journal article·2016-09

Fatigue in 0.5Li2MnO3:0.5Li(Ni1/3Co1/3Mn1/3)O2 positive electrodes for lithium ion batteries

Lars Riekehr, Jinlong Liu, Björn Schwarz, Florian Sigel, Ingo Kerkamm, Yongyao Xia, Helmut Ehrenberg

Publisher page

Abstract

Abstract Two different Li-rich nickel–cobalt–manganese-oxide (Li-rich NCM) active materials with the same nominal composition 0.5Li2MnO3:0.5Li(Ni1/3Co1/3Mn1/3)O2 but different pristine nano structure have been analyzed structurally and electrochemically in different cycling states. For structural characterization, transmission electron microscopy (TEM) and high resolution synchrotron powder diffraction (S-XRD) experiments were conducted. The changes in structure with increasing cycle number are correlated with characteristic features in the corresponding electrochemical dQ/dV-profiles that were obtained by galvanostatically cycling the two different active materials. The presented data demonstrates that structural changes upon cycling, e.g. LiMnO2 and spinel formation, strongly depend on the degree oxygen is involved in the reversible charge compensation for delithiation/lithiation. According to our data, firstly a twin-like environment with nanometer dimensions is formed within the R-3m matrix during the initial cycle, which then gradually transforms into a spinel-like structure with increasing cycle number. As another result, we can show that Li2MnO3 to LiMnO2 transformation is not directly dependent in the irreversible oxygen loss in the first cycle but more importantly on transition metal migration. A model is presented explaining the dependency of LiMnO2 and spinel formation on the ability of Li-rich active materials to include oxygen in the charge compensation process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. LixCoO2 (0<x<−1): a new cathode material for batteries of high energy density10.1016/0025-5408(80)90012-4 ↗
2. Electrochemistry and structural chemistry of LiNiO2 (R-3m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
3. In-situ X-ray absorption spectroscopic study on variation of electronic transitions and local structure of LiNi1/3Co1/3Mn1/3O2 cathode material during electrochemical cycling10.1021/cm048027v ↗
4. Changes in the crystal and electronic structure of LiCoO2 and LiNiO2 upon Li intercalation and de-intercalation10.1039/b901200a ↗
5. Nonrigid band behavior of the electronic structure of LiCoO2 thin film during electrochemical Li deintercalation10.1021/cm501480b ↗
6. Positive electrode materials for Li-ion and Li-batteries†10.1021/cm902696j ↗
7. Electrochemical activities in Li2MnO310.1149/1.3110803 ↗
8. Atomic structure of Li2MnO3 after partial delithiation and Re-Lithiation10.1002/aenm.201200842 ↗
9. Crystallographic and magnetic structure of Li2MnO310.1016/0022-4596(88)90305-2 ↗
10. Mechanism of electrochemical activity in Li2MnO310.1021/cm030047u ↗
11. Study of the electrochemical behavior of the “inactive” Li2MnO310.1016/j.electacta.2012.05.144 ↗
12. High-capacity lithium insertion materials of lithium nickel manganese oxides for advanced lithium-ion batteries: toward rechargeable capacity more than 300 mAhg−110.1039/c0jm04325g ↗
13. Unravelling structural ambiguities in lithium-and manganese-rich transition metal oxides10.1038/ncomms9711 ↗
14. Local structure and composition studies of Li1.2Ni0.2Mn0.6O2 by analytical electron microscopy10.1016/j.jpowsour.2007.11.077 ↗
15. Effect of pristine nanostructure on first cycle electrochemical characteristics of lithium-rich lithium–nickel–cobalt–manganese-oxide cathode ceramics for lithium ion batteries10.1016/j.jpowsour.2015.11.082 ↗
16. Advances in manganese-oxide ‘composite’electrodes for lithium-ion batteries10.1039/b417616m ↗
17. Li2MnO3-stabilized LiMO2 (M= Mn, Ni, Co) electrodes for lithium-ion batteries10.1039/b702425h ↗
18. Review—Li-Rich layered oxide cathodes for next-generation Li-Ion batteries: chances and challenges10.1149/2.0111514jes ↗
19. Factors influencing the irreversible oxygen loss and reversible capacity in layered Li[Li1/3Mn2/3]O2-Li[M]O2 (M= Mn0.5−yNi0.5−yCo2y and Ni1−yCoy) solid solutions10.1021/cm070389q ↗
20. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
21. Mechanisms associated with the “plateau” observed at high voltage for the overlithiated Li1.12 (Ni0.425Mn0.425Co0.15)0.88O2 system10.1021/cm070435m ↗
22. Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li [Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗
23. First evidence of manganese–nickel segregation and densification upon cycling in Li-rich layered oxides for lithium batteries10.1021/nl4019275 ↗
24. Reversible oxygen participation to the redox processes revealed for Li1.20Mn0.54Co0.13Ni0.13O210.1149/2.038306jes ↗
25. Reversible anionic redox chemistry in high-capacity layered-oxide electrodes10.1038/nmat3699 ↗
26. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
27. Structural evolution of layered Li1.2Ni0.2Mn0.6O2 upon electrochemical cycling in a Li rechargeable battery10.1039/c0jm01971b ↗
28. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
29. Direct observation of the partial formation of a framework structure for Li-rich layered cathode material Li[Ni0.17Li0.2Co0.07Mn0.56]O2 upon the first charge and discharge10.1016/j.jpowsour.2010.12.079 ↗
30. Improving the electrochemical performance of layered lithium-rich transition-metal oxides by controlling the structural defects10.1039/C3EE41664J ↗
31. General synthesis of x Li2MnO3·(1−x) LiMn1/3Ni1/3Co1/3O2 nanomaterials by a molten-salt method: towards a high capacity and high power cathode for rechargeable lithium batteries10.1039/c2jm35026b ↗
32. Enhanced electrochemical performance of Li-rich layered cathode materials by surface modification with P2O510.1016/j.elecom.2014.10.009 ↗
33. The new material science powder diffraction beamline at ALBA synchrotron
34. The MYTHEN detector for X-ray powder diffraction experiments at the Swiss Light Source10.1107/S0909049510026051 ↗
35. Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries10.1016/S0013-4686(02)00593-5 ↗
36. Electrochemical cycling-induced spinel formation in high-charge-capacity orthorhombic LiMnO210.1149/1.1392457 ↗
37. The layered intercalation compounds Li (Mn1−yCoy)O2: positive electrode materials for lithium–ion batteries10.1006/jssc.1999.8216 ↗
38. Study of the electrochemical behavior of the “inactive” Li2MnO310.1016/j.electacta.2012.05.144 ↗
39. Lithium–manganese–nickel-oxide electrodes with integrated layered–spinel structures for lithium batteries10.1016/j.elecom.2006.09.014 ↗
40. Critical role of oxygen evolved from layered Li–Excess metal oxides in lithium rechargeable batteries10.1021/cm3005634 ↗
41. The role of composition in the atomic structure, oxygen loss, and capacity of layered Li–Mn–Ni oxide cathodes10.1039/C3TA12440A ↗
42. Investigating phase transformation in the Li1.2Co0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold (4.5 V) via magnetic, X-ray diffraction and electron microscopy studies10.1039/c3ta10304h ↗
43. Evolutions of Li1.2Mn0.61Ni0.18Mg0.01O2 during the initial charge/discharge cycle studied by advanced electron microscopy10.1021/cm301140g ↗
44. Structural evolution and the capacity fade mechanism upon long-term cycling in Li-rich cathode material10.1039/c2cp42068f ↗
45. Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction10.1016/j.jpowsour.2012.11.144 ↗
46. Synthesis, characterization and electrochemistry of lithium battery electrodes: xLi2MnO3:(1−x)LiMn0.333Ni0.333Co0. 333O2 (0≤x≤0.7)10.1021/cm801245r ↗
47. High-energy ‘composite’layered manganese-rich cathode materials via controlling Li2MnO3phase activation for lithium-ion batteries10.1039/c2cp40745k ↗
48. Microtwinning in microcrystalline silicon and its effect on grain-size measurements10.1103/PhysRevB.67.045312 ↗
49. Electrochemical and structural study of the layered,“Li-excess” lithium-ion battery electrode material Li [Li1/9Ni1/3Mn5/9]O210.1021/cm900279u ↗
50. The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3:(1−x)LiMn0.5Ni0.5O2 electrodes10.1016/j.elecom.2004.08.002 ↗
51. High-energy cathode materials (Li2MnO3–LiMO2) for lithium-ion batteries10.1021/jz400032v ↗
52. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
53. Understanding the role of Ni in stabilizing the lithium-rich high-capacity cathode material Li[NixLi(1−2x)/3Mn(2−x)/3]O2 (0≤x≤0.5)10.1021/cm501664y ↗
54. Electrochemical activity of Li in the transition-metal sites of O3 Li[Li(1−2x)/3Mn(2−x)/3Nix]O210.1149/1.1783113 ↗
55. Examining hysteresis in composite xLi2MnO3:(1–x)LiMO2 cathode structures10.1021/jp312658q ↗
56. Quantifying hysteresis and voltage fade in x Li2MnO3:(1–x)LiMn0.5Ni0.5O2 electrodes as a function of Li2MnO3 content10.1149/2.049403jes ↗
57. Re-entrant lithium local environments and defect driven electrochemistry of Li-and Mn-Rich Li-Ion battery cathodes10.1021/ja511299y ↗
58. Correlating hysteresis and voltage fade in lithium-and manganese-rich layered transition-metal oxide electrodes10.1016/j.elecom.2013.04.022 ↗
59. Role of electronic structure in the susceptibility of metastable transition-metal oxide structures to transformation10.1021/cr020733x ↗
60. First principles computational materials design for energy storage materials in lithium ion batteries10.1039/b901825e ↗