In situ visualization of Li concentration in all-solid-state lithium ion batteries using time-of-flight secondary ion mass spectrometry
Source abstract
Abstract
Abstract Lithium ion batteries (LIBs) are the most important energy storage devices. Novel methods for directly characterizing the behavior of Li ions during battery operations are highly coveted for understanding the fundamental working principles of the batteries and improving their device performances. In this study, we developed a novel method to visualize the change in Li ion distribution in the electrodes of all-solid-state (ASS) LIBs based on the time-of-flight secondary ion mass spectrometry technique with an in situ electrical measurement system. We succeeded in directly visualizing the decrease/increase of Li concentration in the cathode composite electrode during the charging/discharging cycles. Our method paves the way to characterize the fundamental aspects of ASS LIBs for improving device performance, including the evaluation of Li-depleted regions, visualization of the conductive paths and analysis of the causes of device degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Nano-scale simultaneous observation of Li-Concentration profile and Ti-, O electronic structure changes in an all-solid-state Li-Ion battery by spatially-resolved electron energy-loss spectroscopy10.1016/j.jpowsour.2014.04.154 ↗
4. In situ atomic force microscopy studies on lithium (de)intercalation-induced morphology changes in LixCoO2 micro-machined thin film electrodes10.1016/j.jpowsour.2012.09.017 ↗
5. Atomic level changes during capacity fade in highly oriented thin films of cathode material LiCoPO410.1039/C6TA10084H ↗
6. Lithium insertion into titanium phosphates, silicates, and sulfates10.1021/cm0201798 ↗
7. Evolution of phase transformation behavior in Li(Mn1.5Ni0.5)O4 cathodes studied by in situ XRD10.1149/1.3596376 ↗
8. X-ray absorption spectroscopic study on the electronic structure of Li1-xCoPO4 electrodes as 4.8 V positive electrodes for rechargeable lithium ion batteries10.1021/jp050569s ↗
9. Development of in situ cross-sectional Raman imaging of LiCoO2 cathode for Li-ion battery10.5796/electrochemistry.83.993 ↗
10. Electric potential gradient at the buried interface between lithium-ion battery electrodes and the SEI observed using photoelectron spectroscopy10.1021/acs.jpclett.6b00391 ↗
11. Internal potential mapping of charged solid-state-lithium ion batteries using in situ Kelvin probe force microscopy10.1039/C6NR07971G ↗
12. Can we detect Li K X-ray in lithium compounds using energy dispersive spectroscopy?10.1002/sca.21302 ↗
13. Chemical-state imaging of Li using scanning Auger electron microscopy10.1016/j.elspec.2013.03.001 ↗
14. Direct mapping of Li distribution in electrochemically lithiated graphite anodes using scanning Auger electron microscopy10.1016/j.jpowsour.2013.09.121 ↗
15. KVV Auger spectrum of oxidized lithium10.1116/1.569245 ↗
16. Challenges for lithium species identification in complementary Auger and X-ray photoelectron spectroscopy10.1016/j.jpowsour.2015.04.144 ↗
17. Nanoscale chemical mapping of Li-ion battery cathode material by FIB-SEM and TOF-SIMS multi-modal microscopy10.1016/j.nanoen.2015.08.013 ↗
18. Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo1/3Ni1/3Mn1/3O210.1021/ja108588y ↗
19. A new kind of all-solid-state thin-film-type lithium-ion battery developed by applying a D.C. High voltage10.1016/j.elecom.2006.03.003 ↗
20. A novel all-solid-state thin-film-type lithium-ion battery with in-situ prepared electrode active materials
21. All solid battery with phosphate compounds made through sintering process10.1016/j.jpowsour.2007.06.227 ↗
22. Li-ion diffusion kinetics in LiCoPO4 thin films deposited on NASICON-type glass ceramic electrolytes by magnetron sputtering10.1016/j.jpowsour.2009.03.001 ↗
23. High-temperature behavior of all-solid-state battery using olivine cathodes and NASICON electrolytes
24. Phospho-olivins as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
25. Olivine LiCoPO4 as 4.8 V electrode material for lithium batteries10.1149/1.1390994 ↗
26. Fast Li+ ion conduction in Li2O-Al2O3-TiO2-SiO2-P2O2 glass-ceramics10.1111/j.1151-2916.1997.tb03070.x ↗
27. Recent progress in interfacial nanoarchitectonics in solid-state batteries10.1007/s10904-014-0127-8 ↗
28. Trench formation and lateral damage induced by gallium milling of silicon10.1016/j.apsusc.2008.05.083 ↗
29. Appendix C: 30 keV Ga ion range at 0 degrees