Spray deposition of Nafion membranes: Electrode-supported fuel cells
Source abstract
Abstract
Abstract Fuel cells are a key technology for the successful transition towards a hydrogen society. In order to accelerate fuel cell commercialization, improvements in performance are required. Generally, polymer electrolyte membrane fuel cells (PEFCs) are membrane-supported; the electrocatalyst layer is sprayed onto both sides of the membrane, and sandwiched between carbon-based gas diffusion layers (GDLs). In this work we redesign the membrane electrode assembly (MEA) and fabricate an electrode-supported PEFC. First the electrocatalyst layer is sprayed onto the GDL, and then Nafion dispersion is sprayed over the top of this to form a thin membrane. This method has the advantage of simplifying the fabrication process, allowing the fabrication of extremely thin electrolyte layers (down to ∼10 μm in this case), and reducing the amount of ionomer required in the cell. Electrode-supported PEFCs operate at significantly increased power density compared to conventional membrane-supported PEFCs, with a maximum of 581 mW/cm2 at 80 °C (atmospheric pressure, air at the cathode). Impedance spectroscopy confirmed that the origin of the improved performance was an 80% reduction in the membrane resistance due the thinner Nafion layer. This novel fabrication method is a step towards cheaper, thinner, fully printable PEFCs with high power density and efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. An overview of 3D printing technologies for food fabrication10.1007/s11947-015-1528-6 ↗
2. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences10.1021/ac403397r ↗
3. Jet printing of flexible displays10.1016/S1369-7021(06)71445-6 ↗
4. Multilayer transfer printing for pixelated, multicolor quantum dot light-emitting diodes10.1021/acsnano.5b06387 ↗
5. Technologies for printing sensors and electronics over large flexible substrates : a review10.1109/JSEN.2014.2375203 ↗
6. Electron field emission from water-based carbon nanotube inks10.1149/2.0051504jss ↗
7. Busby · 2005
8. Bagotsky · 2009
9. Larminie · 2003
10. Fabrication of catalyst-coated membrane-electrode assemblies by doctor blade method and their performance in fuel cells10.1016/j.jpowsour.2010.05.004 ↗
11. Cost effective cation exchange membranes: a review10.1016/j.cherd.2011.10.015 ↗
12. Peighambardoust · 2010
13. Characterization of a graphene oxide membrane fuel cell10.1016/j.jpowsour.2014.08.071 ↗
14. In-situ ESEM and EELS observation of water uptake and ice formation in multilayer graphene oxide10.1038/srep11807 ↗
15. Tunable mixed ionic/electronic conductivity and permittivity of graphene oxide paper for electrochemical energy conversion10.1021/acsami.6b01670 ↗
16. High Temperature proton conduction in nanocellulose membranes: paper fuel cells10.1021/acs.chemmater.6b01990 ↗
17. Toyota mirai fuel cell electric vehicle relies on gore technology
18. Advanced composite polymer electrolyte fuel cell membranes
19. Development of thin, reinforced PEMFC membranes through understanding of structure-property-performance relationship10.1149/05002.0051ecst ↗
20. Electrode supported solid oxide fuel cells: electrolyte films prepared by DC magnetron sputtering10.1016/S0167-2738(97)00248-8 ↗
21. Anode- versus cathode-supported solid oxide fuel cell : effect of cell design on the stack performance10.1016/S1452-3981(23)04863-0 ↗
22. Simplified processing of anode-supported thin film planar solid oxide fuel cells10.1016/j.jeurceramsoc.2004.01.018 ↗
23. Zuo · 2012
24. Fabrication of thin electrolytes for second-generation solid oxide fuel cells10.1016/S0167-2738(00)00624-X ↗
25. Effects of operating parameters on hydrogen crossover rate through Nafion® membranes in polymer electrolyte membrane fuel cells10.1016/j.renene.2013.01.046 ↗
26. Direct deposition of proton exchange membranes enabling high performance hydrogen fuel cells10.1039/C5TA01341K ↗
27. Defective nitrogen-doped graphene foam: a metal-free, non-precious electrocatalyst for the oxygen reduction reaction in acid10.1149/2.095404jes ↗
28. Pt-decorated graphene-like foam for electrochemical oxygen reduction with high mass activity10.1149/05801.1751ecst ↗
29. Graphene oxide membrane fuel cells: utilizing of a new class of ionic conductor10.1149/06403.0441ecst ↗
30. Characterization of membrane electrode assemblies in polymer electrolyte fuel cells using a. c. impedance spectroscopy q10.1023/A:1020551609230 ↗
31. Application of electrochemical impedance spectroscopy for fuel cell characterization: PEFC and oxygen reduction reaction in alkaline solution10.1002/fuce.200800071 ↗
32. Ac impedance study of a proton exchange membrane fuel cell stack under various loading conditions10.1115/1.3207871 ↗
33. Anode and cathode overpotentials and temperature profiles in a PEMFC10.1016/j.jpowsour.2011.09.042 ↗
34. Measurement of catalyst layer electrolyte resistance in PEFCs using electrochemical impedance spectroscopy10.1149/1.1888367 ↗
35. Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells10.1016/S0378-7753(02)00112-X ↗
36. Steady-state and EIS investigations of hydrogen electrodes and membranes in polymer electrolyte fuel cells10.1149/1.2172561 ↗
37. Chemical and morphological properties of solution-cast perfluorosulfonated ionomers10.1021/ma00183a025 ↗
38. Durable and high performance Nafion membrane prepared through high-temperature annealing methodology10.1016/j.memsci.2010.06.016 ↗