journal article·2023-02

Liquid biofuels for solid oxide fuel cells: A review

Nanqi Li, Bo Liu, Lichao Jia, Dong Yan, Jian Li

Publisher page

Abstract

Liquid biofuels (LBFs) that are renewable and sulfur-free, are one important part of future energy supplements. The advantage of ready availability of LBFs with high efficiencies and clean emissions is highly favored by solid oxide fuel cells (SOFCs), and wide applications in power generation, transportation, and aviation are expected. Direct and indirect utilizations are believed to have great significance in using short-chain and long-chain LBFs, respectively. Still, an overall summarization relevant to these fuels’ usage, including both SOFC technologies and reforming processes, is messy and incomplete. Therefore, significant work has been done to integrate this information into a review. Here, the catalogs of LBFs are summarized, and SOFC fundamentals are discussed to offer basic views of LBFs utilization. SOFC anodes and reforming catalysts are thoroughly discussed for direct and indirect utilization, respectively, and approaches for enhancements around the problems such as carbon deposition and active metal sintering are also included.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Preparation of lanthanum strontium cobalt oxide powder by a modified sol-gel method10.17576/mjas-2016-2006-26 ↗
2. Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy10.1016/S1364-0321(02)00014-X ↗
3. Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs10.1016/j.ijhydene.2011.01.151 ↗
4. Exergy analysis of methanol from the sewage sludge process10.1016/S0196-8904(02)00027-4 ↗
5. Biodiesel production: a review1Journal series #12109, agricultural research division, institute of agriculture and natural resources, University of Nebraska–Lincoln.110.1016/S0960-8524(99)00025-5 ↗
6. Simultaneous saccharification and fermentation of citrus peel waste by Saccharomyces cerevisiae to produce ethanol10.1016/j.procbio.2007.09.006 ↗
7. Solid oxide fuel cells in combination with biomass gasification for electric power generation10.1016/j.cjche.2020.01.018 ↗
8. Catalytic materials for biofuel conversion10.1080/09506608.2017.1423158 ↗
9. Energy production from biomass (part 1): overview of biomass10.1016/S0960-8524(01)00118-3 ↗
10. Steam gasification of Cynara cardunculus L.: influence of variables10.1016/S0378-3820(01)00247-8 ↗
11. The importance of the fuel choice on the efficiency of a solid oxide fuel cell system10.1016/S0378-7753(03)00559-7 ↗
12. Fuel flexibility study of an integrated 25kW SOFC reformer system10.1016/j.jpowsour.2004.11.068 ↗
13. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
14. An integrated SOFC plant dynamic model for power systems simulation10.1016/S0378-7753(99)00430-9 ↗
15. SOFC-APU systems for aircraft: a review10.1016/j.ijhydene.2018.07.004 ↗
16. Development of parametric mass and volume models for an aerospace SOFC/gas turbine hybrid system
17. Direct ethanol fuel cells for transport and stationary applications - a comprehensive review10.1016/j.apenergy.2015.02.002 ↗
18. Direct utilization of liquid fuels in SOFC for portable Applications: challenges for the selection of alternative anodes10.3390/en20200377 ↗
19. Liquids-to-Power using low-temperature solid oxide fuel cells10.1002/ente.201800408 ↗
20. Direct alcohol-fueled low-temperature solid oxide fuel cells: a review10.1002/ente.201700777 ↗
21. Recent advances in the development of anode materials for solid oxide fuel cells utilizing liquid oxygenated hydrocarbon fuels: a mini review10.1002/ente.201700738 ↗
22. Advances in Medium and High Temperature Solid Oxide Fuel Cell Technology, n.d. https://link.springer.com/book/10.1007/978-3-319-46146-5 (accessed August 10, 2022).
23. Estimation of forest area near deserts - production of Global Bio-Methanol from solar energy10.1016/S0306-2619(00)00038-6 ↗
24. Temperature effect on continuous gasification of microalgal biomass: theoretical yield of methanol production and its energy balance10.1016/S0920-5861(98)00275-2 ↗
25. Secretariat · 2011
26. Sugarcane straw availability, quality, recovery and energy use: a literature review10.1016/j.biombioe.2013.03.007 ↗
27. Adams · 2004
28. Direct ethylene glycol fuel-cell stack-Study of oxidation intermediate products10.1016/j.jpowsour.2007.07.054 ↗
29. Sustainable hydrogen production via reforming of ethylene glycol using a novel spouted bed reactor10.1016/j.cattod.2007.05.018 ↗
30. Microwave-assisted pyrolysis of microalgae for biofuel production10.1016/j.biortech.2011.01.055 ↗
31. The direct pyrolysis and catalytic pyrolysis of Nannochloropsis sp. residue for renewable bio-oils10.1016/j.biortech.2010.01.070 ↗
32. High yield bio-oil production from fast pyrolysis by metabolic controlling of Chlorella protothecoides10.1016/j.jbiotec.2004.01.013 ↗
33. Development of cathodes for methanol and ethanol fuelled low temperature (300-600°C) solid oxide fuel cells10.1016/j.ijhydene.2006.12.012 ↗
34. Catalytic production of hydrogen from methanol10.1016/S0920-5861(00)00311-4 ↗
35. Direct utilization of methanol in solid oxide fuel cells: an electrochemical and catalytic study10.1016/j.ijhydene.2011.05.053 ↗
36. Biodiesel production by supercritical process with crude bio-methanol prepared by wood gasification10.1016/j.biortech.2007.09.056 ↗
37. Chapter three - liquid biofuels
38. Pretreatment of rice straw for ethanol production by a two-step process using dilute sulfuric acid and sulfomethylation reagent10.1016/j.apenergy.2015.05.008 ↗
39. Evolution retrospective for alternative fuels: first to fourth generation10.1016/j.renene.2014.02.044 ↗
40. Metabolic engineering of algae for fourth generation biofuels production10.1039/c0ee00593b ↗
41. Ethylene glycol as a new sustainable fuel for solid oxide fuel cells with conventional nickel-based anodes10.1016/j.apenergy.2015.03.051 ↗
42. A review of thermochemical conversion of microalgae10.1016/j.rser.2013.06.032 ↗
43. Biofuels from microalgae-A review of technologies for production, processing, and extractions of biofuels and co-products10.1016/j.rser.2009.10.009 ↗
44. A review of production and upgrading of algal bio-oil10.1016/j.rser.2015.12.342 ↗
45. Comparison between ceria-zirconia and alumina as supports for oxidative steam reforming of biodiesel10.1007/s11244-015-0461-2 ↗
46. Pyrolysis of biomass to produce fuels and chemical feedstocks10.1016/S0196-8904(03)00177-8 ↗
47. Recent progress on upgrading of bio-oil to hydrocarbons over metal/zeolite bifunctional catalysts10.1039/C7CY00574A ↗
48. Feasibility of tubular solid oxide fuel cells directly running on liquid biofuels10.1016/j.ces.2016.04.024 ↗
49. Poisoning of SOFC anodes by various fuel impurities10.1016/j.ssi.2008.02.062 ↗
50. Solid oxide fuel cell anode degradation by the effect of siloxanes10.1016/j.jpowsour.2015.01.053 ↗
51. T.L. Alleman, R.L. McCormick, E.D. Christensen, G. Fioroni, K. Moriart, J. Yanowitz, Biodiesel Handling and Use Guide (fifth ed.), (n.d.) 72.
52. Understanding the impact of sulfur poisoning on the methane-reforming activity of a solid oxide fuel cell anode10.1021/acscatal.1c02470 ↗
53. Direct hydrocarbon solid oxide fuel cells10.1021/cr020725g ↗
54. Fuel options for solid oxide fuel cells: a thermodynamic analysis10.1002/aic.690490123 ↗
55. Key characteristics of a hydrocarbon-fueled solid oxide fuel cell examined by local thermodynamic states10.1016/j.enconman.2018.08.064 ↗
56. Equilibria in fuel cell gases : I. Equilibrium compositions and reforming conditions10.1149/1.1577337 ↗
57. Equilibria in fuel cell gases : II. The C-H-O ternary diagrams10.1149/1.1577338 ↗
58. Thermal modelling of ethanol-fuelled solid oxide fuel cells10.1016/j.apenergy.2019.01.025 ↗
59. Modeling analysis of different renewable fuels in an anode supported SOFC10.1115/1.4002618 ↗
60. Progress in material selection for solid oxide fuel cell technology: a review10.1016/j.pmatsci.2015.01.001 ↗
61. Alternative anode materials for solid oxide fuel cells10.1016/j.jpowsour.2007.08.011 ↗
62. Quantitative study on solid oxide fuel cell anode microstructure stability based on 3D microstructure reconstructions10.1016/j.jpowsour.2020.228653 ↗
63. The 3D reconstruction and simulation of solid oxide fuel cell anode10.1149/10301.1213ecst ↗
64. Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique10.1016/j.jpowsour.2009.09.005 ↗
65. Modelling the triple phase boundary length in infiltrated SOFC electrodes10.1016/j.ijhydene.2017.10.004 ↗
66. Enhanced triple-phase boundary density in infiltrated electrodes for solid oxide fuel cells demonstrated by high-resolution tomography10.1016/j.jpowsour.2014.05.038 ↗
67. SOFC anodes based on infiltration of La0.3Sr0.7TiO310.1149/1.2976775 ↗
68. Insights into the design of SOFC infiltrated electrodes with optimized active TPB density via mechanistic modeling10.1149/2.0311412jes ↗
69. Equilibria in fuel cell gases
70. Layered oxygen-deficient double perovskite as an efficient and stable anode for direct hydrocarbon solid oxide fuel cells10.1038/nmat4166 ↗
71. LaNiO3 perovskite catalyst precursor for rapid decomposition of methane: influence of temperature and presence of H2 in feed stream10.1016/j.cattod.2011.03.080 ↗
72. Horizontally aligned carbon nanotube arrays: growth mechanism, controlled synthesis, characterization, properties and applications10.1039/C7CS00104E ↗
73. Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets10.1016/S0378-7753(02)00471-8 ↗
74. Carbon deposition on Ni/YSZ composites exposed to humidified methane10.1016/j.apcata.2006.10.040 ↗
75. Strategies for improving the performance and stability of Ni-based catalysts for reforming reactions10.1039/C4CS00223G ↗
76. Deactivating Carbon Formation on a Ni/Al2O3 catalyst under methanation conditions10.1021/acs.jpcc.7b03754 ↗
77. Operando Raman spectroscopy on CO2 methanation over alumina-supported Ni, Ni3Fe and NiRh0.1 catalysts: role of carbon formation as possible deactivation pathway10.1016/j.apcata.2018.01.026 ↗
78. CO methanation over TiO2-supported nickel catalysts: a carbon formation study10.1016/j.apcata.2015.06.029 ↗
79. Nature and role of carbon species during CO and CO-H2 reactions over Ni/SiO2 catalysts
80. Ordered mesoporous alumina supported nickel based catalysts for carbon dioxide reforming of methane10.1016/j.ijhydene.2012.01.105 ↗
81. CO hydrogenation on a nickel catalyst: II. A mechanistic study by transient kinetics and infrared spectroscopy10.1006/jcat.1998.1978 ↗
82. Deactivation of nickel-based catalysts during CO methanation and disproportionation10.1016/0021-9517(87)90294-6 ↗
83. Synergism of Co and Mo in the catalytic production of single-wall carbon nanotubes by decomposition of CO10.1016/S0008-6223(00)00173-1 ↗
84. Assessment of nickel cermets and La0.8Sr0.2Sc0.2Mn0.8O3 as solid-oxide fuel cell anodes operating on carbon monoxide fuel10.1016/j.jpowsour.2009.09.015 ↗
85. Reformate-operated SOFC anode performance and degradation considering solid carbon formation: a modeling and simulation study10.1016/j.electacta.2014.07.136 ↗
86. CO dissociation on Ni: the effect of steps and of nickel carbonyl10.1016/j.susc.2007.12.008 ↗
87. Direct versus hydrogen-assisted CO dissociation10.1021/ja9044482 ↗
88. Elementary reaction kinetics of the CO ∕ CO2 ∕ Ni ∕ YSZ electrode
89. Catalytic activity of infiltrated La0.3Sr0.7Ti0.3Fe0.7O3-δ-CeO2 as a composite SOFC anode material for H2 and CO oxidation10.1016/j.ijhydene.2017.05.016 ↗
90. The role of carbon deposition from CO dissociation on platinum crystal surfaces during catalytic CO oxidation: effects on turnover rate, ignition temperature, and vibrational spectra10.1021/jp014679k ↗
91. Elementary steps in Fischer-Tropsch synthesis: CO bond scission, CO oxidation and surface carbiding on Co(0001)10.1016/j.susc.2015.10.050 ↗
92. Steam reforming of liquid hydrocarbons
93. Effects of low hydrocarbons on the solid oxide fuel cell anode10.1007/s10008-010-1078-9 ↗
94. Ethylene dissociation on flat and stepped Ni(111): a combined STM and DFT study10.1016/j.susc.2005.10.006 ↗
95. Experimental characterization of CCH(ads) and CCH2(ads) during the thermal decomposition of methane and ethylene on Ru(0 0 0 1)10.1002/cctc.201501046 ↗
96. Formation of two kinds of carbon with different properties by acetone decomposition using in-liquid plasma method10.1016/j.ijhydene.2019.07.107 ↗
97. High-pressure C-H-O diagrams: fuel composition, carbon deposition, and open circuit voltage of pressurized SOFCs10.1016/j.ijhydene.2017.10.122 ↗
98. Impact of the structure and reactivity of nickel particles on the catalytic growth of carbon nanofibers10.1016/S0920-5861(02)00209-2 ↗
99. CO2 dry reforming of CH4 with Sr and Ni co-doped LaCrO3 perovskite catalysts10.1016/j.apsusc.2019.144699 ↗
100. A high performance, anode-supported solid oxide fuel cell operating on direct alcohol10.1149/1.1375166 ↗