journal article·2010-09

Sulfonated polyimide hybrid membranes for polymer electrolyte fuel cell applications

Ken-ichi Okamoto, Kazuaki Yaguchi, Hajime Yamamoto, Kangcheng Chen, Nobutaka Endo, Mitsuru Higa, Hidetoshi Kita

Journal of Power Sources· Volume 195· Issue 18
Publisher page

Abstract

Abstract Sulfonated Si-MCM-41 (SMCM) with an ion exchange capacity (IEC) of 2.3 mequiv. g−1 was used as a hydrophilic and proton-conductive inorganic component. Sulfonated polyimide (SPI) based on 1,4,5,8-naphthalene tetracarboxylic dianhydride and 2,2′-bis(3-sulfophenoxy) benzidine was used as a host membrane component. The SMCM/SPI hybrid membrane (H1) with 20 wt% loading of SMCM and an IEC of 1.90 mequiv. g−1 showed the high mechanical tensile strength and the slightly higher water vapor sorption than the host SPI membrane (M1) with an IEC of 1.86 mequiv. g−1. H1 and M1 showed anisotropic membrane swelling with about 10 times larger swelling in thickness direction than in plane one. The proton conductivity at 60 °C of H1 was lower in water than that of M1, but comparable at 30% RH. At 90 °C, H1 showed the rather lower performance of polymer electrolyte fuel cell (PEFC) at 82% RH than M1 and fairly better performance at 30% RH. On the other hand, at 110 °C and low humidity less than 50% RH, H1 showed the much better PEFC performance than M1 and Nafion 112. This was due to the promoted back diffusion of produced water by the superior water-holding capacity of SMCM. The SMCM/SPI hybrid membranes have high potential for PEFCs at higher temperatures and lower humidities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Savadogo · J. New Mater. Electrochem. Syst. · 1998 · 1 · 47
2. Mauritz · Chem. Rev. · 2004 · 104 · 453510.1021/cr0207123 ↗
3. Rikukawa · Prog. Polym. Sci. · 2000 · 25 · 146310.1016/S0079-6700(00)00032-0 ↗
4. Kerres · J. Membr. Sci. · 2001 · 185 · 310.1016/S0376-7388(00)00631-1 ↗
5. Kreuer · J. Membr. Sci. · 2001 · 185 · 2910.1016/S0376-7388(00)00632-3 ↗
6. Li · Chem. Mater. · 2003 · 15 · 489610.1021/cm0310519 ↗
7. Hickner · Chem. Rev. · 2004 · 145 · 458710.1021/cr020711a ↗
8. Harrison · Fuel Cells · 2005 · 5 · 20110.1002/fuce.200400084 ↗
9. Yin · Polym. J. · 2006 · 38 · 19710.1295/polymj.38.197 ↗
10. Marestin · Adv. Polym. Sci. · 2008 · 216 · 185
11. Goto · Polym. J. · 2009 · 41 · 9510.1295/polymj.PJ2008220 ↗
12. Asano · J. Am. Chem. Soc. · 2006 · 128 · 176210.1021/ja0571491 ↗
13. Miyatake · J. Am. Chem. Soc. · 2007 · 129 · 387910.1021/ja0672526 ↗
14. Roy · Polymer · 2008 · 49 · 503710.1016/j.polymer.2008.08.046 ↗
15. Einsla · Chem. Mater. · 2008 · 20 · 563610.1021/cm801198d ↗
16. Bai · J. Membr. Sci. · 2008 · 313 · 7510.1016/j.memsci.2007.12.062 ↗
17. Lee · J. Membr. Sci. · 2008 · 313 · 19910.1016/j.memsci.2008.01.004 ↗
18. Sutou · J. Polym. Sci., Chem. Ed. · 2009 · 44 · 146310.1002/pola.23123 ↗
19. Endo · J. Electrochem. Soc. · 2009 · 156 · B62810.1149/1.3097180 ↗
20. Hu · Polymer · 2009 · 50 · 293310.1016/j.polymer.2009.04.040 ↗
21. K. Yaguchi, K. Chen, N. Endo, M. Higa, K. Okamoto, J. Power Sources, in press.
22. Alberti · Annu. Rev. Mater. Res. · 2003 · 33 · 12910.1146/annurev.matsci.33.022702.154702 ↗
23. Anilkumar · Electrochem. Commun. · 2006 · 8 · 13310.1016/j.elecom.2005.10.025 ↗
24. Woo · Electrochim. Acta · 2006 · 51 · 605110.1016/j.electacta.2006.02.043 ↗
25. Marschall · Micropor. Mesopor. Mater. · 2007 · 99 · 19010.1016/j.micromeso.2006.08.037 ↗
26. Marshall · Chem. Mater. · 2007 · 19 · 640110.1021/cm071164i ↗
27. Cano-Serrano · Langmuir · 2003 · 19 · 762110.1021/la034520u ↗