Enabling steady graphite anode cycling with high voltage, additive-free, sulfolane-based electrolyte: Role of the binder
Source abstract
Abstract
We demonstrate here the possibility of operating both high voltage spinel and high mass loading graphite electrodes in a 1 M LiPF6 in SL/DMC (1/1, wt/wt) electrolyte without the use of additive. A crucial point for practical graphite electrode operation is the use of the cheaper and environmentally friendly carboxymethyl cellulose (CMC)/styrene-butadiene rubber (SBR) combination instead of the PVDF-based electrodes used in most laboratory studies. With this type of anode we also show the operation of a full Li-ion cell operating at 4.5 V without any additive and show that most of the Li+ transport limitation observed in half-cells are in fact due to the Li metal counter electrode. The anode binder influence is to be considered for the development of high voltage electrolytes lacking good intrinsic SEI building properties, as the anode binder does not affect cathode performance, contrary to most additives. It opens the route for further improvement by use of SEI forming additives (molecular and salts), keeping in mind the requirement for the cathode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Synthesis and electrochemistry of LiNixMn2-xO410.1149/1.1837386 ↗
2. Olivine LiCoPO4 as 4.8 V electrode material for lithium batteries10.1149/1.1390994 ↗
3. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
4. Studies of lithium intercalation into carbons using nonaqueous electrochemical cells10.1149/1.2086855 ↗
5. New electrolyte compositions stable over the 0 to 5 V voltage range and compatible with the Li1+xMn2O4/carbon Li-ion cells10.1016/0167-2738(94)90418-9 ↗
6. Ionic liquids containing carbonate solvent as electrolytes for lithium ion cells10.1016/j.jpowsour.2004.06.027 ↗
7. High concentration dinitrile, 3-alkoxypropionitrile, and linear carbonate electrolytes enabled by vinylene and monofluoroethylene carbonate additives10.1149/2.016204jes ↗
8. Study of SEI layer formed on graphite anodes in PC/LiBOB electrolyte using IR spectroscopy10.1149/1.1756855 ↗
9. Lithium difluoro(oxalato)borate as additive to improve the thermal stability of lithiated graphite10.1149/1.3070581 ↗
10. Pure ionic liquid electrolytes compatible with a graphitized carbon negative electrode in rechargeable lithium-ion batteries10.1016/j.jpowsour.2006.02.077 ↗
11. LiFSI vs. LiPF6 electrolytes in contact with lithiated graphite: comparing thermal stabilities and identification of specific SEI-reinforcing additives10.1016/j.electacta.2013.03.171 ↗
12. Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-Nanowire Li-Ion battery anodes10.1021/la203712s ↗
13. Electrochemistry Communications Fluorinated electrolytes for Li-ion battery: an FEC-based electrolyte for high voltage LiNi0.5Mn1.5O4/graphite couple10.1016/j.elecom.2013.08.009 ↗
14. High-voltage electrolytes based on adiponitrile for Li-Ion batteries10.1149/1.3023084 ↗
15. Doped sulfone electrolytes for high voltage Li-ion cell applications10.1016/j.elecom.2009.05.020 ↗
16. Lithium salt solutions in mixed sulfone and sulfone-carbonate solvents: a walden plot analysis of the maximally conductive compositions10.1021/jp3067519 ↗
17. Note on an organic-electrolyte cell with a high voltage10.1149/1.2408081 ↗
18. Characteristics of sulfolane-based electrolytes for rechargeable lithium batteries10.1149/1.2113619 ↗
19. Lithium cycling efficiency and conductivity for high dielectric solvent/low viscosity solvent mixed systems10.1016/0013-4686(85)87019-5 ↗
20. Sulfone-based electrolytes for high-voltage Li-ion batteries10.1016/j.elecom.2009.03.020 ↗
21. Why do sulfone-based electrolytes show stability at high voltages? Insight from density functional theory10.1021/jz401726p ↗
22. Electrode/electrolyte interface in sulfolane-based electrolytes for Li ion batteries: a molecular dynamics simulation study10.1021/jp3054179 ↗
23. Oxidative stability and initial decomposition reactions of carbonate, sulfone, and alkyl phosphate-based electrolytes10.1021/jp400527c ↗
24. Properties of Li-graphite and LiFePO4 electrodes in LiPF6–sulfolane electrolyte10.1016/j.electacta.2011.04.105 ↗
25. An improved method for synthesis of lithium difluoro(oxalato)borate and effects of sulfolane on the electrochemical performances of lithium-ion batteries10.1016/j.electacta.2013.01.011 ↗
26. Study of the electrochemical characteristics of sulfonyl isocyanate/sulfone binary electrolytes for use in lithium-ion batteries10.1016/j.jpowsour.2011.11.065 ↗
27. Graphite/LiFePO4 lithium-ion battery working at the heat engine coolant temperature10.1016/j.jpowsour.2014.04.083 ↗
28. Sulfolane-based electrolyte for high voltage Li(Ni0.42Mn0.42Co0.16)O2 (NMC442)/Graphite pouch cells10.1149/2.0121508jes ↗
29. Improving sulfolane-based electrolyte for high voltage Li-ion cells with electrolyte additives10.1016/j.jpowsour.2016.06.008 ↗
30. An improved method for synthesis of lithium difluoro(oxalato)borate and effects of sulfolane on the electrochemical performances of lithium-ion batteries10.1016/j.electacta.2013.01.011 ↗
31. S. Solchenbach, M. Metzger, H.A. Gasteiger, Comparative Study of the Anodic and Cathodic Decomposition of Ethylene Carbonate, Vinylene Carbonate and Fluoroethylene Carbonate, Meet. Abstr. MA2015-02 362, 228th ECS Meeting, Phoenix, AZ, USA, Oct. 11-15, 2015 http://ma.ecsdl.org/content/MA2015-02/5/362.10.1149/MA2015-02/5/362 ↗
32. Metal oxides and oxysalts as anode materials for Li ion batteries10.1021/cr3001884 ↗
33. Capacity fading reason of LiNi0.5Mn1.5O4 with commercial electrolyte10.1007/s11581-012-0835-4 ↗
34. A perspective on the high-voltage LiMn1.5Ni0.5O4 spinel cathode for lithium-ion batteries10.1039/c3ee42981d ↗
35. Effect of mixtures of lithium hexafluorophosphate (LiPF6) and lithium bis(fluorosulfonyl)imide (LiFSI) as salts in Li[Ni1/3 Mn1/3 Co1/3]O2/Graphite pouch cells10.1149/2.0821501jes ↗
36. High-rate and high-energy-density lithium-ion battery anode containing 2D MoS2 nanowall and cellulose binder10.1021/am3022015 ↗
37. On the binding mechanism of CMC in Si negative electrodes for Li-ion batteries10.1016/j.elecom.2007.10.001 ↗
38. Influence of the carbonaceous conductive network on the electrochemical performance of ZnFe2O4 nanoparticles10.1016/j.jpowsour.2013.02.051 ↗
39. Silicon/graphite composite electrodes for high-capacity Anodes: influence of binder chemistry on cycling stability10.1149/1.2888173 ↗
40. Embedding tin nanoparticles in micron-sized disordered carbon for lithium- and sodium-ion anodes
41. Carbon coated ZnFe2O4 nanoparticles for advanced lithium-ion anodes10.1002/aenm.201200735 ↗
42. Surface film formation on a carbonaceous electrode: influence of the binder chemistry10.1016/j.jpowsour.2008.11.031 ↗
43. Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries10.1016/j.jpowsour.2006.03.073 ↗
44. Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?10.1016/S0378-7753(96)02547-5 ↗
45. Enhanced cycle life of Si anode for Li-Ion batteries by using modified elastomeric binder10.1149/1.1847685 ↗
46. Analysis of solid electrolyte interface formation reaction and surface deposit of natural graphite negative electrode employing polyacrylic acid as a binder10.1016/j.jpowsour.2013.08.083 ↗
47. A major constituent of brown algae for use in high-capacity Li-ion batteries10.1126/science.1209150 ↗
48. Comparative study of sodium polyacrylate and poly-(vinylidene fluoride) as binders for high capacity Si graphite composite negative electrodes in Li-Ion batteries10.1021/jp204817h ↗