journal article·2019-04

Lattice deformation of LiNi0.5Mn1.5O4 spinel cathode for Li-ion batteries by ball milling

Takahiro Kozawa

Publisher page

Abstract

Abstract Mechanical processes such as ball milling trigger lattice deformations into particles. The electrochemical performances of the electrode materials used for Li-ion batteries depend on Li+ mobility within the crystal structure. Therefore, the preparation of electrode particles that contain no lattice deformations is required. However, electrode particles are subjected to mechanical stresses during manufacturing processes such as grinding, mixing, and coating of powders. In this study, the introduction of lattice strains and defects into the LiNi0.5Mn1.5O4 (LNMO) spinel by a simple ball-milling process is investigated, together with the relationship between lattice deformation and cathode properties. Lattice strain accumulates in the LNMO crystal with increased milling time, but the crystallite size of the distorted particles reduces in order to mitigate this effect. Although mechanical treatment leads to a decrease in the first discharge capacity, there is a recovery in capacity after the second discharge owing to crystal rearrangement that occurs after the initial extraction and insertion of Li+ from the distorted LNMO spinel. Nonetheless, excessive lattice deformation in the LNMO spinel, which contains a three-dimensional diffusion pathway for Li+, disturbs fast migration. The design and quality management of electrode particles throughout the manufacturing process are key factors for improving battery performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Particle size dependence of the ionic diffusivity10.1021/nl1023595 ↗
2. Atomic-scale investigation of defects, dopants, and lithium transport in the LiFePO4 olivine-type battery material10.1021/cm050999v ↗
3. Is small particle size more important than carbon coating? An example study on LiFePO4 cathodes10.1016/j.elecom.2007.09.020 ↗
4. Effect of particle size on LiMnPO4 cathodes10.1016/j.jpowsour.2007.06.203 ↗
5. Size and shape controlled LiMnPO4 nanocrystals by a supercritical ethanol process and their electrochemical properties10.1039/c1jm12208h ↗
6. Synthesis and electrochemistry of spinel LT-LiCoO210.1016/0167-2738(93)90251-W ↗
7. Microwave-assisted solid-state synthesis of LiCoO2 and its electrochemical properties as a cathode material for lithium batteries10.1039/b105008g ↗
8. Electrochemical and structural properties of HT-LiCoO2 and LT-LiCoO2 prepared by the citrate sol-gel method10.1016/S0167-2738(98)00559-1 ↗
9. Narrowing of the Co-3d band related to the order-disorder phase transition in LiCoO210.1016/S0038-1098(02)00325-3 ↗
10. Lithium-cobalt-nickel-oxide cathode materials prepared at 400 °C for rechargeable lithium batteries10.1016/0167-2738(92)90447-W ↗
11. Insertion of lattice strains into ordered LiNi0.5Mn1.5O4 spinel by mechanical stress: a comparison of perfect versus imperfect structures as a cathode for Li-ion batteries10.1016/j.jpowsour.2016.04.086 ↗
12. Li0.5Ni0.5Mn2O4 spinel: its synthesis, structure and high pressure properties10.1016/j.jallcom.2017.06.137 ↗
13. Phase stability of post-spinel compound AMn2O4 (A = Li, Na, or Mg) and its application as a rechargeable battery cathode10.1021/cm401250c ↗
14. X-ray line broadening from field aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
15. Crystallinity control of a nanostructured LiNi0.5Mn1.5O4 spinel via polymer-assisted synthesis: a method for improving its rate capability and performance in 5 V lithium batteries10.1002/adfm.200500892 ↗
16. Microstructural parameters from X-ray diffraction peak broadening10.1016/j.scriptamat.2004.05.007 ↗
17. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
18. Mechanically induced phase transformation of γ-Al2O3 into α-Al2O3. Access to structurally disordered γ-Al2O3 with a controllable amount of pentacoordinated Al sites10.1021/jp206077r ↗
19. Nonequilibrium structure of Zn2SnO4 spinel nanoparticles10.1039/c2jm15427g ↗
20. Synthesis and electrochemistry of LiNixMn2−xO410.1149/1.1837386 ↗
21. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
22. Enhanced Li+ ion transport in LiNi0.5Mn1.5O4 through control of site disorder10.1039/c2cp43007j ↗
23. Porous LiNi0.5Mn1.5O4 microspheres with different pore conditions: preparation and application as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2014.03.047 ↗
24. Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery: positive (100) surfaces in high-voltage spinel system10.1016/j.jpowsour.2015.09.066 ↗
25. Improving the rate capability of high voltage lithium-ion battery cathode material LiNi0.5Mn1.5O4 by ruthenium doping10.1016/j.jpowsour.2014.05.110 ↗
26. Electrochemical properties of nonstoichiometric LiNi0.5Mn1.5O4−δ thin-film electrodes prepared by pulsed laser deposition10.1149/1.2741157 ↗
27. An artificial solid electrolyte interphase enables the use of a LiNi0.5Mn1.5O4 5 V cathode with conventional electrolytes10.1002/aenm201300378 ↗
28. Spinel LiNi0.5Mn1.5O4 cathode for rechargeable lithium-ion batteries: Nano vs micro, ordered phase (P4332) vs disordered phase (Fd-3m)10.1007/s12274-013-0343-5 ↗
29. LiNi0.5Mn1.5O4 porous nanorods as high-rate and long-life cathodes for Li-ion batteries10.1021/nl401072x ↗
30. Nano-LiNi0.5Mn1.5O4 spinel: a high power electrode for Li-ion batteries
31. Synthesis of spinel LiMn2O4 nanoparticles through one-step hydrothermal reaction10.1016/j.jpowsour.2007.07.039 ↗
32. High-power nanostructured LiMn2−xNixO4 high-voltage lithium-ion battery electrode materials: electrochemical impact of electronic conductivity and morphology10.1021/cm060729s ↗