from the anode outlet in addition to the anode inlet. A 10-cell open cathode proton exchange membrane fuel cell stack is tested both in the dead-ended anode mode and two-way hydrogen supply mode, and related parameters are introduced to verify the effectiveness of the mode. The experimental results show that the improved mode can effectively improve the water distribution in the stack thus reducing the local water clogging and voltage decay rate. Moreover, the main factors affecting the two-way hydrogen supply mode are also investigated to explore their effects on the operating characteristics of fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Larminie · 2003
2. Water balance for the design of a PEM fuel cell system10.1016/j.ijhydene.2012.12.014 ↗
3. Evaluation of performance enhancement by condensing the anode moisture in a proton exchange membrane fuel cell stack10.1016/j.applthermaleng.2017.03.128 ↗
4. Fuel cell diagnosis method based on multifractal analysis of stack voltage signal10.1016/j.ijhydene.2013.11.066 ↗
5. An experimental study on the cathode humidification and evaporative cooling of polymer electrolyte membrane fuel cells using direct water injection method at high current densities10.1016/j.applthermaleng.2016.01.091 ↗
6. Experimental thermal analysis on air cooling for closed-cathode Polymer Electrolyte Membrane fuel cells10.1016/j.ijhydene.2015.06.095 ↗
7. Performance characteristics of a polymer electrolyte fuel cell with the anodic supply mode
8. Transient analysis of gas transport in anode channel of a polymer electrolyte membrane fuel cell with dead-ended anode under pressure swing operation10.1016/j.jpowsour.2014.09.023 ↗
9. Experimental study of hydrogen purge effects on performance and efficiency of an open-cathode Proton Exchange Membrane fuel cell system10.1016/j.jpowsour.2013.09.122 ↗
10. Different flow fields, operation modes and designs for proton exchange membrane fuel cells with dead-ended anode10.1016/j.ijhydene.2017.10.137 ↗
11. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
12. Visualization of flooding in a single cell and stacks by using a newly-designed transparent PEMFC10.1016/j.ijhydene.2011.09.073 ↗
13. Proton exchange membrane fuel cell reversal: a review10.3390/catal6120197 ↗
14. Performance degradation of a proton exchange membrane fuel cell with dead-ended cathode and anode10.1016/j.applthermaleng.2017.12.078 ↗
15. High potential excursions during PEM fuel cell operation with dead-ended anode10.1149/2.0511510jes ↗
16. Local potential evolutions during proton exchange membrane fuel cell operation with dead-ended anode – Part I: impact of water diffusion and nitrogen crossover10.1016/j.jpowsour.2016.11.079 ↗
17. Performance degradation and recovery characteristics during gas purging in a proton exchange membrane fuel cell with a dead-ended anode10.1016/j.applthermaleng.2017.10.102 ↗
18. A purge strategy for proton exchange membrane fuel cells under varying-load operations10.1016/j.ijhydene.2016.05.132 ↗
19. Anode purge strategy optimization of the polymer electrode membrane fuel cell system under the dead-end anode operation10.1016/j.jpowsour.2016.04.023 ↗
20. Experimental study on the optimal purge duration of a proton exchange membrane fuel cell with a dead-ended anode10.1016/j.jpowsour.2016.11.039 ↗
21. Operation of a planar free-breathing PEMFC in a dead-end mode10.1016/j.elecom.2006.12.002 ↗
22. An experimental study on water transport through the membrane of a PEFC operating in the dead-end mode10.1016/j.ijhydene.2009.07.010 ↗
23. Evaluation of self-water-removal in a dead-ended proton exchange membrane fuel cell10.1016/j.apenergy.2012.12.008 ↗
24. Local potential evolutions during proton exchange membrane fuel cell operation with dead-ended anode – Part II: aging mitigation strategies based on water management and nitrogen crossover10.1016/j.jpowsour.2016.10.045 ↗
25. Water permeation analysis on gas diffusion layers of proton exchange membrane fuel cells for Teflon-coating annotation10.1016/j.jpowsour.2009.07.049 ↗
26. Effect of PTFE content in gas diffusion media and microlayer on the performance of PEMFC tested under ambient pressure10.1002/fuce.200600032 ↗
27. A liquid water management strategy for PEM fuel cell stacks10.1016/S0378-7753(02)00591-8 ↗
28. Active gas management for PEM fuel cell stacks10.1016/j.jpowsour.2004.06.029 ↗
29. Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers10.1016/j.jpowsour.2010.03.021 ↗
30. An experimental study on the purge characteristics of the cathodic dead-end mode PEMFC for the submarine or aerospace applications and performance improvement with the pulsation effects10.1016/j.ijhydene.2010.01.133 ↗
31. Experimental study on the performance improvement of polymer electrolyte membrane fuel cell with dual air supply10.1016/j.renene.2019.04.029 ↗
32. Performance improvement for proton exchange membrane fuel cell using hydrogen pressure pulsation approach10.1115/1.4031525 ↗
33. Diagnostic tool to detect electrode flooding in proton‐exchange‐membrane fuel cells10.1002/aic.690491221 ↗
34. Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells10.1016/j.electacta.2006.10.030 ↗