journal article·2017-02Open access

Calculation of effective transport properties of partially saturated gas diffusion layers

Tomasz Bednarek, Georgios Tsotridis

Abstract

A large number of currently available Computational Fluid Dynamics numerical models of Polymer Electrolyte Membrane Fuel Cells (PEMFC) are based on the assumption that porous structures are mainly considered as thin and homogenous layers, hence the mass transport equations in structures such as Gas Diffusion Layers (GDL) are usually modelled according to the Darcy assumptions. Application of homogenous models implies that the effects of porous structures are taken into consideration via the effective transport properties of porosity, tortuosity, permeability (or flow resistance), diffusivity, electric and thermal conductivity. Therefore, reliable values of those effective properties of GDL play a significant role for PEMFC modelling when employing Computational Fluid Dynamics, since these parameters are required as input values for performing the numerical calculations. The objective of the current study is to calculate the effective transport properties of GDL, namely gas permeability, diffusivity and thermal conductivity, as a function of liquid water saturation by using the Lattice-Boltzmann approach. The study proposes a method of uniform water impregnation of the GDL based on the “Fine-Mist” assumption by taking into account the surface tension of water droplets and the actual shape of GDL pores.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Lattice Boltzmann Simulation Studies · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Review and comparison of approaches to proton exchange membrane fuel cell modeling10.1016/j.jpowsour.2005.01.003 ↗
2. A critical review of modeling transport phenomena in polymer-electrolyte fuel cells10.1149/2.0751412jes ↗
3. Review of computational heat and mass transfer modeling in polymer-electrolyte-membrane (PEM) fuel cells10.1016/j.energy.2008.04.015 ↗
4. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
5. Review of proton exchange membrane fuel cell models10.1016/j.ijhydene.2005.05.010 ↗
6. Fundamental models for fuel cell engineering10.1021/cr020718s ↗
7. Microfluidics: fluid physics at the nanoliter scale10.1103/RevModPhys.77.977 ↗
8. Computational modelling of polymer electrolyte membrane (PEM) fuel cells: challenges and opportunities10.1016/j.energy.2006.08.007 ↗
9. Fundamentals of computational fluid dynamics10.1115/1.1483340 ↗
10. Understanding impacts of catalyst-layer thickness on fuel-cell performance via mathematical modeling10.1149/2.1161607jes ↗
11. Understanding liquid-water management in PEFCs using x-ray computed tomography and modeling10.1149/06917.1253ecst ↗
12. A multi-scale approach to material modeling of fuel cell diffusion media10.1016/j.ijheatmasstransfer.2010.12.003 ↗
13. Determination of material properties of gas diffusion layers: experiments and simulations using phase contrast tomographic microscopy10.1149/1.3176876 ↗
14. Effect of liquid water on transport properties of the gas diffusion layer of polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2011.01.146 ↗
15. Estimating effective thermal conductivity in carbon paper diffusion media10.1016/j.ces.2010.03.047 ↗
16. Estimating the thermal conductivity and diffusion coefficient of the microporous layer of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2012.02.003 ↗
17. Mukherjee · 2012
18. 3D phase-differentiated GDL microstructure generation with binder and PTFE distributions10.1016/j.ijhydene.2011.12.050 ↗
19. Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging10.1016/j.jpowsour.2013.12.062 ↗
20. X-ray computed tomography of gas diffusion layers of PEM fuel cells: calculation of thermal conductivity10.1016/j.ijhydene.2010.01.085 ↗
21. X-ray computed tomography of gas diffusion layers of {PEM} fuel cells: segmentation of the microporous layer10.1016/j.jpowsour.2013.01.179 ↗
22. Imaging of membrane electrode assemblies of proton exchange membrane fuel cells by X-ray computed tomography10.1016/j.jpowsour.2010.09.020 ↗
23. Study of effective transport properties of fresh and aged gas diffusion layers10.1016/j.jpowsour.2015.03.132 ↗
24. Modeling of two-phase behavior in the gas diffusion medium of PEFCs via full morphology approach10.1149/1.2472547 ↗
25. Comparison of a lattice-boltzmann model, a full-morphology model, and a pore network model for determining capillary pressure–saturation relationships10.2136/vzj2004.0114 ↗
26. Pore-morphology-based simulation of drainage in totally wetting porous media10.1016/S0309-1708(00)00056-7 ↗
27. Lattice Boltzmann simulation of water and gas flow in porous gas diffusion layers in fuel cells reconstructed from micro-tomography10.1016/j.camwa.2012.08.006 ↗
28. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: effect of local saturation and application to macroscopic continuum models10.1016/j.jpowsour.2015.07.034 ↗
29. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: effect of local saturation and application to macroscopic continuum models10.1016/j.jpowsour.2015.07.034 ↗
30. Mesoscopic modeling of two-phase behavior and flooding phenomena in polymer electrolyte fuel cells10.1016/j.electacta.2009.06.066 ↗
31. Theory of the lattice Boltzmann method: from the Boltzmann equation to the lattice Boltzmann equation10.1103/PhysRevE.56.6811 ↗
32. A critical review of the pseudopotential multiphase lattice Boltzmann model: methods and applications10.1016/j.ijheatmasstransfer.2014.04.032 ↗
33. A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems10.1103/PhysRev.94.511 ↗
34. Lattice Boltzmann model for simulating flows with multiple phases and components10.1103/PhysRevE.47.1815 ↗
35. Simulation of nonideal gases and liquid-gas phase transitions by the lattice Boltzmann equation10.1103/PhysRevE.49.2941 ↗
36. Pressure tensor calculation in a class of nonideal gas lattice Boltzmann models10.1103/PhysRevE.77.066702 ↗
37. Evaluation of two lattice Boltzmann models for multiphase flows10.1006/jcph.1997.5839 ↗
38. Evaluation of three lattice Boltzmann models for multiphase flows in porous media10.1016/j.camwa.2010.06.034 ↗
39. Immiscible cellular-automaton fluids10.1007/BF01019743 ↗
40. Lattice Boltzmann model of immiscible fluids10.1103/PhysRevA.43.4320 ↗
41. Mesoscopic modeling of multiphysicochemical transport phenomena in porous media10.1155/2010/142879 ↗
42. Application of lattice Boltzmann model to multiphase flows with phase transition10.1016/S0010-4655(00)00098-9 ↗
43. Pore-scale mass and reactant transport in multiphase porous media flows10.1017/jfm.2011.268 ↗
44. Sigracet®GDL34&35 Series - Datasheet, 2013.
45. Pant · 2011
46. Poling · 2001
47. Yaws · 1999
48. Fraunhofer ITWM · 2014