journal article·2019-02

Highly accelerated oxygen reduction reaction kinetics in colloidal-processing-derived nanostructured lanthanum strontium cobalt ferrite/gadolinium-doped ceria composite cathode for intermediate-temperature solid oxide fuel cells

Kazuyoshi Sato, Chizuru Iwata, Naokatsu Kannari, Hiroya Abe

Publisher page

Abstract

Abstract Fully nanostructured La0.6Sr0.4Co0.2Fe0.8O3-δ/Gd0.2Ce0.8O1.9 [lanthanum strontium cobalt ferrite (LSCF)/gadolinium-doped ceria (GDC)] composite cathode is successfully demonstrated with conventional powder processing using nanocomposite particles, grown via a colloidal-processing-based bottom-up approach, as starting material. The cathode/electrolyte interface adheres well at a relatively low temperature of 900 °C because of the promoted surface diffusion of constituent elements by the higher surface energy of the nano-sized particles. By contrast, successful fabrication of a nanostructured porous cathode composed of uniformly distributing LSCF and GDC grains with a diameter of 50–70 nm strongly supports the prevented grain growth and pore closure by the co-existing hetero-phases in the composite particles acting as bulk diffusion barrier of each other's constituents during sintering. The nanocomposite cathode exhibits quite low area-specific polarization resistances for oxygen reduction reaction (ORR) of 0.127, 0.054, 0.032, 0.015 and 0.009 Ω cm2 at 600, 650, 700, 750 and 800 °C, respectively. These are significantly lower than those reported in the literature. The highly accelerated ORR kinetics contribute directly to the very high power densities of the anode-supported cells of 0.40, 0.77, 1.40, 2.32, and 3.29 W cm−2 at 600, 650, 700, 750, and 800 °C, respectively, with a cell voltage at 0.7 V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Materials for fuel-cell technologies10.1038/35104620 ↗
2. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
3. Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications10.1016/j.jpowsour.2003.09.024 ↗
4. Investigating oxygen surface exchange kinetics of La0.8Sr.20MnO3-δ and La0.6Sr0.4Co0.2Fe0.8O3-δ using an isotopic tracer10.1149/1.2952542 ↗
5. Mixed ionic-electronic conductivity of La1−xSrxCo1−yFeyO3−δperovskite-type oxides10.1016/0025-5408(88)90224-3 ↗
6. Influence of constituent metal cations in substituted LaCoO3 on mixed conductivity and oxygen permeability10.1016/0167-2738(91)90034-9 ↗
7. Materials design for perovskite SOFC cathodes10.1007/s00706-009-0153-3 ↗
8. Evaluation of La0.6Sr0.4Co0.2Fe0.8O3-Gd0.1Ce0.9O1.95 composite cathode with three dimensional microstructure reconstruction10.1016/j.jpowsour.2016.12.113 ↗
9. Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction10.1016/j.ssi.2004.02.026 ↗
10. Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C10.1016/S0167-2738(99)00319-7 ↗
11. Electrochemical performance of (La,Sr)(Co,Fe)O3–(Ce,Gd)O3 composite cathodes10.1016/S0167-2738(02)00102-9 ↗
12. Optimisation of composite cathodes for intermediate temperature SOFC applications10.1016/S0167-2738(99)00108-3 ↗
13. Characterization of electrical properties of GDC doped A-site deficient LSCF based composite cathode using impedance spectroscopy10.1016/j.jpowsour.2007.03.040 ↗
14. Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte10.1016/j.ijhydene.2008.04.034 ↗
15. Performance stability and degradation mechanism of La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes under solid oxide fuel cells operation conditions10.1016/j.ijhydene.2014.03.077 ↗
16. A stability study of impregnated LSCF–GDC composite cathodes of solid oxide fuel cells10.1016/j.jallcom.2013.05.021 ↗
17. One dimensional La0.8Sr0.2Co0.2Fe0.8O3−δ/Ce0.8Gd0.2O1.9 nanocomposite cathodes for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2012.07.013 ↗
18. La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells10.1016/j.jpowsour.2010.02.049 ↗
19. Liquid plasma sprayed nano-network La0.4Sr0.6Co0.2Fe0.8O3/Ce0.8Gd0.2O2 composite as a high-performance cathode for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2016.07.108 ↗
20. Surface Capping-Assisted Hydrothermal Growth of Gadolinium-Doped CeO2 Nanocrystals Dispersible in Aqueous Solutions10.1021/la502861k ↗
21. The Scherrer Formula for X-Ray Particle Size Determination10.1103/PhysRev.56.978 ↗
22. Sintering behaviour of La1−xSrxCo0.2Fe0.8O3−δ (0.3≤x≤0.8) mixed conducting materials10.1016/j.jeurceramsoc.2009.04.003 ↗
23. Carbonate Co-precipitation of Gd2O3-doped CeO2 solid solution nano-particles10.1016/j.msea.2004.05.071 ↗
24. High-performance lanthanum-ferrite-based cathode for SOFC10.1016/j.ssi.2004.09.007 ↗
25. Fabrication and characterization of solid oxide fuel cell cathodes made from nano-structured LSCF–SDC composite feedstock10.1016/j.jpowsour.2013.03.040 ↗
26. LSCF–SDC core–shell high-performance durable composite cathode10.1016/j.jpowsour.2009.06.079 ↗
27. Simner · Electrochem. Solid State Lett. · 2006 · 9 · A47810.1149/1.2266160 ↗
28. Effect of sintering temperature on the performance of composite La0.6Sr0.4Co0.2Fe0.8O3-Ce0.9Gd0.1O2 cathode for solid oxide fuel cells10.1007/s10832-018-0114-5 ↗
29. Electrochemical performance of intermediate temperature micro-tubular solid oxide fuel cells using porous ceria barrier layers10.1016/j.ceramint.2015.02.093 ↗
30. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: Part I. Variation of composition10.1016/j.ssi.2005.03.009 ↗
31. Ni–YSZ-supported tubular solid oxide fuel cells with GDC interlayer between YSZ electrolyte and LSCF cathode10.1016/j.ijhydene.2014.06.103 ↗
32. Multilayer tape-casting method for anode supported planar SOFCs10.1016/S1464-2859(07)70332-2 ↗
33. Han · J. Power Sources · 2012 · 195 · 15710.1016/j.jpowsour.2012.06.087 ↗